GS101's Connectivity Peripheral blocks (peric0/1 blocks) which
include the I3C and USI (I2C, SPI, UART) only allow 32-bit
register accesses. If using 8-bit register accesses, a SError
Interrupt is raised causing the system unusable.
Instead of specifying the reg-io-width = 4 everywhere, for each node,
the requirement should be deduced from the compatible.
Prepare the samsung tty driver to allow IO types different than
UPIO_MEM. ``struct uart_port::iotype`` is an unsigned char where all
its 8 bits are exposed to uapi. We can't make NULL checks on it to
verify if it's set, thus always set it from the driver's data.
Use u8 for the ``iotype`` member of ``struct s3c24xx_uart_info`` to
emphasize that the iotype is an 8 bit mask.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
drivers/tty/serial/samsung_tty.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 71d17d804fda..b8fe9df20202 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -84,6 +84,7 @@ struct s3c24xx_uart_info {
unsigned long clksel_mask;
unsigned long clksel_shift;
unsigned long ucon_mask;
+ u8 iotype;
/* uart port features */
@@ -1742,7 +1743,6 @@ static void s3c24xx_serial_init_port_default(int index) {
spin_lock_init(&port->lock);
- port->iotype = UPIO_MEM;
port->uartclk = 0;
port->fifosize = 16;
port->flags = UPF_BOOT_AUTOCONF;
@@ -1989,6 +1989,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
break;
}
+ ourport->port.iotype = ourport->info->iotype;
+
if (np) {
of_property_read_u32(np,
"samsung,uart-fifosize", &ourport->port.fifosize);
@@ -2399,6 +2401,7 @@ static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
.name = "Samsung S3C6400 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM,
.fifosize = 64,
.has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
@@ -2428,6 +2431,7 @@ static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.name = "Samsung S5PV210 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM,
.has_divslot = 1,
.rx_fifomask = S5PV210_UFSTAT_RXMASK,
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
@@ -2457,6 +2461,7 @@ static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.name = "Samsung Exynos UART", \
.type = TYPE_S3C6400, \
.port_type = PORT_S3C6400, \
+ .iotype = UPIO_MEM, \
.has_divslot = 1, \
.rx_fifomask = S5PV210_UFSTAT_RXMASK, \
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
@@ -2517,6 +2522,7 @@ static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
.name = "Apple S5L UART",
.type = TYPE_APPLE_S5L,
.port_type = PORT_8250,
+ .iotype = UPIO_MEM,
.fifosize = 16,
.rx_fifomask = S3C2410_UFSTAT_RXMASK,
.rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
@@ -2546,6 +2552,7 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
.name = "Axis ARTPEC-8 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM,
.fifosize = 64,
.has_divslot = 1,
.rx_fifomask = S5PV210_UFSTAT_RXMASK,
--
2.43.0.472.g3155946c3a-goog
