[PATCH v7 0/7] Fixes and improvements for RS485

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The following series includes some fixes and improvements around RS485 in
the serial core and UART drivers:

Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
Patch 2: set missing supported flag for RX during TX GPIO
Patch 3: fix sanitizing check for RTS settings
Patch 4: make sure RS485 is cannot be enabled when it is not supported
Patch 5: imx: do not set RS485 enabled if it is not supported
Patch 6: omap: do not override settings for rs485 support
Patch 7: exar: set missing RS485 supported flag

Changes in v7:
- fix errorneous condition in stm32 driver for setting the
SER_RS485_RX_DURING_TX flag (pointed out by Maarten)
- fix compilation issue spotted by kernel test robot

Changes in v6:
- restore RS485 GPIO settings if setting rs485 configuration fails
(pointed out by Ilpo)
- drop change for uart_get_rs485_config() 
- rephrase and correct commit messages (pointed out by Ilpo)
- remove unnecessary structure nullification (suggested by Ilpo)
- move all RS485 tasks into one function (suggested by Ilpo)

Changes in v5:

- do not combine the functions that set the RS484 GPIOs (as Hugo originally
  suggested)

Changes in v4:

- add comment for function uart_set_rs485_gpios after hint from Hugo
- correct commit message as pointed out by Hugo
- rephrase commit messages
- add patch 7 after discussion with Ilpo

Changes in v3
- Drop patch "Get rid of useless wrapper pl011_get_rs485_mode()" as
  requested by Greg

Changes in v2:
- add missing 'Fixes' tags as requested by Greg
- corrected a typo as pointed out by Hugo
- fix issue in imx driver in the serial core as suggested by Uwe
- partly rephrase some commit messages
- add patch 7


Lino Sanfilippo (7):
  serial: Do not hold the port lock when setting rx-during-tx GPIO
  serial: core: set missing supported flag for RX during TX GPIO
  serial: core: fix sanitizing check for RTS settings
  serial: core: make sure RS485 cannot be enabled when it is not
    supported
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: omap: do not override settings for RS485 support
  serial: 8250_exar: Set missing rs485_supported flag

 drivers/tty/serial/8250/8250_exar.c |  5 ++-
 drivers/tty/serial/imx.c            | 11 ------
 drivers/tty/serial/omap-serial.c    | 27 +++++++------
 drivers/tty/serial/serial_core.c    | 61 +++++++++++++++++++++++------
 drivers/tty/serial/stm32-usart.c    |  8 +---
 5 files changed, 67 insertions(+), 45 deletions(-)


base-commit: 610a9b8f49fbcf1100716370d3b5f6f884a2835a
-- 
2.43.0





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux