From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
15 MHz is supported only by 76x variants.
If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.
Also use HZ_PER_MHZ macro to improve readability.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 798fa115b28a..ced2446909a2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <uapi/linux/sched/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
@@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
- spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
--
2.39.2
