On Thu, 7 Dec 2023 20:24:45 +0200
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Thu, Dec 7, 2023 at 7:52 PM Hugo Villeneuve <hugo@xxxxxxxxxxx> wrote:
> > On Wed, 6 Dec 2023 14:29:39 +0800
> > kernel test robot <lkp@xxxxxxxxx> wrote:
>
> ...
>
> > > drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_i2c_probe':
> > > >> drivers/tty/serial/sc16is7xx.c:1703:41: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
> > > 1703 | snprintf(buf, sizeof(buf), "port%u", port_id);
> > > | ^~
> > > In function 'sc16is7xx_regmap_name',
> > > inlined from 'sc16is7xx_i2c_probe' at drivers/tty/serial/sc16is7xx.c:1805:17:
> > > drivers/tty/serial/sc16is7xx.c:1703:36: note: directive argument in the range [0, 4294967294]
> > > 1703 | snprintf(buf, sizeof(buf), "port%u", port_id);
> > > | ^~~~~~~~
> > > drivers/tty/serial/sc16is7xx.c:1703:9: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
> > > 1703 | snprintf(buf, sizeof(buf), "port%u", port_id);
> > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Hi,
> > the only solution I could find is to add this line just before snprintf:
> >
> > BUG_ON(port_id > MAX310X_MAX_PORTS);
> >
> > it allows us to have the smallest buffer size possible.
> >
> > One other solution would be to change port_id from "unsigned int"
> > to "u8", and increase the buffer by an additional 2 bytes to silence
> > the warning, but then wasting 2 bytes for each channel, like so:
>
> I didn't get this. It's a buffer that is rewritten on each port (why
> is it even static?). Just make sure it's enough for any given number
> and drop the static.
Yes, using static is not appropriate, as regmap will copy each name
into its internal buffer.
I will drop the static and refactor the code accordingly.
> While at it, can you look at the following items to improve?
> - sc16is7xx_alloc_line() can be updated to use IDA framework
> - move return xxx; to the default cases in a few functions
> - if (div > 0xffff) { --> if (div >= BIT(16)) { as it better shows why
> the limit is that (we have only 16 bits for the divider)
> - do {} while (0) in the sc16is7xx_port_irq, WTH?!
> - while (1) { -- do { } while (keep_polling); in sc16is7xx_irq()
> - use in_range() in sc16is7xx_setup_mctrl_ports() ? (maybe not, dunno)
> - for (i--; i >= 0; i--) { --> while (i--) {
> - use spi_get_device_match_data() and i2c_get_match_data()
> - 15000000 --> 15 * HZ_PER_MHZ ?
> - dropping MODULE_ALIAS (and fix the ID tables, _if_ needed)
> - split the code to the core / main + SPI + I2C glue drivers
>
> * These just come on the first glance at the code, perhaps there is
> more room to improve.
Ok, no problem, I will have a look at it.
Thank you,
Hugo Villeneuve
