On Mon, 16 Oct 2023 14:32:07 +1300, Richard Laing wrote: > An issue has been observed on the Broadcom BCM56160 serial port which > appears closely related to a similar issue on the Marvell Armada 38x > serial port. > > Add a new property to force the TX FIFO to be drained before > changing the UART_LCR. > > Signed-off-by: Richard Laing <richard.laing@xxxxxxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/serial/snps-dw-apb-uart.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml:120:5: [error] syntax error: could not find expected ':' (syntax) dtschema/dtc warnings/errors: make[2]: *** Deleting file 'Documentation/devicetree/bindings/serial/snps-dw-apb-uart.example.dts' Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml:120:5: could not find expected ':' make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/serial/snps-dw-apb-uart.example.dts] Error 1 make[2]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml:120:5: could not find expected ':' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml: ignoring, error parsing file make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2 make: *** [Makefile:234: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231016013207.2249946-3-richard.laing@xxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
