On Thu, Sep 21, 2023 at 10:13:33PM +0100, Cameron Williams wrote: > Add support for the rest of the Brainboxes range of serial cards, > except the 3-port variants as there is no suitable configuration > in this driver. > > - The pci_ids.h file has been updated to define each card's ID, cleaner > than using the raw ID. That's not happening in this patch, are you sure you got this correct? > - IntaShield IS-200 PCI ID comment corrected > - Added some missing device revision IDs > - All Oxford Semiconductor-based revisions of the cards had broken baud > rates, as they were tested against the same card on another PC which had > the same broken baud rate. After adding the correct init and setup quirks > these have now been re-tested against a third-party FTDI-based USB > converter and work fine. Thanks to Maciej W. Rozycki for clarification on > this IC. This all needs to be broken up into smaller changes, one per logical thing, for us to be able to take them. thanks, greg k-h
