On Tue, Sep 12, 2023 at 07:51:49AM +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Add documentation for pin controller found on RZ/G3S (R9A08G045) SoC.
> Compared with RZ/G2{L,UL} RZ/G3S has 82 general-purpose IOs, no slew
> rate and output impedance support and more values for drive strength
> which needs to be expressed in microamp.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
> .../pinctrl/renesas,rzg2l-pinctrl.yaml | 26 +++++++++++++++----
> 1 file changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> index 145c5442f268..079e5be69330 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -25,6 +25,7 @@ properties:
> - enum:
> - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
> - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
> + - renesas,r9a08g045-pinctrl # RZ/G3S
>
> - items:
> - enum:
> @@ -77,6 +78,26 @@ additionalProperties:
> - $ref: pincfg-node.yaml#
> - $ref: pinmux-node.yaml#
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - renesas,r9a08g045-pinctrl
> + then:
> + properties:
> + drive-strength-microamp:
> + enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700,
> + 5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000,
> + 10000 ]
> + else:
> + properties:
> + drive-strength:
> + enum: [ 2, 4, 8, 12 ]
> + output-impedance-ohms:
> + enum: [ 33, 50, 66, 100 ]
> + slew-rate: true
> +
> description:
> Pin controller client devices use pin configuration subnodes (children
> and grandchildren) for desired pin configuration.
> @@ -89,14 +110,9 @@ additionalProperties:
> alternate function configuration number using the RZG2L_PORT_PINMUX()
> helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
> pins: true
> - drive-strength:
> - enum: [ 2, 4, 8, 12 ]
> - output-impedance-ohms:
> - enum: [ 33, 50, 66, 100 ]
Removing these entries will break things. Except that this binding is
missing 'additionalProperties: false' at this level. That should be
fixed first.
I would suggest you keep these here and make the if/then schema just not
allow properties (e.g. "drive-strength-microamp: false").
> power-source:
> description: I/O voltage in millivolt.
> enum: [ 1800, 2500, 3300 ]
> - slew-rate: true
> gpio-hog: true
> gpios: true
> input-enable: true
> --
> 2.39.2
>
