From: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
Add support for break control to the stm32 serial driver.
Signed-off-by: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
Signed-off-by: Valentin Caron <valentin.caron@xxxxxxxxxxx>
---
drivers/tty/serial/stm32-usart.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 5e9cf0c48813..d03ec69d79fc 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1047,9 +1047,20 @@ static void stm32_usart_stop_rx(struct uart_port *port)
stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq);
}
-/* Handle breaks - ignored by us */
static void stm32_usart_break_ctl(struct uart_port *port, int break_state)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (break_state)
+ stm32_usart_set_bits(port, ofs->rqr, USART_RQR_SBKRQ);
+ else
+ stm32_usart_clr_bits(port, ofs->rqr, USART_RQR_SBKRQ);
+
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int stm32_usart_startup(struct uart_port *port)
--
2.25.1
