Re: [PATCH v2] Revert "tty: serial: meson: Add a earlycon for the T7 SoC"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 28/08/2023 10:20, Dmitry Rokosov wrote:
On Sun, Aug 27, 2023 at 11:31:35AM +0100, Lucas Tanure wrote:
On 27-08-2023 11:23, Neil Armstrong wrote:
Hi Lucas,

Le 27/08/2023 à 12:04, Lucas Tanure a écrit :
On 27-08-2023 10:48, Neil Armstrong wrote:
Hi Lucas,

Le 27/08/2023 à 10:29, Lucas Tanure a écrit :
This reverts commit 6a4197f9763325043abf7690a21124a9facbf52e.
New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't
need a OF_EARLYCON_DECLARE.

Signed-off-by: Lucas Tanure <tanure@xxxxxxxxx>
---
Since V1:
- add Signed-off-by:

   drivers/tty/serial/meson_uart.c | 2 --
   1 file changed, 2 deletions(-)

diff --git a/drivers/tty/serial/meson_uart.c
b/drivers/tty/serial/meson_uart.c
index c4f61d82fb727..790d910dafa5d 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -648,8 +648,6 @@ meson_serial_early_console_setup(struct
earlycon_device *device, const char *opt
   OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
               meson_serial_early_console_setup);
-OF_EARLYCON_DECLARE(meson, "amlogic,t7-uart",
-            meson_serial_early_console_setup);
   #define MESON_SERIAL_CONSOLE_PTR(_devname)
(&meson_serial_console_##_devname)
   #else

How do you use earlycon with this removed ?

Neil
This is my kernel cmdline:
console=ttyS0,921600 no_console_suspend earlycon=ttyS0,0xfe078000

And I can see my log:
boot 64bit kernel
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd092]
[    0.000000] Linux version 6.5.0-rc7-next-20230825+
(tanureal@ryzen) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the
A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621,
GNU ld (GNU Toolchain fo3
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: Khadas vim4
[    0.000000] OF: reserved mem:
0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable
secmon@5000000
[    0.000000] OF: reserved mem:
0x0000000005300000..0x00000000072fffff (32768 KiB) nomap
non-reusable secmon@5300000
...
[    0.079368] io scheduler mq-deadline registered
[    0.079374] io scheduler kyber registered
[    0.079549] io scheduler bfq registered
[    0.083373] fe078000.serial: ttyS0 at MMIO 0xfe078000 (irq = 14,
base_baud = 1500000) is a meson_uart
[    0.083403] printk: console [ttyS0] enabled

As the log is OK, and T7 for now is binding against S4 code we
should drop this patch and add a S4 one if needed.

But just having this log is not enough for testing earlycon?
I am assuming that by just having the log since 0.0000 is a good
sign that earlycon is working.
Could you give further guidance?

First the kernel argument is simply "earlycon" with no other options,
the earlycon code will fetch the first uart using the DT
/chosen/stdout-path property.

Then you should see something like right after "Machine model":
[    0.000000] earlycon: meson0 at MMIO 0x00000000ff803000 (options
'115200n8')

The boot log you share doesn't use earlycon, it waits until all
depedency of the UART
has been probed before probing the UART driver and prints the whole boot
log.

Earlycon is a mechanism to use the UART HW as configured by the
bootloader in
a minimal way very early in the boot in order to detect very early lockups.

Keeping OF_EARLYCON_DECLARE for t7 would enable this.

Neil


Lucas Tanure


But then we would need to add Earlycon for S4 too.
How can we add one Earlycon for all future SoCs, like S4 and T7?


Per my understanding, you just need to declare UART dts node with the
following compatible string: "amlogic,meson-ao-uart". It will enabled
earlycon. There is no neccessary to declare separate
OF_EARLYCON_DECLARE(). It's working okay for A1 dts:

This works on A1 because uart_AO_B is an Always-On UART, and using amlogic,meson-ao-uart
is corrent.
But for S4 & T7, Amlogic dropped the Always-On power domain, so there's no more AO uarts,
so using amlogic,meson-ao-uart on those is abusing the DT to enable a driver functionality.

So the solution is to add those OF_EARLYCON_DECLARE and only use the correct
/chosen/stdout-path property.

Neil



meson-a1.dtsi uart declaration:
	uart_AO_B: serial@2000 {
		compatible = "amlogic,meson-a1-uart",
			     "amlogic,meson-ao-uart";
		reg = <0x0 0x2000 0x0 0x18>;
		interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
		clocks = <&xtal>, <&xtal>, <&xtal>;
		clock-names = "xtal", "pclk", "baud";
		status = "disabled";
	};

earlycon declaration from dts:
	aliases {
		serial0 = &uart_AO_B;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};


_______________________________________________
linux-amlogic mailing list
linux-amlogic@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-amlogic





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux