On 27/08/2023 12:31, Lucas Tanure wrote:
On 27-08-2023 11:23, Neil Armstrong wrote:
Hi Lucas,
Le 27/08/2023 à 12:04, Lucas Tanure a écrit :
On 27-08-2023 10:48, Neil Armstrong wrote:
Hi Lucas,
Le 27/08/2023 à 10:29, Lucas Tanure a écrit :
This reverts commit 6a4197f9763325043abf7690a21124a9facbf52e.
New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't need a OF_EARLYCON_DECLARE.
Signed-off-by: Lucas Tanure <tanure@xxxxxxxxx>
---
Since V1:
- add Signed-off-by:
drivers/tty/serial/meson_uart.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index c4f61d82fb727..790d910dafa5d 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -648,8 +648,6 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt
OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
meson_serial_early_console_setup);
-OF_EARLYCON_DECLARE(meson, "amlogic,t7-uart",
- meson_serial_early_console_setup);
#define MESON_SERIAL_CONSOLE_PTR(_devname) (&meson_serial_console_##_devname)
#else
How do you use earlycon with this removed ?
Neil
This is my kernel cmdline:
console=ttyS0,921600 no_console_suspend earlycon=ttyS0,0xfe078000
And I can see my log:
boot 64bit kernel
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd092]
[ 0.000000] Linux version 6.5.0-rc7-next-20230825+ (tanureal@ryzen) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain fo3
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Khadas vim4
[ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000
[ 0.000000] OF: reserved mem: 0x0000000005300000..0x00000000072fffff (32768 KiB) nomap non-reusable secmon@5300000
...
[ 0.079368] io scheduler mq-deadline registered
[ 0.079374] io scheduler kyber registered
[ 0.079549] io scheduler bfq registered
[ 0.083373] fe078000.serial: ttyS0 at MMIO 0xfe078000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 0.083403] printk: console [ttyS0] enabled
As the log is OK, and T7 for now is binding against S4 code we should drop this patch and add a S4 one if needed.
But just having this log is not enough for testing earlycon?
I am assuming that by just having the log since 0.0000 is a good sign that earlycon is working.
Could you give further guidance?
First the kernel argument is simply "earlycon" with no other options,
the earlycon code will fetch the first uart using the DT /chosen/stdout-path property.
Then you should see something like right after "Machine model":
[ 0.000000] earlycon: meson0 at MMIO 0x00000000ff803000 (options '115200n8')
The boot log you share doesn't use earlycon, it waits until all depedency of the UART
has been probed before probing the UART driver and prints the whole boot log.
Earlycon is a mechanism to use the UART HW as configured by the bootloader in
a minimal way very early in the boot in order to detect very early lockups.
Keeping OF_EARLYCON_DECLARE for t7 would enable this.
Neil
Lucas Tanure
But then we would need to add Earlycon for S4 too.
How can we add one Earlycon for all future SoCs, like S4 and T7?
As of today, S4 has an UART with amlogic,meson-ao-uart as fallback compatibl,
but if there's no AO UART on S4, then this is wrong and yes a new OF_EARLYCON_DECLARE
with amlogic,meson-s4-uart should be added.
Neil
