On Tue, Aug 8, 2023 at 9:25 PM Andy Shevchenko <andy@xxxxxxxxxx> wrote: > > On Tue, Aug 08, 2023 at 11:31:44AM +0800, Wenhua Lin wrote: > > Clear interrupt after set the interrupt type. > > Why? > > Can't it be done in the ->init_hw() callback of GPIO IRQ chip? Hi Andy: The initialization state of EIC is high-level trigger. If the external level is high and the interrupt condition is met, EIC has a latch function. If the module registers the eic interrupt, an interrupt will be generated immediately as soon as the eic interrupt is enabled. To solve this problem, our processing method is to clear the interrupt once when setting the interrupt trigger type, in order to avoid that this interrupt is the last interrupt. Thanks Wenhua.Lin > > -- > With Best Regards, > Andy Shevchenko > >
