Hi Ben
On Tue, Aug 8, 2023 at 4:47 PM Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> wrote:
>
> On 08/08/2023 08:26, Nick Hu wrote:
> > If the Sifive Uart is not used as the wake up source, suspend the uart
> > before the system enter the suspend state to prevent it woken up by
> > unexpected uart interrupt. Resume the uart once the system woken up.
> >
> > Signed-off-by: Nick Hu <nick.hu@xxxxxxxxxx>
> > Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
>
> ^ This should be Reviewed-by, as I did review on this earlier.
>
I'll correct it in V2
> > ---
> > drivers/tty/serial/sifive.c | 26 ++++++++++++++++++++++++++
> > 1 file changed, 26 insertions(+)
> >
> > diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
> > index a19db49327e2..87994cb69007 100644
> > --- a/drivers/tty/serial/sifive.c
> > +++ b/drivers/tty/serial/sifive.c
> > @@ -1022,6 +1022,31 @@ static int sifive_serial_remove(struct platform_device *dev)
> > return 0;
> > }
> >
> > +static int sifive_serial_suspend(struct device *dev)
> > +{
> > + int ret = 0;
> > + struct sifive_serial_port *ssp = dev_get_drvdata(dev);
>
> Minor annyonance is ordering of ssp and ret, I think the showrter one
> last is the nicest looking.
>
> > + if (ssp && ssp->port.type != PORT_UNKNOWN)
> > + ret = uart_suspend_port(&sifive_serial_uart_driver, &ssp->port);
>
> Do we really need a test for ssp being valid if the device is bound.
> Not sure if the port.type is also useful?
>
You are right. This might be an unnecessary check.
The ssp is bound in the probe function and the PORT_UNKNOWN only be
set when we do the sifive_serial_remove().
And for the ordering of ret, We don't need the ret if we move the check.
We can just return uart_suspend_port(&sifive_serial_uart_driver, &ssp->port);
Will correct it in V2.
> > + return ret;
> > +}
> > +
> > +static int sifive_serial_resume(struct device *dev)
> > +{
> > + int ret = 0;
> > + struct sifive_serial_port *ssp = dev_get_drvdata(dev);
> > +
> > + if (ssp && ssp->port.type != PORT_UNKNOWN)
> > + ret = uart_resume_port(&sifive_serial_uart_driver, &ssp->port);
> > +
> > + return ret;
> > +}
> > +
> > +DEFINE_SIMPLE_DEV_PM_OPS(sifive_uart_pm_ops, sifive_serial_suspend,
> > + sifive_serial_resume);
> > +
> > static const struct of_device_id sifive_serial_of_match[] = {
> > { .compatible = "sifive,fu540-c000-uart0" },
> > { .compatible = "sifive,uart0" },
> > @@ -1034,6 +1059,7 @@ static struct platform_driver sifive_serial_platform_driver = {
> > .remove = sifive_serial_remove,
> > .driver = {
> > .name = SIFIVE_SERIAL_NAME,
> > + .pm = pm_sleep_ptr(&sifive_uart_pm_ops),
> > .of_match_table = of_match_ptr(sifive_serial_of_match),
> > },
> > };
>
> --
> Ben Dooks http://www.codethink.co.uk/
> Senior Engineer Codethink - Providing Genius
>
> https://www.codethink.co.uk/privacy.html
>
