On Fri, Jun 16, 2023 at 1:01 AM Yixun Lan <dlan@xxxxxxxxxx> wrote: > > Hi Lucas: > > On 19:29 Thu 15 Jun , Lucas Tanure wrote: > > The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC > > family, on a board with the same form factor as the VIM3 models. > I'd like to see little bit more verbose messages here, like > which functionality/driver added here - cpu, gic, timer, uart? Ok, I add this information in the next version. Its adding CPU, GIC, and UART. > > so, it's capable of booting into a serial console? yes > > > > > - 8GB LPDDR4X 2016MHz > > - 32GB eMMC 5.1 storage > > - 32MB SPI flash > > - 10/100/1000 Base-T Ethernet > > - AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1) > > - HDMI 2.1 video > > - HDMI Input > > - 1x USB 2.0 + 1x USB 3.0 ports > > - 1x USB-C (power) with USB 2.0 OTG > > - 3x LED's (1x red, 1x blue, 1x white) > > - 3x buttons (power, function, reset) > > - M2 socket with PCIe, USB, ADC & I2C > > - 40pin GPIO Header > > - 1x micro SD card slot > > > > Signed-off-by: Lucas Tanure <tanure@xxxxxxxxx> > > --- > > arch/arm64/boot/dts/amlogic/Makefile | 1 + > > .../amlogic/meson-t7-a311d2-khadas-vim4.dts | 112 ++++++++++ > > arch/arm64/boot/dts/amlogic/meson-t7.dtsi | 202 ++++++++++++++++++ > > 3 files changed, 315 insertions(+) > > create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts > > create mode 100644 arch/arm64/boot/dts/amlogic/meson-t7.dtsi > > > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > > index cd1c5b04890a..1c5846bd1ca0 100644 > > --- a/arch/arm64/boot/dts/amlogic/Makefile > > +++ b/arch/arm64/boot/dts/amlogic/Makefile > > @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb > > dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb > > dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb > > dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb > > +dtb-$(CONFIG_ARCH_MESON) += meson-t7-a311d2-khadas-vim4.dtb > > diff --git a/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts > > new file mode 100644 > > index 000000000000..46e175536edf > > --- /dev/null > > +++ b/arch/arm64/boot/dts/amlogic/meson-t7-a311d2-khadas-vim4.dts > > @@ -0,0 +1,112 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (c) 2022 Wesion, Inc. All rights reserved. > > + */ > > + > > +/dts-v1/; > > + > > +#include "meson-t7.dtsi" > > + > > +/ { > > + model = "Khadas VIM4"; > > + > > + aliases { > > + serial0 = &uart_A; > > + }; > > + > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ > > + secmon_reserved: secmon@5000000 { > > + reg = <0x0 0x05000000 0x0 0x300000>; > > + no-map; > > + }; > > + > > + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ > > + secmon_reserved_bl32: secmon@5300000 { > > + reg = <0x0 0x05300000 0x0 0x2000000>; > > + no-map; > > + }; > > + }; > > + > > + xtal: xtal-clk { > > + compatible = "fixed-clock"; > > + clock-frequency = <24000000>; > > + clock-output-names = "xtal"; > > + #clock-cells = <0>; > > + }; > > + > > + vddcpu_a: regulator-vddcpu-a { > > + /* > > + * MP8756GD Regulator. > > + */ > > + compatible = "pwm-regulator"; > > + > > + regulator-name = "VDDCPU_A"; > > + regulator-min-microvolt = <689000>; > > + regulator-max-microvolt = <1049000>; > > + > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + vddcpu_b: regulator-vddcpu-a { > > + /* > > + * MP8756GD Regulator. > > + */ > > + compatible = "pwm-regulator"; > > + > > + regulator-name = "VDDCPU_B"; > > + regulator-min-microvolt = <689000>; > > + regulator-max-microvolt = <1049000>; > > + > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > +}; > > + > > +&clkc{ > > + clocks = <&xtal>; > > + clock-names = "xtal"; > > + status = "okay"; > > +}; > > + > > +&uart_A { > > + status = "okay"; > > +}; > > + > > +&cpu0 { > > + cpu-supply = <&vddcpu_a>; > > +}; > > + > > +&cpu1 { > > + cpu-supply = <&vddcpu_a>; > > +}; > > + > > +&cpu2 { > > + cpu-supply = <&vddcpu_a>; > > +}; > > + > > +&cpu3 { > > + cpu-supply = <&vddcpu_a>; > > +}; > > + > > +&cpu100 { > > + cpu-supply = <&vddcpu_b>; > > +}; > > + > > +&cpu101 { > > + cpu-supply = <&vddcpu_b>; > > +}; > > + > > +&cpu102 { > > + cpu-supply = <&vddcpu_b>; > > +}; > > + > > +&cpu103 { > > + cpu-supply = <&vddcpu_b>; > > +}; > > + > > diff --git a/arch/arm64/boot/dts/amlogic/meson-t7.dtsi b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi > > new file mode 100644 > > index 000000000000..453b3d9cb9d8 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/amlogic/meson-t7.dtsi > > @@ -0,0 +1,202 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. > > + */ > > + > > +#include <dt-bindings/clock/mesont7-clkc.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +/ { > > + compatible = "amlogic,t7"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpus { > > + #address-cells = <0x2>; > > + #size-cells = <0x0>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu100>; > > + }; > > + core1 { > > + cpu = <&cpu101>; > > + }; > > + core2 { > > + cpu = <&cpu102>; > > + }; > > + core3 { > > + cpu = <&cpu103>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + core2 { > > + cpu = <&cpu2>; > > + }; > > + core3 { > > + cpu = <&cpu3>; > > + }; > > + }; > > + }; > > + > > + cpu100: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0 0x100>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <632>; > > + dynamic-power-coefficient = <110>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu101: cpu@101{ > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0 0x101>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <632>; > > + dynamic-power-coefficient = <110>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu102: cpu@102 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0 0x102>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <632>; > > + dynamic-power-coefficient = <110>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu103: cpu@103 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x0 0x103>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <632>; > > + dynamic-power-coefficient = <110>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a73"; > > + reg = <0x0 0x0>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <550>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu1: cpu@1 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a73"; > > + reg = <0x0 0x1>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <550>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu2: cpu@2 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a73"; > > + reg = <0x0 0x2>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <550>; > > + #cooling-cells = <2>; > > + }; > > + > > + cpu3: cpu@3 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a73"; > > + reg = <0x0 0x3>; > > + enable-method = "psci"; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <550>; > > + #cooling-cells = <2>; > > + }; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 0xff08>, > > + <GIC_PPI 14 0xff08>, > > + <GIC_PPI 11 0xff08>, > > + <GIC_PPI 10 0xff08>; > > + }; > > + > > + gic: interrupt-controller@fff01000 { > > + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; > > + #interrupt-cells = <3>; > > + #address-cells = <0>; > > + interrupt-controller; > > + reg = <0x0 0xfff01000 0 0x1000>, > > + <0x0 0xfff02000 0 0x0100>; > > + interrupts = <GIC_PPI 9 0xf04>; > > + }; > > + > > + psci { > > + compatible = "arm,psci-0.2"; > can you double check if it is actual version 0.2? > most recent Amlogic SoC should support psci-1.0 > > > + method = "smc"; > > + }; > > + > > + sm: secure-monitor { > > + compatible = "amlogic,meson-gxbb-sm"; > > + }; > > + > > + soc { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + apb4: apb4@fe000000 { > > + compatible = "simple-bus"; > > + reg = <0x0 0xfe000000 0x0 0x480000>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; > > + > > + clkc: clock-controller { > > + compatible = "amlogic,t7-clkc"; > > + #clock-cells = <1>; > > + reg = <0x0 0x0 0x0 0x49c>, > > + <0x0 0x8000 0x0 0x320>, > > + <0x0 0xe040 0x0 0xbc>; > > + reg-names = "basic", > > + "pll", > > + "cpu_clk"; > > + }; > > + > > + ao-secure@140 { > > + compatible = "amlogic,meson-gx-ao-secure", "syscon"; > > + reg=<0x0 0x10220 0x0 0x140>; > > + amlogic,has-chip-id; > > + }; > > + }; > > + > > + uart_A: serial@fe078000 { > > + compatible = "amlogic,meson-t7-uart"; > > + reg = <0x0 0xfe078000 0x0 0x18>; > > + interrupts = <0 168 1>; > > + status = "disabled"; > > + clocks = <&xtal>, <&clkc CLKID_UART_A>, <&xtal>; > > + clock-names = "xtal", "pclk", "baud"; > > + fifo-size = < 64 >; > > + pinctrl-names = "default"; > > + }; > I believe there are more uart ports, it's worth the effort to add them all in one run, > which sounds more consistent to me, anyway you could also choose to add them > in later patch series, no problem.. Yeah, I prefer to add those uarts later, when I can propper test them. > > > + }; > > +}; > > + > > -- > > 2.41.0 > > > > > > _______________________________________________ > > linux-amlogic mailing list > > linux-amlogic@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/linux-amlogic > > -- > Yixun Lan (dlan) > Gentoo Linux Developer > GPG Key ID AABEFD55