From: Daniel Starke <daniel.starke@xxxxxxxxxxx> Currently, all available structure fields in gsmmux.h except those for gsm_config are commented. Furthermore, no kernel doc comments are used. Fix this by adding appropriate comments to the not commented fields of gsm_config. Convert the comments of the other structs to kernel doc format. Note that 'mru' and 'mtu' refer to the size without basic/advanced option mode header and byte stuffing as defined in the standard in chapter 5.7.2. Link: https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 Signed-off-by: Daniel Starke <daniel.starke@xxxxxxxxxxx> --- include/uapi/linux/gsmmux.h | 104 +++++++++++++++++++++++++++++------- 1 file changed, 84 insertions(+), 20 deletions(-) v4 -> v5: No changes. Please note that I cannot response to emails until August 7th. Felix Haase will take over from our side for questions regarding this patch series or the n_gsm. Link: https://lore.kernel.org/all/20230426080315.7595-2-daniel.starke@xxxxxxxxxxx/ diff --git a/include/uapi/linux/gsmmux.h b/include/uapi/linux/gsmmux.h index e56e2d7ea6eb..3bd6f03a8293 100644 --- a/include/uapi/linux/gsmmux.h +++ b/include/uapi/linux/gsmmux.h @@ -18,6 +18,28 @@ */ #define GSM_FL_RESTART _BITUL(0) +/** + * struct gsm_config - n_gsm basic configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF + * to retrieve and set the basic parameters of an n_gsm ldisc. + * struct gsm_config_ext can be used to configure extended ldisc parameters. + * + * All timers are in units of 1/100th of a second. + * + * @adaption: Convergence layer type + * @encapsulation: Framing (0 = basic option, 1 = advanced option) + * @initiator: Initiator or responder + * @t1: Acknowledgment timer + * @t2: Response timer for multiplexer control channel + * @t3: Response timer for wake-up procedure + * @n2: Maximum number of retransmissions + * @mru: Maximum incoming frame payload size + * @mtu: Maximum outgoing frame payload size + * @k: Window size + * @i: Frame type (1 = UIH, 2 = UI) + * @unused: Can not be used + */ struct gsm_config { unsigned int adaption; @@ -31,18 +53,32 @@ struct gsm_config unsigned int mtu; unsigned int k; unsigned int i; - unsigned int unused[8]; /* Can not be used */ + unsigned int unused[8]; }; #define GSMIOC_GETCONF _IOR('G', 0, struct gsm_config) #define GSMIOC_SETCONF _IOW('G', 1, struct gsm_config) +/** + * struct gsm_netconfig - n_gsm network configuration parameters + * + * This structure is used in combination with GSMIOC_ENABLE_NET and + * GSMIOC_DISABLE_NET to enable or disable a network data connection + * over a mux virtual tty channel. This is for modems that support + * data connections with raw IP frames instead of PPP. + * + * @adaption: Adaption to use in network mode. + * @protocol: Protocol to use - only ETH_P_IP supported. + * @unused2: Can not be used. + * @if_name: Interface name format string. + * @unused: Can not be used. + */ struct gsm_netconfig { - unsigned int adaption; /* Adaption to use in network mode */ - unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */ - unsigned short unused2; /* Can not be used */ - char if_name[IFNAMSIZ]; /* interface name format string */ - __u8 unused[28]; /* Can not be used */ + unsigned int adaption; + unsigned short protocol; + unsigned short unused2; + char if_name[IFNAMSIZ]; + __u8 unused[28]; }; #define GSMIOC_ENABLE_NET _IOW('G', 2, struct gsm_netconfig) @@ -51,27 +87,55 @@ struct gsm_netconfig { /* get the base tty number for a configured gsmmux tty */ #define GSMIOC_GETFIRST _IOR('G', 4, __u32) +/** + * struct gsm_config_ext - n_gsm extended configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_EXT and + * GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an + * n_gsm ldisc. + * + * All timers are in units of 1/100th of a second. + * + * @keep_alive: Control channel keep-alive in 1/100th of a second (0 to disable). + * @wait_config: Wait for DLCI config before opening virtual link? + * @reserved: For future use, must be initialized to zero. + */ struct gsm_config_ext { - __u32 keep_alive; /* Control channel keep-alive in 1/100th of a - * second (0 to disable) - */ - __u32 wait_config; /* Wait for DLCI config before opening virtual link? */ - __u32 reserved[6]; /* For future use, must be initialized to zero */ + __u32 keep_alive; + __u32 wait_config; + __u32 reserved[6]; }; #define GSMIOC_GETCONF_EXT _IOR('G', 5, struct gsm_config_ext) #define GSMIOC_SETCONF_EXT _IOW('G', 6, struct gsm_config_ext) -/* Set channel accordingly before calling GSMIOC_GETCONF_DLCI. */ +/** + * struct gsm_dlci_config - n_gsm channel configuration parameters + * + * This structure is used in combination with GSMIOC_GETCONF_DLCI and + * GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters + * of an n_gsm ldisc. + * + * Set the channel accordingly before calling GSMIOC_GETCONF_DLCI. + * + * @channel: DLCI (0 for the associated DLCI). + * @adaption: Convergence layer type. + * @mtu: Maximum transfer unit. + * @priority: Priority (0 for default value). + * @i: Frame type (1 = UIH, 2 = UI). + * @k: Window size (0 for default value). + * @flags: DLCI specific flags. + * @reserved: For future use, must be initialized to zero. + */ struct gsm_dlci_config { - __u32 channel; /* DLCI (0 for the associated DLCI) */ - __u32 adaption; /* Convergence layer type */ - __u32 mtu; /* Maximum transfer unit */ - __u32 priority; /* Priority (0 for default value) */ - __u32 i; /* Frame type (1 = UIH, 2 = UI) */ - __u32 k; /* Window size (0 for default value) */ - __u32 flags; /* DLCI specific flags. */ - __u32 reserved[7]; /* For future use, must be initialized to zero */ + __u32 channel; + __u32 adaption; + __u32 mtu; + __u32 priority; + __u32 i; + __u32 k; + __u32 flags; + __u32 reserved[7]; }; #define GSMIOC_GETCONF_DLCI _IOWR('G', 7, struct gsm_dlci_config) -- 2.34.1
