Re: [PATCH v10 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 10, 2023, at 03:26, Jacky Huang wrote:
> On 2023/5/9 下午 08:32, Arnd Bergmann wrote:
>> On Tue, May 9, 2023, at 14:25, Ilpo Järvinen wrote:
>>> On Tue, 9 May 2023, Arnd Bergmann wrote:
>>>> On Tue, May 9, 2023, at 12:17, Ilpo Järvinen wrote:
>>>>> On Mon, 8 May 2023, Jacky Huang wrote:
>>>>>> +
>>>>>> +#define UART_NR			17
>>>>>> +
>>>>>> +#define UART_REG_RBR		0x00
>>>>>> +#define UART_REG_THR		0x00
>>>>>> +#define UART_REG_IER		0x04
>>>>>> +#define UART_REG_FCR		0x08
>>>>>> +#define UART_REG_LCR		0x0C
>>>>>> +#define UART_REG_MCR		0x10
>>>>> These duplicate include/uapi/linux/serial_reg.h ones, use the std ones
>>>>> directly.
...
>>
>> There is clearly some family lineage, but there are differences
>> everywhere, and I don't think it was designed by extending a 8250
>> compatible hardware block with extra features, but rather built
>> from scratch (sigh) based only loosely on a register description
>> but then extending it with no intent of retaining compatibility.
>>
>
> Yes, the design of this UART IP is indeed incompatible with the 8250, but it
> does imitate the 8250 in some register and register bit field naming, and
> even in usage definitions, which can easily lead to misunderstandings.
>
> In order to distinguish it from the 8250 and make it clear that it has 
> nothing
> to do with the 8250, I hope you can agree with me not to use the existing
> register and bit field definitions of the 8250 in this driver.
>
> In fact, this UART design has been used for more than 15 years and is used
> in our M0/M23/M4, ARM7/ARM9 MCUs and MPUs. The MA35 series will also
> continue to use this design. I will add the MA35_ prefix to all 
> registers and bit
> fields, and make the modifications suggested by Ilpo that are unrelated to
> this 8250 issue.

Sounds good to me, thanks! It would be good if Jiri or GregKH can also
weigh in to make sure they agree on this approach.

On the topic of tty namespace, please also add the change that I suggested
to pick an unused major/minor number range. I'm not entirely sure about
whether using name="ttyS" is actually preferred here or if you should
pick something else here as well. I see that "ttyN" has no other users
are the moment, though "ttyn" is what drivers/tty/serial/jsm/ has.

Maybe Jiri can also recommend what to pick here.

       Arnd




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux