Dear Ilpo, On 2023/4/25 下午 07:30, Ilpo Järvinen wrote:
On Tue, 25 Apr 2023, Jacky Huang wrote:From: Jacky Huang <ychuang3@xxxxxxxxxxx> The clock controller generates clocks for the whole chip, including system clocks and all peripheral clocks. This driver support ma35d1 clock gating, divider, and individual PLL configuration. There are 6 PLLs in ma35d1 SoC: - CA-PLL for the two Cortex-A35 CPU clock - SYS-PLL for system bus, which comes from the companion MCU and cannot be programmed by clock controller. - DDR-PLL for DDR - EPLL for GMAC and GFX, Display, and VDEC IPs. - VPLL for video output pixel clock - APLL for SDHC, I2S audio, and other IPs. CA-PLL has only one operation mode. DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3 operation modes: integer mode, fraction mode, and spread specturm mode. Signed-off-by: Jacky Huang <ychuang3@xxxxxxxxxxx> --- drivers/clk/Makefile | 1 + drivers/clk/nuvoton/Kconfig | 19 + drivers/clk/nuvoton/Makefile | 4 + drivers/clk/nuvoton/clk-ma35d1-divider.c | 140 ++++ drivers/clk/nuvoton/clk-ma35d1-pll.c | 364 +++++++++ drivers/clk/nuvoton/clk-ma35d1.c | 947 +++++++++++++++++++++++ 6 files changed, 1475 insertions(+) create mode 100644 drivers/clk/nuvoton/Kconfig create mode 100644 drivers/clk/nuvoton/Makefile create mode 100644 drivers/clk/nuvoton/clk-ma35d1-divider.c create mode 100644 drivers/clk/nuvoton/clk-ma35d1-pll.c create mode 100644 drivers/clk/nuvoton/clk-ma35d1.c diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e3ca0d058a25..401f2d800e7f 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -103,6 +103,7 @@ endif obj-y += mstar/ obj-y += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ +obj-y += nuvoton/ obj-$(CONFIG_COMMON_CLK_NXP) += nxp/ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pistachio/ obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ diff --git a/drivers/clk/nuvoton/Kconfig b/drivers/clk/nuvoton/Kconfig new file mode 100644 index 000000000000..9bb811d20b1c --- /dev/null +++ b/drivers/clk/nuvoton/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +# common clock support for Nuvoton SoC family. + +config COMMON_CLK_NUVOTON + bool "Nuvoton clock controller common support" + depends on ARCH_NUVOTON || COMPILE_TEST + default y + help + Say y here to enable common clock controller for Nuvoton platforms. + +if COMMON_CLK_NUVOTON + +config CLK_MA35D1 + bool "Nuvoton MA35D1 clock controller support" + default y + help + Build the clock controller driver for MA35D1 SoC. + +endif diff --git a/drivers/clk/nuvoton/Makefile b/drivers/clk/nuvoton/Makefile new file mode 100644 index 000000000000..d2c092541b8d --- /dev/null +++ b/drivers/clk/nuvoton/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_ARCH_NUVOTON) += clk-ma35d1.o +obj-$(CONFIG_ARCH_NUVOTON) += clk-ma35d1-divider.o +obj-$(CONFIG_ARCH_NUVOTON) += clk-ma35d1-pll.o diff --git a/drivers/clk/nuvoton/clk-ma35d1-divider.c b/drivers/clk/nuvoton/clk-ma35d1-divider.c new file mode 100644 index 000000000000..0d4d8186a85c --- /dev/null +++ b/drivers/clk/nuvoton/clk-ma35d1-divider.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Nuvoton Technology Corp. + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx> + */ + +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> + +struct ma35d1_adc_clk_div { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u32 mask; + const struct clk_div_table *table; + /* protects concurrent access to clock divider registers */ + spinlock_t *lock; +}; + +struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name, + struct clk_hw *parent_hw, spinlock_t *lock, + unsigned long flags, void __iomem *reg, + u8 shift, u8 width, u32 mask_bit); + +static inline struct ma35d1_adc_clk_div *to_ma35d1_adc_clk_div(struct clk_hw *_hw) +{ + return container_of(_hw, struct ma35d1_adc_clk_div, hw); +} + +static inline unsigned long ma35d1_clkdiv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int val; + struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw); + + val = readl_relaxed(dclk->reg) >> dclk->shift; + val &= clk_div_mask(dclk->width); + val += 1; + return divider_recalc_rate(hw, parent_rate, val, dclk->table, + CLK_DIVIDER_ROUND_CLOSEST, dclk->width); +} + +static inline long ma35d1_clkdiv_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *prate) +{ + struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw); + + return divider_round_rate(hw, rate, prate, dclk->table, + dclk->width, CLK_DIVIDER_ROUND_CLOSEST); +} + +static inline int ma35d1_clkdiv_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + int value; + unsigned long flags = 0; + u32 data; + struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw); + + value = divider_get_val(rate, parent_rate, dclk->table, + dclk->width, CLK_DIVIDER_ROUND_CLOSEST); + + spin_lock_irqsave(dclk->lock, flags); + + data = readl_relaxed(dclk->reg); + data &= ~(clk_div_mask(dclk->width) << dclk->shift); + data |= (value - 1) << dclk->shift; + data |= dclk->mask; + writel_relaxed(data, dclk->reg); + + spin_unlock_irqrestore(dclk->lock, flags); + return 0; +} + +static const struct clk_ops ma35d1_adc_clkdiv_ops = { + .recalc_rate = ma35d1_clkdiv_recalc_rate, + .round_rate = ma35d1_clkdiv_round_rate, + .set_rate = ma35d1_clkdiv_set_rate, +}; + +struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name, + struct clk_hw *parent_hw, spinlock_t *lock, + unsigned long flags, void __iomem *reg, + u8 shift, u8 width, u32 mask_bit) +{ + struct ma35d1_adc_clk_div *div; + struct clk_init_data init; + struct clk_div_table *table; + struct clk_parent_data pdata = { .index = 0 }; + u32 max_div, min_div; + struct clk_hw *hw; + int ret; + int i; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + max_div = clk_div_mask(width) + 1; + min_div = 1; + + table = devm_kcalloc(dev, max_div + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < max_div; i++) { + table[i].val = min_div + i; + table[i].div = 2 * table[i].val; + } + table[max_div].val = 0; + table[max_div].div = 0; + + memset(&init, 0, sizeof(init)); + init.name = name; + init.ops = &ma35d1_adc_clkdiv_ops; + init.flags |= flags; + pdata.hw = parent_hw; + init.parent_data = &pdata; + init.num_parents = 1; + + div->reg = reg; + div->shift = shift; + div->width = width; + div->mask = mask_bit ? BIT(mask_bit) : 0; + div->lock = lock; + div->hw.init = &init; + div->table = table; + + hw = &div->hw; + ret = devm_clk_hw_register(dev, hw); + if (ret) + return ERR_PTR(ret); + return hw; +} +EXPORT_SYMBOL_GPL(ma35d1_reg_adc_clkdiv); diff --git a/drivers/clk/nuvoton/clk-ma35d1-pll.c b/drivers/clk/nuvoton/clk-ma35d1-pll.c new file mode 100644 index 000000000000..8ffefe285603 --- /dev/null +++ b/drivers/clk/nuvoton/clk-ma35d1-pll.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Nuvoton Technology Corp. + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx> + */ + +#include <linux/bitfield.h> +#include <linux/clk-provider.h> +#include <linux/container_of.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + +/* PLL frequency limits */ +#define PLL_FREF_MAX_FREQ 200000000UL +#define PLL_FREF_MIN_FREQ 1000000UL +#define PLL_FREF_M_MAX_FREQ 40000000UL +#define PLL_FREF_M_MIN_FREQ 10000000UL +#define PLL_FCLK_MAX_FREQ 2400000000UL +#define PLL_FCLK_MIN_FREQ 600000000UL +#define PLL_FCLKO_MAX_FREQ 2400000000UL +#define PLL_FCLKO_MIN_FREQ 85700000ULIf there are in Hz, there would be something in include/linux/units.h to reduce the number of zeros here.
Okay, I will fix it.
+#define PLL_SS_RATE 0x77 +#define PLL_SLOPE 0x58CFA + +#define REG_PLL_CTL0_OFFSET 0x0 +#define REG_PLL_CTL1_OFFSET 0x4 +#define REG_PLL_CTL2_OFFSET 0x8 + +/* bit fields for REG_CLK_PLL0CTL0, which is SMIC PLL design */ +#define SPLL0_CTL0_FBDIV GENMASK(7, 0) +#define SPLL0_CTL0_INDIV GENMASK(11, 8) +#define SPLL0_CTL0_OUTDIV GENMASK(13, 12) +#define SPLL0_CTL0_PD BIT(16) +#define SPLL0_CTL0_BP BIT(17) + +/* bit fields for REG_CLK_PLLxCTL0 ~ REG_CLK_PLLxCTL2, where x = 2 ~ 5 */ +#define PLL_CTL0_FBDIV GENMASK(10, 0) +#define PLL_CTL0_INDIV GENMASK(17, 12) +#define PLL_CTL0_MODE GENMASK(19, 18) +#define PLL_CTL0_SSRATE GENMASK(30, 20) +#define PLL_CTL1_PD BIT(0) +#define PLL_CTL1_BP BIT(1) +#define PLL_CTL1_OUTDIV GENMASK(6, 4) +#define PLL_CTL1_FRAC GENMASK(31, 24) +#define PLL_CTL2_SLOPE GENMASK(23, 0) + +#define INDIV_MIN 1 +#define INDIV_MAX 63 +#define FBDIV_MIN 16 +#define FBDIV_MAX 2047 +#define FBDIV_FRAC_MIN 1600 +#define FBDIV_FRAC_MAX 204700 +#define OUTDIV_MIN 1 +#define OUTDIV_MAX 7 + +#define PLL_MODE_INT 0 +#define PLL_MODE_FRAC 1 +#define PLL_MODE_SS 2 + +struct ma35d1_clk_pll { + struct clk_hw hw; + u32 id; + u8 mode; + void __iomem *ctl0_base; + void __iomem *ctl1_base; + void __iomem *ctl2_base; +}; + +struct clk_hw *ma35d1_reg_clk_pll(struct device *dev, u32 id, u8 u8mode, const char *name, + struct clk_hw *parent_hw, void __iomem *base); + +static inline struct ma35d1_clk_pll *to_ma35d1_clk_pll(struct clk_hw *_hw) +{ + return container_of(_hw, struct ma35d1_clk_pll, hw); +} + +static unsigned long ma35d1_calc_smic_pll_freq(u32 pll0_ctl0, + unsigned long parent_rate) +{ + u32 m, n, p, outdiv; + u64 pll_freq; + const u32 clk_div_table[] = { 1, 2, 4, 8 }; + + if (pll0_ctl0 & SPLL0_CTL0_BP) + return parent_rate; + + n = FIELD_GET(SPLL0_CTL0_FBDIV, pll0_ctl0); + m = FIELD_GET(SPLL0_CTL0_INDIV, pll0_ctl0); + p = FIELD_GET(SPLL0_CTL0_OUTDIV, pll0_ctl0); + outdiv = clk_div_table[p]; + pll_freq = (u64)parent_rate * n; + do_div(pll_freq, m * outdiv); + return pll_freq; +} + +static unsigned long ma35d1_calc_pll_freq(u8 mode, u32 *reg_ctl, + unsigned long parent_rate) +{ + u32 m, n, p; + u64 pll_freq, x; + + if (reg_ctl[1] & PLL_CTL1_BP) + return parent_rate; + + n = FIELD_GET(PLL_CTL0_FBDIV, reg_ctl[0]); + m = FIELD_GET(PLL_CTL0_INDIV, reg_ctl[0]); + p = FIELD_GET(PLL_CTL1_OUTDIV, reg_ctl[1]); + + if (mode == PLL_MODE_INT) { + pll_freq = (u64)parent_rate * n; + do_div(pll_freq, m * p); + } else { + x = FIELD_GET(PLL_CTL1_FRAC, reg_ctl[1]); + /* 2 decimal places floating to integer (ex. 1.23 to 123) */ + n = n * 100 + ((x * 100) / FIELD_MAX(PLL_CTL1_FRAC)); + pll_freq = ((u64)parent_rate * n) / 100 / m / p;Don't rely on compiler, you need to use correct fuction to do any 64-bit divide. Also, you probably want to do just one divide.
I will fix it.
+ } + return pll_freq; +} + +static int ma35d1_pll_find_closest(struct ma35d1_clk_pll *pll, unsigned long rate, + unsigned long parent_rate, u32 *reg_ctl, + unsigned long *freq) +{ + int p, m, n; + int fbdiv_min, fbdiv_max; + unsigned long diff = 0xffffffff;I'm just noting that this is not the maximum value of unsigned long with 64-bit longs. It is probably correct as is (32-bit limiter) but please double check it does what you intended.
Here we just want to provide diff with an initial value for comparison, which is
already far beyond the reasonable range, so it should be sufficient.
+ + *freq = 0; + if (rate < PLL_FCLKO_MIN_FREQ || rate > PLL_FCLKO_MAX_FREQ) + return -EINVAL; + + if (pll->mode == PLL_MODE_INT) { + fbdiv_min = FBDIV_MIN; + fbdiv_max = FBDIV_MAX; + } else { + fbdiv_min = FBDIV_FRAC_MIN; + fbdiv_max = FBDIV_FRAC_MAX; + } + + for (m = INDIV_MIN; m <= INDIV_MAX; m++) { + for (n = fbdiv_min; n <= fbdiv_max; n++) { + for (p = OUTDIV_MIN; p <= OUTDIV_MAX; p++) { + unsigned long tmp, fout; + u64 fclk; + + tmp = parent_rate / m;64-bit divide shouldn't be left to compiler, use a 64-bit helper function.
Okay, I will use helper functions instead.
+ if (tmp < PLL_FREF_M_MIN_FREQ || + tmp > PLL_FREF_M_MAX_FREQ) + continue; /* constrain */ + + fclk = (u64)parent_rate * n / m;Ditto.+ /* for 2 decimal places */ + if (pll->mode != PLL_MODE_INT) + fclk /= 100;Ditto.+ + if (fclk < PLL_FCLK_MIN_FREQ || + fclk > PLL_FCLK_MAX_FREQ) + continue; /* constrain */ + + fout = (unsigned long)(fclk / p); + if (fout < PLL_FCLKO_MIN_FREQ || + fout > PLL_FCLKO_MAX_FREQ) + continue; /* constrain */ + + if (abs(rate - fout) < diff) {diff = abs(rate - fout); if (diff < min_diff) {
+ reg_ctl[0] = FIELD_PREP(PLL_CTL0_INDIV, m) | + FIELD_PREP(PLL_CTL0_FBDIV, n); + reg_ctl[1] = FIELD_PREP(PLL_CTL1_OUTDIV, p); + *freq = fout; + diff = abs(rate - fout); + if (diff == 0)min_diff = diff; if (min_diff == 0) You need to add the min_diff variable. Perhaps move diff variable local to this block.
Sure, I will add a min_diff variable to make the code more readable.
+ break; + } + } + } + } + if (*freq == 0) + return -EINVAL; /* cannot find even one valid setting */ + return 0; +} + +static int ma35d1_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 reg_ctl[3] = { 0 }; + unsigned long pll_freq; + int ret; + + if (parent_rate < PLL_FREF_MIN_FREQ || + parent_rate > PLL_FREF_MAX_FREQ) + return -EINVAL; + + ret = ma35d1_pll_find_closest(pll, rate, parent_rate, reg_ctl, &pll_freq); + if (ret != 0) + return ret; + + switch (pll->mode) { + case PLL_MODE_INT: + reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_INT); + break; + case PLL_MODE_FRAC: + reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_FRAC); + break; + case PLL_MODE_SS: + reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_SS) | + FIELD_PREP(PLL_CTL0_SSRATE, PLL_SS_RATE); + reg_ctl[2] = FIELD_PREP(PLL_CTL2_SLOPE, PLL_SLOPE); + break; + } + reg_ctl[1] |= PLL_CTL1_PD; + + writel_relaxed(reg_ctl[0], pll->ctl0_base); + writel_relaxed(reg_ctl[1], pll->ctl1_base); + writel_relaxed(reg_ctl[2], pll->ctl2_base); + return 0; +} + +static unsigned long ma35d1_clk_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 reg_ctl[3]; + unsigned long pll_freq; + + if (parent_rate < PLL_FREF_MIN_FREQ || parent_rate > PLL_FREF_MAX_FREQ) + return 0; + + switch (pll->id) { + case CAPLL: + reg_ctl[0] = readl_relaxed(pll->ctl0_base); + pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], parent_rate); + return pll_freq; + case DDRPLL: + case APLL: + case EPLL: + case VPLL: + reg_ctl[0] = readl_relaxed(pll->ctl0_base); + reg_ctl[1] = readl_relaxed(pll->ctl1_base); + pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, parent_rate); + return pll_freq; + } + return 0; +} + +static long ma35d1_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 reg_ctl[3] = { 0 }; + unsigned long pll_freq; + long ret; + + if (*parent_rate < PLL_FREF_MIN_FREQ || *parent_rate > PLL_FREF_MAX_FREQ) + return -EINVAL; + + ret = ma35d1_pll_find_closest(pll, rate, *parent_rate, reg_ctl, &pll_freq); + if (ret != 0) + return ret; + + switch (pll->id) { + case CAPLL: + reg_ctl[0] = readl_relaxed(pll->ctl0_base); + pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], *parent_rate); + return pll_freq; + case DDRPLL: + case APLL: + case EPLL: + case VPLL: + reg_ctl[0] = readl_relaxed(pll->ctl0_base); + reg_ctl[1] = readl_relaxed(pll->ctl1_base); + pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, *parent_rate); + return pll_freq; + } + return 0; +} + +static int ma35d1_clk_pll_is_prepared(struct clk_hw *hw) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 val = readl_relaxed(pll->ctl1_base); + + return val & PLL_CTL1_PD ? 0 : 1;return !(val & PLL_CTL1_PD);
I will fix it.
+} + +static int ma35d1_clk_pll_prepare(struct clk_hw *hw) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 val; + + val = readl_relaxed(pll->ctl1_base); + val &= ~PLL_CTL1_PD; + writel_relaxed(val, pll->ctl1_base); + return 0; +} + +static void ma35d1_clk_pll_unprepare(struct clk_hw *hw) +{ + struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw); + u32 val; + + val = readl_relaxed(pll->ctl1_base); + val |= PLL_CTL1_PD; + writel_relaxed(val, pll->ctl1_base); +} + +static const struct clk_ops ma35d1_clk_pll_ops = { + .is_prepared = ma35d1_clk_pll_is_prepared, + .prepare = ma35d1_clk_pll_prepare, + .unprepare = ma35d1_clk_pll_unprepare, + .set_rate = ma35d1_clk_pll_set_rate, + .recalc_rate = ma35d1_clk_pll_recalc_rate, + .round_rate = ma35d1_clk_pll_round_rate, +}; + +static const struct clk_ops ma35d1_clk_fixed_pll_ops = { + .recalc_rate = ma35d1_clk_pll_recalc_rate, + .round_rate = ma35d1_clk_pll_round_rate, +}; + +struct clk_hw *ma35d1_reg_clk_pll(struct device *dev, u32 id, u8 u8mode, const char *name, + struct clk_hw *parent_hw, void __iomem *base) +{ + struct ma35d1_clk_pll *pll; + struct clk_parent_data pdata = { .index = 0 }; + struct clk_hw *hw; + struct clk_init_data init; + int ret; + + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + pll->id = id; + pll->mode = u8mode; + pll->ctl0_base = base + REG_PLL_CTL0_OFFSET; + pll->ctl1_base = base + REG_PLL_CTL1_OFFSET; + pll->ctl2_base = base + REG_PLL_CTL2_OFFSET; + + memset(&init, 0, sizeof(init));Add = {} to the declaration instead to get it initialized.
Okay, I will fix it.
+ init.name = name; + init.flags = 0; + pdata.hw = parent_hw; + init.parent_data = &pdata; + init.num_parents = 1; + + if (id == CAPLL || id == DDRPLL) + init.ops = &ma35d1_clk_fixed_pll_ops; + else + init.ops = &ma35d1_clk_pll_ops; + + pll->hw.init = &init; + hw = &pll->hw; + + ret = devm_clk_hw_register(dev, hw); + if (ret) + return ERR_PTR(ret); + return hw; +} +EXPORT_SYMBOL_GPL(ma35d1_reg_clk_pll); +static int ma35d1_clocks_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *clk_node = pdev->dev.of_node; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + void __iomem *clk_base; + static struct clk_hw **hws; + static struct clk_hw_onecell_data *ma35d1_hw_data; + u32 pllmode[PLL_MAX_NUM]; + int ret; + + ma35d1_hw_data = devm_kzalloc(dev, struct_size(ma35d1_hw_data, + hws, CLK_MAX_IDX), GFP_KERNEL);Not a good split of lines here, struct_size() shouldn't be split like that wrt. alignment.
I will make it in one line.
+ if (WARN_ON(!ma35d1_hw_data)) + return -ENOMEM; + + ma35d1_hw_data->num = CLK_MAX_IDX; + hws = ma35d1_hw_data->hws; + + clk_base = devm_ioremap_resource(dev, res); + if (IS_ERR(clk_base)) + return PTR_ERR(clk_base); + + ret = ma35d1_get_pll_setting(clk_node, pllmode); + if (ret < 0) { + dev_err(dev, "Invalid PLL setting!\n"); + return -EINVAL; + } +[...snip...] Somewhere in the middle, I realized this patch must have been the unreadable mess one I reviewed earlier. ...It sure has come long way from that, it's so much easier to read now. Great work so far.
Thank you for your kind help. Best Regards, Jacky Huang
