Dear Stephen,
Thanks for your advice.
On 2023/3/29 上午 02:18, Stephen Boyd wrote:
Quoting Jacky Huang (2023-03-27 19:19:09)
diff --git a/drivers/clk/nuvoton/Kconfig b/drivers/clk/nuvoton/Kconfig
new file mode 100644
index 000000000000..c1324efedcb9
--- /dev/null
+++ b/drivers/clk/nuvoton/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+# common clock support for Nuvoton SoC family.
+
+config COMMON_CLK_NUVOTON
+ bool "Nuvoton clock controller common support"
+ depends on ARCH_NUVOTON
Add || COMPILE_TEST
+ default ARCH_NUVOTON
+ help
+ Say y here to enable common clock controller for Nuvoton platforms.
+
+if COMMON_CLK_NUVOTON
Add a newline here.
+config CLK_MA35D1
+ bool "Nuvoton MA35D1 clock controller support"
+ depends on ARM64 || COMPILE_TEST
Drop this
+ default y
And this.
+ help
+ Build the driver for MA35D1 Clock Driver.
This says driver twice. "Build the clk driver for MA35D1 SoCs"?
I will fix all above of Kconfig file. Thank you.
+
+endif
diff --git a/drivers/clk/nuvoton/clk-ma35d1-divider.c b/drivers/clk/nuvoton/clk-ma35d1-divider.c
new file mode 100644
index 000000000000..340a889a1417
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-ma35d1-divider.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include "clk-ma35d1.h"
+
+#define clk_div_mask(width) ((1 << (width)) - 1)
clk-provider.h defines this already, use that?
Yes, I will remove this.
+
+struct ma35d1_adc_clk_div {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u32 mask;
+ const struct clk_div_table *table;
+ /* protects concurrent access to clock divider registers */
+ spinlock_t *lock;
+};
+
+static inline struct ma35d1_adc_clk_div *to_ma35d1_adc_clk_div(struct clk_hw *_hw)
+{
+ return container_of(_hw, struct ma35d1_adc_clk_div, hw);
+}
+
+static inline unsigned long ma35d1_clkdiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned int val;
+ struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+ val = readl_relaxed(dclk->reg) >> dclk->shift;
+ val &= clk_div_mask(dclk->width);
+ val += 1;
+ return divider_recalc_rate(hw, parent_rate, val, dclk->table,
+ CLK_DIVIDER_ROUND_CLOSEST, dclk->width);
+}
+
+static inline long ma35d1_clkdiv_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+ return divider_round_rate(hw, rate, prate, dclk->table,
+ dclk->width, CLK_DIVIDER_ROUND_CLOSEST);
+}
+
+static inline int ma35d1_clkdiv_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ int value;
+ unsigned long flags = 0;
+ u32 data;
+ struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+ value = divider_get_val(rate, parent_rate, dclk->table,
+ dclk->width, CLK_DIVIDER_ROUND_CLOSEST);
+
+ if (dclk->lock)
+ spin_lock_irqsave(dclk->lock, flags);
Can you just always lock? That makes the conditional locking go away.
OK, I will remove the "if (dclk->lock)" check.
+
+ data = readl_relaxed(dclk->reg);
+ data &= ~(clk_div_mask(dclk->width) << dclk->shift);
+ data |= (value - 1) << dclk->shift;
+ data |= dclk->mask;
+
+ writel_relaxed(data, dclk->reg);
+
+ if (dclk->lock)
+ spin_unlock_irqrestore(dclk->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops ma35d1_adc_clkdiv_ops = {
+ .recalc_rate = ma35d1_clkdiv_recalc_rate,
+ .round_rate = ma35d1_clkdiv_round_rate,
+ .set_rate = ma35d1_clkdiv_set_rate,
+};
+
+struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name,
+ const char *parent_name,
+ spinlock_t *lock,
+ unsigned long flags, void __iomem *reg,
+ u8 shift, u8 width, u32 mask_bit)
+{
+ struct ma35d1_adc_clk_div *div;
+ struct clk_init_data init;
+ struct clk_div_table *table;
+ u32 max_div, min_div;
+ struct clk_hw *hw;
+ int ret;
+ int i;
+
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ max_div = clk_div_mask(width) + 1;
+ min_div = 1;
+
+ table = devm_kcalloc(dev, max_div + 1, sizeof(*table), GFP_KERNEL);
+ if (!table)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < max_div; i++) {
+ table[i].val = (min_div + i);
Drop useless parenthesis.
I will fix it.
+ table[i].div = 2 * table[i].val;
+ }
+ table[max_div].val = 0;
+ table[max_div].div = 0;
+
+ init.name = name;
+ init.ops = &ma35d1_adc_clkdiv_ops;
+ init.flags |= flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ div->reg = reg;
+ div->shift = shift;
+ div->width = width;
+ div->mask = mask_bit ? BIT(mask_bit) : 0;
+ div->lock = lock;
+ div->hw.init = &init;
+ div->table = table;
+
+ hw = &div->hw;
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret < 0)
Use if (ret) instead.
I will fix it.
+ return ERR_PTR(ret);
+ return hw;
+}
diff --git a/drivers/clk/nuvoton/clk-ma35d1-pll.c b/drivers/clk/nuvoton/clk-ma35d1-pll.c
new file mode 100644
index 000000000000..b36fbda4fa0a
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-ma35d1-pll.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "clk-ma35d1.h"
+
+#define REG_SYS_RLKTZNS 0x1a4 /* Register Lock Control */
+
+struct ma35d1_clk_pll {
+ struct clk_hw hw;
+ u8 type;
+ u8 mode;
+ unsigned long rate;
+ void __iomem *ctl0_base;
This needs an include for __iomem define. Just include kernel.h for now.
OK, I will add it.
+ void __iomem *ctl1_base;
+ void __iomem *ctl2_base;
+ struct regmap *regmap;
+};
+
+static inline struct ma35d1_clk_pll *to_ma35d1_clk_pll(struct clk_hw *_hw)
+{
+ return container_of(_hw, struct ma35d1_clk_pll, hw);
Missing include as well.
I will add the
#include <linux/container_of.h>
+}
+
+static void ma35d1_unlock_regs(struct ma35d1_clk_pll *pll)
+{
+ int ret;
+
+ do {
+ regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x59);
+ regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x16);
+ regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x88);
+ regmap_read(pll->regmap, REG_SYS_RLKTZNS, &ret);
+ } while (ret == 0);
Any sort of timeout?
As we have discussed in [PATCH v6 08/12] of this patchset, we will
remove the register lock.
So, this function will be removed in the next version.
+}
+
+static void ma35d1_lock_regs(struct ma35d1_clk_pll *pll)
+{
+ regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x0);
+}
+
+static unsigned long ma35d1_calc_smic_pll_freq(u32 pll0_ctl0,
+ unsigned long parent_rate)
+{
+ u32 m, n, p, outdiv;
+ u64 pll_freq;
+ u32 clk_div_table[] = { 1, 2, 4, 8 };
const
OK, I will add const to the clk_div_table[].
+
+ if (pll0_ctl0 & SPLL0_CTL0_BP)
+ return parent_rate;
+
+ n = FIELD_GET(SPLL0_CTL0_FBDIV, pll0_ctl0);
+ m = FIELD_GET(SPLL0_CTL0_INDIV, pll0_ctl0);
+ p = FIELD_GET(SPLL0_CTL0_OUTDIV, pll0_ctl0);
+ outdiv = clk_div_table[p];
+ pll_freq = (u64)parent_rate * n;
+ do_div(pll_freq, m * outdiv);
+ return (unsigned long)pll_freq;
Remove useless cast.
I will fix it.
+}
+
+static unsigned long ma35d1_calc_pll_freq(u8 mode, u32 *reg_ctl,
+ unsigned long parent_rate)
+{
+ u32 m, n, p;
+ u64 pll_freq, x;
+
+ if (reg_ctl[1] & PLL_CTL1_BP)
+ return parent_rate;
+
+ if (mode == PLL_MODE_INT) {
+ n = FIELD_GET(PLL_CTL0_FBDIV, reg_ctl[0]);
+ m = FIELD_GET(PLL_CTL0_INDIV, reg_ctl[0]);
+ p = FIELD_GET(PLL_CTL1_OUTDIV, reg_ctl[1]);
+ pll_freq = (u64)parent_rate * n;
+ do_div(pll_freq, m * p);
+ } else {
+ n = FIELD_GET(PLL_CTL0_FBDIV, reg_ctl[0]);
+ m = FIELD_GET(PLL_CTL0_INDIV, reg_ctl[0]);
+ p = FIELD_GET(PLL_CTL1_OUTDIV, reg_ctl[1]);
The n, m, p are the same, so pull them out of the if-else to deduplicate.
Ok, I will modify it.
+ x = FIELD_GET(PLL_CTL1_FRAC, reg_ctl[1]);
+ /* 2 decimal places floating to integer (ex. 1.23 to 123) */
+ n = n * 100 + ((x * 100) / FIELD_MAX(PLL_CTL1_FRAC));
Is this mult_frac()?
Not exactly. The number is represented as n.x.
Suppose the number is 123.45, then n is 123 and x is 45.
We have it be multiplied with 100 to be integer 12345, which is n.
In the following
pll_freq = ((u64)parent_rate * n) / 100 / m / p;
We can keep precision of n.
It seems not applicable to mult_frac().
+ pll_freq = ((u64)parent_rate * n) / 100 / m / p;
+ }
Add a newline
+ return (unsigned long)pll_freq;
Remove useless cast.
I will fix them.
+}
+
+static int ma35d1_pll_find_closest(struct ma35d1_clk_pll *pll,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u32 *reg_ctl, unsigned long *freq)
+{
+ int p, m, n;
+ int fbdiv_min, fbdiv_max;
+ unsigned long diff = 0xffffffff;
+
+ *freq = 0;
+ if ((rate < PLL_FCLKO_MIN_FREQ) || (rate > PLL_FCLKO_MAX_FREQ))
+ return -EINVAL;
+
+ if (pll->mode == PLL_MODE_INT) {
+ fbdiv_min = FBDIV_MIN;
+ fbdiv_max = FBDIV_MAX;
+ } else {
+ fbdiv_min = FBDIV_FRAC_MIN;
+ fbdiv_max = FBDIV_FRAC_MAX;
+ }
+
+ for (m = INDIV_MIN; m <= INDIV_MAX; m++) {
+ for (n = fbdiv_min; n <= fbdiv_max; n++) {
+ for (p = OUTDIV_MIN; p <= OUTDIV_MAX; p++) {
+ unsigned long tmp, fout;
+ u64 fclk;
+
+ tmp = parent_rate / m;
+ if (tmp < PLL_FREF_M_MIN_FREQ ||
+ tmp > PLL_FREF_M_MAX_FREQ)
+ continue; /* constrain */
+
+ fclk = (u64)parent_rate * n / m;
+ /* for 2 decimal places */
+ if (pll->mode != PLL_MODE_INT)
+ fclk /= 100;
+
+ if (fclk < PLL_FCLK_MIN_FREQ ||
+ fclk > PLL_FCLK_MAX_FREQ)
+ continue; /* constrain */
+
+ fout = (unsigned long)(fclk / p);
+ if (fout < PLL_FCLKO_MIN_FREQ ||
+ fout > PLL_FCLKO_MAX_FREQ)
+ continue; /* constrain */
+
+ if (abs(rate - fout) < diff) {
+ reg_ctl[0] = FIELD_PREP(PLL_CTL0_INDIV, m) |
+ FIELD_PREP(PLL_CTL0_FBDIV, n);
+ reg_ctl[1] = FIELD_PREP(PLL_CTL1_OUTDIV, p);
+ *freq = fout;
+ diff = abs(rate - fout);
+ if (diff == 0)
+ break;
+ }
+ }
+ }
+ }
+ if (*freq == 0)
+ return -EINVAL; /* cannot find even one valid setting */
+ return 0;
+}
+
+static int ma35d1_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 reg_ctl[3] = { 0 };
+ unsigned long pll_freq;
+ int ret;
+
+ if ((parent_rate < PLL_FREF_MIN_FREQ) ||
+ (parent_rate > PLL_FREF_MAX_FREQ))
Remove useless parenthesis.
+ return -EINVAL;
+
+ if ((pll->type == MA35D1_CAPLL) || (pll->type == MA35D1_DDRPLL)) {
Remove useless parenthesis.
I will fix them.
+ pr_warn("Nuvoton MA35D1 CAPLL/DDRPLL is read only.\n");
+ return -EACCES;
+ }
+
+ ret = ma35d1_pll_find_closest(pll, rate, parent_rate, reg_ctl, &pll_freq);
+ if (ret != 0)
+ return ret;
+ pll->rate = pll_freq;
+
+ switch (pll->mode) {
+ case PLL_MODE_INT:
+ reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_INT);
+ break;
+ case PLL_MODE_FRAC:
+ reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_FRAC);
+ break;
+ case PLL_MODE_SS:
+ reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_SS) |
+ FIELD_PREP(PLL_CTL0_SSRATE, PLL_SS_RATE);
+ reg_ctl[2] = FIELD_PREP(PLL_CTL2_SLOPE, PLL_SLOPE);
+ break;
+ }
+ reg_ctl[1] |= PLL_CTL1_PD;
+
+ ma35d1_unlock_regs(pll);
+ writel_relaxed(reg_ctl[0], pll->ctl0_base);
+ writel_relaxed(reg_ctl[1], pll->ctl1_base);
+ writel_relaxed(reg_ctl[2], pll->ctl2_base);
+ ma35d1_lock_regs(pll);
+ return 0;
+}
+
+static unsigned long ma35d1_clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 reg_ctl[3];
+ unsigned long pll_freq;
+
+ if ((parent_rate < PLL_FREF_MIN_FREQ) || (parent_rate > PLL_FREF_MAX_FREQ))
Remove useless parenthesis.
I will fix it.
+ return 0;
+
+ switch (pll->type) {
+ case MA35D1_CAPLL:
+ reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+ pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], parent_rate);
return?
Yes, I will have it return here.
+ break;
+ case MA35D1_DDRPLL:
+ case MA35D1_APLL:
+ case MA35D1_EPLL:
+ case MA35D1_VPLL:
+ reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+ reg_ctl[1] = readl_relaxed(pll->ctl1_base);
+ pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, parent_rate);
return?
+ break;
+ }
+ return pll_freq;
return 0?
Yes, I will fix them.
+}
+
+static long ma35d1_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 reg_ctl[3] = { 0 };
+ unsigned long pll_freq;
+ long ret;
+
+ if (*parent_rate < PLL_FREF_MIN_FREQ || *parent_rate > PLL_FREF_MAX_FREQ)
+ return -EINVAL;
+
+ ret = ma35d1_pll_find_closest(pll, rate, *parent_rate, reg_ctl, &pll_freq);
+ if (ret != 0)
+ return ret;
+
+ switch (pll->type) {
+ case MA35D1_CAPLL:
+ reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+ pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], *parent_rate);
return?
+ break;
+ case MA35D1_DDRPLL:
+ case MA35D1_APLL:
+ case MA35D1_EPLL:
+ case MA35D1_VPLL:
+ reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+ reg_ctl[1] = readl_relaxed(pll->ctl1_base);
+ pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, *parent_rate);
return?
+ break;
+ }
+ return pll_freq;
return 0?
Yes, I will fix them.
+}
+
+static int ma35d1_clk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 val = readl_relaxed(pll->ctl1_base);
+
+ return val & PLL_CTL1_PD ? 0 : 1;
+}
+
+static int ma35d1_clk_pll_prepare(struct clk_hw *hw)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 val;
+
+ if ((pll->type == MA35D1_CAPLL) || (pll->type == MA35D1_DDRPLL)) {
Drop useless parenthesis.
I will fix it.
+ pr_warn("Nuvoton MA35D1 CAPLL/DDRPLL is read only.\n");
+ return -EACCES;
+ }
+
+ ma35d1_unlock_regs(pll);
+ val = readl_relaxed(pll->ctl1_base);
+ val &= ~PLL_CTL1_PD;
+ writel_relaxed(val, pll->ctl1_base);
+ ma35d1_lock_regs(pll);
+ return 0;
+}
+
+static void ma35d1_clk_pll_unprepare(struct clk_hw *hw)
+{
+ struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+ u32 val;
+
+ if ((pll->type == MA35D1_CAPLL) || (pll->type == MA35D1_DDRPLL)) {
Drop useless parenthesis.
I will fix it.
+ pr_warn("Nuvoton MA35D1 CAPLL/DDRPLL is read only.\n");
These read-only checks should be removed and different clk_ops should be
assigned for the read-only type of clks.
OK, I will fix it.
+ } else {
+ val = readl_relaxed(pll->ctl1_base);
+ val |= PLL_CTL1_PD;
+ writel_relaxed(val, pll->ctl1_base);
+ }
+}
+
+static const struct clk_ops ma35d1_clk_pll_ops = {
+ .is_prepared = ma35d1_clk_pll_is_prepared,
+ .prepare = ma35d1_clk_pll_prepare,
+ .unprepare = ma35d1_clk_pll_unprepare,
+ .set_rate = ma35d1_clk_pll_set_rate,
+ .recalc_rate = ma35d1_clk_pll_recalc_rate,
+ .round_rate = ma35d1_clk_pll_round_rate,
+};
+
+struct clk_hw *ma35d1_reg_clk_pll(enum ma35d1_pll_type type,
Pass a device here.
OK, I will add it.
+ u8 u8mode, const char *name,
+ const char *parent,
+ unsigned long targetFreq,
+ void __iomem *base,
+ struct regmap *regmap)
+{
+ struct ma35d1_clk_pll *pll;
+ struct clk_hw *hw;
+ struct clk_init_data init;
init = {};
+ int ret;
+
+ pll = kmalloc(sizeof(*pll), GFP_KERNEL);
Just use kzalloc(). This isn't a hot path.
I will use devm_kzalloc().
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->type = type;
+ pll->mode = u8mode;
+ pll->rate = targetFreq;
+ pll->ctl0_base = base + REG_PLL_CTL0_OFFSET;
+ pll->ctl1_base = base + REG_PLL_CTL1_OFFSET;
+ pll->ctl2_base = base + REG_PLL_CTL2_OFFSET;
+ pll->regmap = regmap;
+
+ init.name = name;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+ init.ops = &ma35d1_clk_pll_ops;
+ pll->hw.init = &init;
+ hw = &pll->hw;
+
+ ret = clk_hw_register(NULL, hw);
Use devm_
OK, I will fix it.
+ if (ret) {
+ pr_err("failed to register vsi-pll clock!!!\n");
I'm going to put a dev_err_probe() into clk registration code. Remove
this printk.
OK, I will remove it.
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+ return hw;
+}
diff --git a/drivers/clk/nuvoton/clk-ma35d1.c b/drivers/clk/nuvoton/clk-ma35d1.c
new file mode 100644
index 000000000000..e4d3ced396a3
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-ma35d1.c
@@ -0,0 +1,963 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+#include "clk-ma35d1.h"
+
+static DEFINE_SPINLOCK(ma35d1_lock);
+
+static const char *const ca35clk_sel_clks[] = {
Use clk_parent_data instead.
I will fix it.
+ "hxt", "capll", "ddrpll", "dummy"
+};
+
[...]
+
+static inline struct clk_hw *ma35d1_clk_fixed(const char *name, int rate)
+{
+ return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
+static inline struct clk_hw *ma35d1_clk_mux(const char *name,
+ void __iomem *reg,
+ u8 shift, u8 width,
+ const char *const *parents,
+ int num_parents)
+{
+ return clk_hw_register_mux(NULL, name, parents, num_parents,
+ CLK_SET_RATE_NO_REPARENT, reg, shift,
+ width, 0, &ma35d1_lock);
+}
+
+static inline struct clk_hw *ma35d1_clk_divider(const char *name,
+ const char *parent,
+ void __iomem *reg, u8 shift,
+ u8 width)
+{
+ return clk_hw_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0, &ma35d1_lock);
+}
+
+static inline struct clk_hw *ma35d1_clk_divider_pow2(const char *name,
+ const char *parent,
+ void __iomem *reg,
+ u8 shift, u8 width)
+{
+ return clk_hw_register_divider(NULL, name, parent,
+ CLK_DIVIDER_POWER_OF_TWO, reg, shift,
+ width, 0, &ma35d1_lock);
+}
+
+static inline struct clk_hw *ma35d1_clk_divider_table(const char *name,
+ const char *parent,
+ void __iomem *reg,
+ u8 shift, u8 width,
+ const struct clk_div_table *table)
+{
+ return clk_hw_register_divider_table(NULL, name, parent, 0,
+ reg, shift, width, 0, table,
+ &ma35d1_lock);
+}
+
+static inline struct clk_hw *ma35d1_clk_fixed_factor(const char *name,
+ const char *parent,
+ unsigned int mult,
+ unsigned int div)
+{
+ return clk_hw_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+static inline struct clk_hw *ma35d1_clk_gate(const char *name,
+ const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_hw_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, 0, &ma35d1_lock);
+}
These need to use devm_ to unregister on failure.
OK, I will fix them all.
+
+static int ma35d1_get_pll_setting(struct device_node *clk_node,
+ u32 *pllmode, u32 *pllfreq)
+{
+ const char *of_str;
+ int i;
+
+ for (i = 0; i < PLL_MAX_NUM; i++) {
+ if (of_property_read_string_index(clk_node, "nuvoton,pll-mode", i, &of_str))
+ return -EINVAL;
+ if (!strcmp(of_str, "integer"))
+ pllmode[i] = PLL_MODE_INT;
+ else if (!strcmp(of_str, "fractional"))
+ pllmode[i] = PLL_MODE_FRAC;
+ else if (!strcmp(of_str, "spread-spectrum"))
+ pllmode[i] = PLL_MODE_SS;
+ else
+ return -EINVAL;
+ }
+ return of_property_read_u32_array(clk_node, "assigned-clock-rates",
The clk framework looks at this property. Why is the driver looking at
it too?
We should not use "assigned-clock-rates", instead we should create a
vendor-specific property to describe the pll frequency array.
I will fix it in the next version.
+ pllfreq, PLL_MAX_NUM);
+}
+
Best regards,
Jacky Huang
