On Wed, Mar 29, 2023 at 10:42:35AM -0500, Brenda Streiff wrote:
> The National Instruments (NI) 16550 is a 16550-like UART with larger
> FIFOs and embedded RS-232/RS-485 transceiver control circuitry. This
> patch adds a driver that can operate this UART, which is used for
> onboard serial ports in several NI embedded controller designs.
People are still making new 8250-like variants with different ways of
controlling them these days? That's the design pattern that will not
die, or at least, it keeps getting a "value-add" :(
>
> Portions of this driver were originally written by Jaeden Amero and
> Karthik Manamcheri, with extensive cleanups and refactors since.
>
> Signed-off-by: Brenda Streiff <brenda.streiff@xxxxxx>
> Cc: Gratian Crisan <gratian.crisan@xxxxxx>
> Cc: Jason Smith <jason.smith@xxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/tty/serial/8250/8250_ni.c | 447 ++++++++++++++++++++++++++++++
> drivers/tty/serial/8250/Kconfig | 9 +
> drivers/tty/serial/8250/Makefile | 1 +
> 4 files changed, 464 insertions(+)
> create mode 100644 drivers/tty/serial/8250/8250_ni.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d8ebab595b2a..c5283a7385fa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14322,6 +14322,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
> F: drivers/mtd/nand/
> F: include/linux/mtd/*nand*.h
>
> +NATIONAL INSTRUMENTS SERIAL DRIVER
> +M: Brenda Streiff <brenda.streiff@xxxxxx>
> +L: linux-serial@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/serial/ni,ni16550.yaml
> +F: drivers/tty/serial/8250/8250_ni.c
> +
> NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
> M: Daniel Mack <zonque@xxxxxxxxx>
> L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
> diff --git a/drivers/tty/serial/8250/8250_ni.c b/drivers/tty/serial/8250/8250_ni.c
> new file mode 100644
> index 000000000000..8bd9768576a7
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_ni.c
> @@ -0,0 +1,447 @@
> +// SPDX-License-Identifier: GPL-2.0+
Do you really mean "+"? Sorry, I have to ask.
> +/*
> + * NI 16550 UART Driver
> + *
> + * The National Instruments (NI) 16550 is a UART that is compatible with the
> + * TL16C550C and OX16C950B register interfaces, but has additional functions
> + * for RS-485 transceiver control. This driver implements support for the
> + * additional functionality on top of the standard serial8250 core.
> + *
> + * Copyright 2012-2023 National Instruments Corporation
Um, 2012 and every year since then? You all have had an out-of-tree
driver for 11+ years that has been constantly updated every year?
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/property.h>
> +
> +#include "8250.h"
> +
> +/* Extra bits in UART_ACR */
> +#define NI16550_ACR_AUTO_DTR_EN BIT(4)
> +
> +/* TFS - TX FIFO Size */
> +#define NI16550_TFS_OFFSET 0x0C
> +/* RFS - RX FIFO Size */
> +#define NI16550_RFS_OFFSET 0x0D
> +
> +/* PMR - Port Mode Register */
> +#define NI16550_PMR_OFFSET 0x0E
> +/* PMR[1:0] - Port Capabilities */
> +#define NI16550_PMR_CAP_MASK 0x03
> +#define NI16550_PMR_NOT_IMPL 0x00 /* not implemented */
> +#define NI16550_PMR_CAP_RS232 0x01 /* RS-232 capable */
> +#define NI16550_PMR_CAP_RS485 0x02 /* RS-485 capable */
> +#define NI16550_PMR_CAP_DUAL 0x03 /* dual-port */
> +/* PMR[4] - Interface Mode */
> +#define NI16550_PMR_MODE_MASK 0x10
> +#define NI16550_PMR_MODE_RS232 0x00 /* currently 232 */
> +#define NI16550_PMR_MODE_RS485 0x10 /* currently 485 */
> +
> +/* PCR - Port Control Register */
> +#define NI16550_PCR_OFFSET 0x0F
> +#define NI16550_PCR_RS422 0x00
> +#define NI16550_PCR_ECHO_RS485 0x01
> +#define NI16550_PCR_DTR_RS485 0x02
> +#define NI16550_PCR_AUTO_RS485 0x03
> +#define NI16550_PCR_WIRE_MODE_MASK 0x03
> +#define NI16550_PCR_TXVR_ENABLE_BIT BIT(3)
> +#define NI16550_PCR_RS485_TERMINATION_BIT BIT(6)
> +
> +/* flags for ni16550_device_info */
> +#define NI_HAS_PMR BIT(0)
> +
> +struct ni16550_device_info {
> + unsigned int uartclk;
> + uint8_t prescaler;
Please use proper kernel types, u8.
> + unsigned int flags;
And that's a horrible packing, do you mean to have those offsets?
And why "unsigned int", don't you mean "u64" or "u32"?
> +};
> +
> +struct ni16550_data {
> + int line;
> +};
> +
> +static int ni16550_enable_transceivers(struct uart_port *port)
> +{
> + uint8_t pcr;
> +
> + pcr = port->serial_in(port, NI16550_PCR_OFFSET);
> + pcr |= NI16550_PCR_TXVR_ENABLE_BIT;
> + dev_dbg(port->dev, "enable transceivers: write pcr: 0x%02x\n", pcr);
> + port->serial_out(port, NI16550_PCR_OFFSET, pcr);
> +
> + return 0;
> +}
> +
> +static int ni16550_disable_transceivers(struct uart_port *port)
> +{
> + uint8_t pcr;
> +
> + pcr = port->serial_in(port, NI16550_PCR_OFFSET);
> + pcr &= ~NI16550_PCR_TXVR_ENABLE_BIT;
> + dev_dbg(port->dev, "disable transceivers: write pcr: 0x%02x\n", pcr);
> + port->serial_out(port, NI16550_PCR_OFFSET, pcr);
> +
> + return 0;
> +}
> +
> +static int ni16550_rs485_config(struct uart_port *port,
> + struct ktermios *termios,
> + struct serial_rs485 *rs485)
> +{
> + uint8_t pcr;
> + struct uart_8250_port *up = container_of(port, struct uart_8250_port,
> + port);
> +
> + /* "rs485" should be given to us non-NULL. */
> + if (WARN_ON(rs485 == NULL))
Can this ever happen? If not, don't check for it, otherwise you just
rebooted a machine that has panic-on-warn enabled :(
> + return -EINVAL;
Or better yet, handle the case and return the error, why the WARN_ON()?
> +
> + pcr = serial_in(up, NI16550_PCR_OFFSET);
> + pcr &= ~NI16550_PCR_WIRE_MODE_MASK;
> +
> + if (rs485->flags & SER_RS485_ENABLED) {
> + /* RS-485 */
> + dev_vdbg(port->dev, "2-wire Auto\n");
Why "dev_vdbg()"? Why not just "dev_dbg()"? When are you going to
rebuild this code to enable the "dev_vdbg()" lines?
> + pcr |= NI16550_PCR_AUTO_RS485;
> + up->acr |= NI16550_ACR_AUTO_DTR_EN;
> + } else {
> + /* RS-422 */
> + dev_vdbg(port->dev, "4-wire\n");
> + pcr |= NI16550_PCR_RS422;
> + up->acr &= ~NI16550_ACR_AUTO_DTR_EN;
> + }
> +
> + dev_dbg(port->dev, "config rs485: write pcr: 0x%02x, acr: %02x\n", pcr, up->acr);
> + serial_out(up, NI16550_PCR_OFFSET, pcr);
> + serial_icr_write(up, UART_ACR, up->acr);
> +
> + return 0;
> +}
> +
> +static bool is_pmr_rs232_mode(struct uart_8250_port *up)
> +{
> + uint8_t pmr = serial_in(up, NI16550_PMR_OFFSET);
Again, proper kernel types everywhere please "u8".
> +
> + /*
> + * If the PMR is not implemented, then by default NI UARTs are
> + * connected to RS-485 transceivers
> + */
> + if ((pmr & NI16550_PMR_CAP_MASK) == NI16550_PMR_NOT_IMPL)
> + return false;
> +
> + if ((pmr & NI16550_PMR_CAP_MASK) == NI16550_PMR_CAP_DUAL)
> + /*
> + * If the port is dual-mode capable, then read the mode bit
> + * to know the current mode
> + */
> + return ((pmr & NI16550_PMR_MODE_MASK)
> + == NI16550_PMR_MODE_RS232);
> + else
> + /*
> + * If it is not dual-mode capable, then decide based on the
> + * capability
> + */
> + return ((pmr & NI16550_PMR_CAP_MASK) == NI16550_PMR_CAP_RS232);
> +}
> +
> +static void ni16550_config_prescaler(struct uart_8250_port *up,
> + uint8_t prescaler)
> +{
> + /*
> + * Page in the Enhanced Mode Registers
> + * Sets EFR[4] for Enhanced Mode.
> + */
> + uint8_t lcr_value;
> + uint8_t efr_value;
> +
> + lcr_value = serial_in(up, UART_LCR);
> + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
> +
> + efr_value = serial_in(up, UART_EFR);
> + efr_value |= UART_EFR_ECB;
> +
> + serial_out(up, UART_EFR, efr_value);
> +
> + /* Page out the Enhanced Mode Registers */
> + serial_out(up, UART_LCR, lcr_value);
> +
> + /* Set prescaler to CPR register. */
> + serial_out(up, UART_SCR, UART_CPR);
> + serial_out(up, UART_ICR, prescaler);
> +}
> +
> +static const struct serial_rs485 ni16550_rs485_supported = {
> + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
> +};
> +
> +static void ni16550_rs485_setup(struct uart_port *port)
> +{
> + port->rs485_config = ni16550_rs485_config;
> + port->rs485_supported = ni16550_rs485_supported;
> + /*
> + * The hardware comes up by default in 2-wire auto mode and we
> + * set the flags to represent that
> + */
> + port->rs485.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND;
> +}
> +
> +static int ni16550_port_startup(struct uart_port *port)
> +{
> + int ret;
> +
> + ret = serial8250_do_startup(port);
> + if (ret)
> + return ret;
> +
> + return ni16550_enable_transceivers(port);
> +}
> +
> +static void ni16550_port_shutdown(struct uart_port *port)
> +{
> + ni16550_disable_transceivers(port);
> +
> + serial8250_do_shutdown(port);
> +}
> +
> +static int ni16550_get_regs(struct platform_device *pdev,
> + struct uart_port *port)
> +{
> + struct resource *regs;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (regs) {
> + port->iotype = UPIO_PORT;
> + port->iobase = regs->start;
> +
> + return 0;
> + }
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (regs) {
> + port->iotype = UPIO_MEM;
> + port->mapbase = regs->start;
> + port->mapsize = resource_size(regs);
> + port->flags |= UPF_IOREMAP;
> +
> + port->membase = devm_ioremap(&pdev->dev, port->mapbase,
> + port->mapsize);
> + if (!port->membase)
> + return -ENOMEM;
> +
> + return 0;
> + }
> +
> + dev_err(&pdev->dev, "no registers defined\n");
> + return -EINVAL;
> +}
> +
> +static int ni16550_read_fifo_size(struct uart_8250_port *uart, int reg)
Why not return "u8"?
> +{
> + /*
> + * Very old implementations don't have the TFS or RFS registers
> + * defined, so we may read all-0s or all-1s. For such devices,
> + * assume a FIFO size of 128.
> + */
> + int value = serial_in(uart, reg);
Again, u8?
> +
> + if (value == 0x00 || value == 0xFF)
> + return 128;
> +
> + return value;
> +}
> +
> +static void ni16550_set_mctrl(struct uart_port *port, unsigned int mctrl)
> +{
> + mctrl |= UART_MCR_CLKSEL;
> +
> + serial8250_do_set_mctrl(port, mctrl);
> +}
> +
> +static int ni16550_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct uart_8250_port uart = {};
> + struct ni16550_data *data;
> + const struct ni16550_device_info *info;
> + int ret = 0;
> + int irq;
> + int rs232_property = 0;
> + unsigned int prescaler;
> + const char *transceiver;
> + int txfifosz, rxfifosz;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + spin_lock_init(&uart.port.lock);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + ret = ni16550_get_regs(pdev, &uart.port);
> + if (ret < 0)
> + return ret;
> +
> + /* early setup so that serial_in()/serial_out() work */
> + serial8250_set_defaults(&uart);
> +
> + info = device_get_match_data(dev);
> +
> + uart.port.dev = dev;
> + uart.port.irq = irq;
> + uart.port.irqflags = IRQF_SHARED;
> + uart.port.flags |= UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
> + | UPF_FIXED_PORT | UPF_FIXED_TYPE;
> + uart.port.startup = ni16550_port_startup;
> + uart.port.shutdown = ni16550_port_shutdown;
> +
> + /*
> + * Hardware instantiation of FIFO sizes are held in registers.
> + */
> + txfifosz = ni16550_read_fifo_size(&uart, NI16550_TFS_OFFSET);
> + rxfifosz = ni16550_read_fifo_size(&uart, NI16550_RFS_OFFSET);
> +
> + dev_dbg(dev, "NI 16550 has TX FIFO size %d, RX FIFO size %d\n",
> + txfifosz, rxfifosz);
> +
> + uart.port.type = PORT_16550A;
> + uart.port.fifosize = txfifosz;
> + uart.tx_loadsz = txfifosz;
> + uart.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
> + uart.capabilities = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR;
> +
> + /*
> + * OF device-tree and NIC7A69 ACPI can declare clock-frequency,
> + * but may be missing for other instantiations, so this is optional.
> + * If present, override what we've defined in this driver.
> + */
> + if (info->uartclk)
> + uart.port.uartclk = info->uartclk;
> + device_property_read_u32(dev, "clock-frequency", &uart.port.uartclk);
> + if (!uart.port.uartclk) {
> + dev_err(dev, "unable to determine clock frequency!\n");
> + return -ENODEV;
> + }
> +
> + if (info->prescaler)
> + prescaler = info->prescaler;
> + device_property_read_u32(dev, "clock-prescaler", &prescaler);
> +
> + if (prescaler != 0) {
> + uart.port.set_mctrl = ni16550_set_mctrl;
> + ni16550_config_prescaler(&uart, (uint8_t)prescaler);
> + }
> +
> + /*
> + * The determination of whether or not this is an RS-485 or RS-232 port
> + * can come from the "transceiver" device property (if present), or it
> + * can come from the PMR (if it is present), and otherwise we're solely
> + * an RS-485 port.
> + */
> + if (!device_property_read_string(dev, "transceiver", &transceiver)) {
> + rs232_property = strncmp(transceiver, "RS-232", 6) == 0;
> +
> + dev_dbg(dev, "port is in %s mode (via device property)",
> + (rs232_property ? "RS-232" : "RS-485"));
> + } else if (info->flags & NI_HAS_PMR) {
> + rs232_property = is_pmr_rs232_mode(&uart);
> +
> + dev_dbg(dev, "port is in %s mode (via PMR)",
> + (rs232_property ? "RS-232" : "RS-485"));
> + } else {
> + rs232_property = 0;
> +
> + dev_dbg(dev, "port is fixed as RS-485");
> + }
> +
> + if (!rs232_property) {
> + /*
> + * Neither the 'transceiver' property nor the PMR indicate
> + * that this is an RS-232 port, so it must be an RS-485 one.
> + */
> + ni16550_rs485_setup(&uart.port);
> + }
> +
> + ret = serial8250_register_8250_port(&uart);
> + if (ret < 0)
> + return ret;
> +
> + data->line = ret;
> +
> + platform_set_drvdata(pdev, data);
> +
> + return 0;
> +}
> +
> +static int ni16550_remove(struct platform_device *pdev)
> +{
> + struct ni16550_data *data = platform_get_drvdata(pdev);
> +
> + serial8250_unregister_port(data->line);
> + return 0;
> +}
> +
> +static const struct ni16550_device_info ni16550_default = { };
> +
> +static const struct of_device_id ni16550_of_match[] = {
> + { .compatible = "ni,ni16550", .data = &ni16550_default },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, ni16550_of_match);
> +
> +/* NI 16550 RS-485 Interface */
> +static const struct ni16550_device_info nic7750 = {
> + .uartclk = 33333333,
> +};
> +
> +/* NI CVS-145x RS-485 Interface */
> +static const struct ni16550_device_info nic7772 = {
> + .uartclk = 1843200,
> + .flags = NI_HAS_PMR,
> +};
> +
> +/* NI cRIO-904x RS-485 Interface */
> +static const struct ni16550_device_info nic792b = {
> + /* Sets UART clock rate to 22.222 MHz with 1.125 prescale */
> + .uartclk = 25000000,
> + .prescaler = 0x09,
> +};
> +
> +/* NI sbRIO 96x8 RS-232/485 Interfaces */
> +static const struct ni16550_device_info nic7a69 = {
> + /* Set UART clock rate to 29.629 MHz with 1.125 prescale */
> + .uartclk = 29629629,
> + .prescaler = 0x09,
> +};
> +
> +static const struct acpi_device_id ni16550_acpi_match[] = {
> + { "NIC7750", (kernel_ulong_t)&nic7750 },
> + { "NIC7772", (kernel_ulong_t)&nic7772 },
> + { "NIC792B", (kernel_ulong_t)&nic792b },
> + { "NIC7A69", (kernel_ulong_t)&nic7a69 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, ni16550_acpi_match);
> +
> +static struct platform_driver ni16550_driver = {
> + .driver = {
> + .name = "ni16550",
> + .of_match_table = ni16550_of_match,
> + .acpi_match_table = ACPI_PTR(ni16550_acpi_match),
> + },
> + .probe = ni16550_probe,
> + .remove = ni16550_remove,
> +};
> +
> +module_platform_driver(ni16550_driver);
> +
> +MODULE_AUTHOR("Jaeden Amero <jaeden.amero@xxxxxx>");
> +MODULE_AUTHOR("Karthik Manamcheri <karthik.manamcheri@xxxxxx>");
> +MODULE_DESCRIPTION("NI 16550 Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
> index 5313aa31930f..c0f3aec51d13 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -565,6 +565,15 @@ config SERIAL_8250_BCM7271
> including DMA support and high accuracy BAUD rates, say
> Y to this option. If unsure, say N.
>
> +config SERIAL_8250_NI
> + tristate "NI 16550 based serial port"
> + depends on SERIAL_8250
> + help
> + This driver supports the integrated serial ports on National
> + Instruments (NI) controller hardware. This is required for all NI
> + controller models with onboard RS-485 or dual-mode RS-485/RS-232
> + ports.
Module name if built as a module?
thanks,
greg k-h
