On Fri, Mar 17, 2023 at 04:57:10PM -0400, Tom Rix wrote:
clang with W=1 reports
drivers/tty/serial/imx.c:292:19: error:
unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx21(struct imx_port *sport)
^
drivers/tty/serial/imx.c:297:19: error:
unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx53(struct imx_port *sport)
^
drivers/tty/serial/imx.c:302:19: error:
unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function]
static inline int imx_uart_is_imx6q(struct imx_port *sport)
^
These static functions are not used, so remove them.
Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
Funny, is_imx6q_uart() was introduced in
a496e6284c482555db8078190bb689594d129fa9 and never used. Since that
commit is_imx21_uart() also unused. And the imx53 variant was also never
used.
Looking at that a bit more, the following cleanup is also possible (only
compile tested):
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8308a23c55a7..a38ee0ed2210 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -178,8 +178,6 @@
enum imx_uart_type {
IMX1_UART,
IMX21_UART,
- IMX53_UART,
- IMX6Q_UART,
};
/* device type dependent stuff */
@@ -241,30 +239,21 @@ struct imx_port_ucrs {
unsigned int ucr3;
};
-static struct imx_uart_data imx_uart_devdata[] = {
- [IMX1_UART] = {
- .uts_reg = IMX1_UTS,
- .devtype = IMX1_UART,
- },
- [IMX21_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX21_UART,
- },
- [IMX53_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX53_UART,
- },
- [IMX6Q_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX6Q_UART,
- },
+static const struct imx_uart_data imx_uart_imx1_devdata = {
+ .uts_reg = IMX1_UTS,
+ .devtype = IMX1_UART,
+};
+
+static const struct imx_uart_data imx_uart_imx21_devdata = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX21_UART,
};
static const struct of_device_id imx_uart_dt_ids[] = {
- { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
- { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
- { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
- { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
+ { .compatible = "fsl,imx6q-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx53-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx1-uart", .data = &imx_uart_imx1_devdata, },
+ { .compatible = "fsl,imx21-uart", .data = &imx_uart_imx21_devdata, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
If you feel like squashing that into your commit or put it into a
separate commit with a nice commit log (after convincing yourself that
the change is fine), feel free to do so.
If you don't:
