[PATCH v11 3/4] dt-bindings: net: bluetooth: Add NXP bluetooth support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add binding document for NXP bluetooth chipsets attached over UART.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
v2: Resolved dt_binding_check errors. (Rob Herring)
v2: Modified description, added specific compatibility devices, corrected
indentations. (Krzysztof Kozlowski)
v3: Modified description, renamed file (Krzysztof Kozlowski)
v4: Resolved dt_binding_check errors, corrected indentation.
(Rob Herring, Krzysztof Kozlowski)
v5: Corrected serial device name in example. (Krzysztof Kozlowski)
v11: Corrected grammatical errors in description. (Paul Menzel)
---
 .../net/bluetooth/nxp,88w8987-bt.yaml         | 45 +++++++++++++++++++
 MAINTAINERS                                   |  6 +++
 2 files changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml

diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
new file mode 100644
index 000000000000..57e4c87cb00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Bluetooth chips
+
+description:
+  This binding describes UART-attached NXP bluetooth chips. These chips
+  are dual-radio chips supporting WiFi and Bluetooth. The bluetooth
+  works on standard H4 protocol over 4-wire UART. The RTS and CTS lines
+  are used during FW download. To enable power save mode, the host
+  asserts break signal over UART-TX line to put the chip into power save
+  state. De-asserting break wakes up the BT chip.
+
+maintainers:
+  - Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - nxp,88w8987-bt
+      - nxp,88w8997-bt
+
+  fw-init-baudrate:
+    description:
+      Chip baudrate after FW is downloaded and initialized.
+      This property depends on the module vendor's
+      configuration. If this property is not specified,
+      115200 is set as default.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        bluetooth {
+            compatible = "nxp,88w8987-bt";
+            fw-init-baudrate = <3000000>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 32dd41574930..030ec6fe89df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22835,6 +22835,12 @@ L:	linux-mm@xxxxxxxxx
 S:	Maintained
 F:	mm/zswap.c
 
+NXP BLUETOOTH WIRELESS DRIVERS
+M:	Amitkumar Karwar <amitkumar.karwar@xxxxxxx>
+M:	Neeraj Kale <neeraj.sanjaykale@xxxxxxx>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+
 THE REST
 M:	Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
 L:	linux-kernel@xxxxxxxxxxxxxxx
-- 
2.34.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux