Hi,
On Tue, Mar 7, 2023 at 8:43 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
>
> Make sure that there is data in the ring buffer before trying to set up
> a zero-length DMA transfer.
>
> This specifically fixes the following warning when unmapping the empty
> buffer on the sc8280xp-crd:
>
> WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8
> ...
> Call trace:
> iommu_dma_unmap_page+0xbc/0xd8
> dma_unmap_page_attrs+0x30/0x1c8
> geni_se_tx_dma_unprep+0x28/0x38
> qcom_geni_serial_isr+0x358/0x75c
>
> Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
> Cc: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
> drivers/tty/serial/qcom_geni_serial.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 2aa3872e6283..9871225b2f9b 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -631,6 +631,9 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
> if (port->tx_dma_addr)
> return;
>
> + if (uart_circ_empty(xmit))
> + return;
I guess you could remove the uart_circ_empty() test in
qcom_geni_serial_handle_tx_dma() now? In any case, with or without
that:
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
