Requesting an interrupt with IRQF_ONESHOT will run the primary handler in the hard-IRQ context even in the force-threaded mode. The force-threaded mode is used by PREEMPT_RT in order to avoid acquiring sleeping locks (spinlock_t) in hard-IRQ context. This combination makes it impossible and leads to "sleeping while atomic" warnings. Use one interrupt handler for both handlers (primary and secondary) and drop the IRQF_ONESHOT flag which is not needed. Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> Tested-by: Valentin Caron <valentin.caron@xxxxxxxxxxx> # V3 Signed-off-by: Marek Vasut <marex@xxxxxxx> --- Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> Cc: Erwan Le Ray <erwan.leray@xxxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Jiri Slaby <jirislaby@xxxxxxxxxx> Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: Valentin Caron <valentin.caron@xxxxxxxxxxx> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx To: linux-serial@xxxxxxxxxxxxxxx --- V2: - Update patch subject, was: serial: stm32: Move hard IRQ handling to threaded interrupt context - Use request_irq() instead, rename the IRQ handler function V3: - Update the commit message per suggestion from Sebastian - Add RB from Sebastian - Add Fixes tag V4: - Remove uart_console() deadlock check from stm32_usart_of_dma_rx_probe() - Use plain spin_lock()/spin_unlock() instead of the _irqsave/_irqrestore variants in IRQ handler - Add TB from Valentin --- drivers/tty/serial/stm32-usart.c | 33 +++++--------------------------- 1 file changed, 5 insertions(+), 28 deletions(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index a1490033aa164..50c9e011b723b 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -751,8 +751,8 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) struct tty_port *tport = &port->state->port; struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - u32 sr; unsigned int size; + u32 sr; sr = readl_relaxed(port->membase + ofs->isr); @@ -797,23 +797,9 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) spin_unlock(&port->lock); } - if (stm32_usart_rx_dma_enabled(port)) - return IRQ_WAKE_THREAD; - else - return IRQ_HANDLED; -} - -static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - struct tty_port *tport = &port->state->port; - struct stm32_port *stm32_port = to_stm32_port(port); - unsigned int size; - unsigned long flags; - /* Receiver timeout irq for DMA RX */ - if (!stm32_port->throttled) { - spin_lock_irqsave(&port->lock, flags); + if (stm32_usart_rx_dma_enabled(port) && !stm32_port->throttled) { + spin_lock(&port->lock); size = stm32_usart_receive_chars(port, false); uart_unlock_and_check_sysrq_irqrestore(port, flags); if (size) @@ -1015,10 +1001,8 @@ static int stm32_usart_startup(struct uart_port *port) u32 val; int ret; - ret = request_threaded_irq(port->irq, stm32_usart_interrupt, - stm32_usart_threaded_interrupt, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - name, port); + ret = request_irq(port->irq, stm32_usart_interrupt, + IRQF_NO_SUSPEND, name, port); if (ret) return ret; @@ -1601,13 +1585,6 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, struct dma_slave_config config; int ret; - /* - * Using DMA and threaded handler for the console could lead to - * deadlocks. - */ - if (uart_console(port)) - return -ENODEV; - stm32port->rx_buf = dma_alloc_coherent(dev, RX_BUF_L, &stm32port->rx_dma_buf, GFP_KERNEL); -- 2.39.0