The following changes since commit eb7081409f94a9a8608593d0fb63a1aa3d6f95d8:
Linux 6.1-rc6 (2022-11-20 16:02:16 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.2-rc1
for you to fetch changes up to 6373ab4dfee731deec62b4452ea641611feff9b3:
serial: atmel: don't stop the transmitter when doing PIO (2022-11-23 09:39:24 +0100)
----------------------------------------------------------------
TTY/Serial driver changes for 6.2-rc1
Here is the "big" set of tty/serial driver changes for 6.2-rc1.
As in previous kernel releases, nothing big here at all, just some small
incremental serial/tty layer cleanups and some individual driver
additions and fixes. Highlights are:
- serial helper macros from Jiri Slaby to reduce the amount of
duplicated code in serial drivers
- api cleanups and consolidations from Ilpo Järvinen in lots of serial
drivers
- the usual set of n_gsm fixes from Daniel Starke as that code gets
exercised more
- TIOCSTI is finally able to be disabled if requested (security
hardening feature from Kees Cook)
- fsl_lpuart driver fixes and features added
- other small serial driver additions and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Andy Shevchenko (2):
serial: 8250_core: Use str_enabled_disabled() helper
serdev: Replace poll loop by readx_poll_timeout() macro
Aniket Randive (1):
tty: serial: qcom-geni-serial: Add support for Hibernation feature
Christophe Leroy (1):
tty: evh_bytechan: Replace NO_IRQ by 0
Conor Dooley (2):
serial: sifive: select by default if SOC_SIFIVE
serial: sifive: select by default if SOC_CANAAN
Daniel Starke (3):
tty: n_gsm: introduce macro for minimal unit size
tty: n_gsm: add parameters used with parameter negotiation
tty: n_gsm: add parameter negotiation support
Gabriel Somlo (1):
serial: altera_uart: fix locking in polling mode
Geert Uytterhoeven (1):
dt-bindings: serial: renesas,scif: Document r8a779g0 support
Greg Kroah-Hartman (1):
Merge 6.1-rc6 into tty-next
Ilpo Järvinen (53):
serial: dz: Use uart_xmit_advance()
serial: men_z135_uart: Use uart_xmit_advance()
serial: msm: Use uart_xmit_advance()
serial: pch_uart: Use uart_xmit_advance()
serial: sc16is7xx: Use uart_xmit_advance()
serial: 8250_bcm7271: Use uart_xmit_advance()
serial: 8250: Use uart_xmit_advance()
serial: pl011: Use uart_xmit_advance()
serial: ar933x: Use uart_xmit_advance()
serial: arc: Use uart_xmit_advance()
serial: atmel: Use uart_xmit_advance()
serial: clps711x: Use uart_xmit_advance()
serial: cpm_uart: Use uart_xmit_advance()
serial: digicolor: Use uart_xmit_advance()
serial: linflexuart: Use uart_xmit_advance()
serial: fsl_lpuart: Use uart_xmit_advance()
serial: imx: Use uart_xmit_advance()
serial: ip22zilog: Use uart_xmit_advance()
serial: liteuart: Use uart_xmit_advance()
serial: max3100: Use uart_xmit_advance()
serial: max310x: Use uart_xmit_advance()
serial: meson: Use uart_xmit_advance()
serial: milbeaut_usio: Use uart_xmit_advance()
serial: mvebu-uart: Use uart_xmit_advance()
serial: pic32: Use uart_xmit_advance()
serial: pmac_zilog: Use uart_xmit_advance()
serial: rda: Use uart_xmit_advance()
serial: samsung_tty: Use uart_xmit_advance()
serial: sb1250-duart: Use uart_xmit_advance()
serial: sccnxp: Use uart_xmit_advance()
serial: tegra: Use uart_xmit_advance()
serial: sh-sci: Use uart_xmit_advance()
serial: sprd: Use uart_xmit_advance()
serial: stm32: Use uart_xmit_advance()
serial: sunhv: Use uart_xmit_advance()
serial: sunplus-uart: Use uart_xmit_advance()
serial: sunsab: Use uart_xmit_advance()
serial: sunsu: Use uart_xmit_advance()
serial: sunzilog: Use uart_xmit_advance()
serial: timbuart: Use uart_xmit_advance()
serial: uartlite: Use uart_xmit_advance()
serial: ucc_uart: Use uart_xmit_advance()
serial: xuartps: Use uart_xmit_advance()
serial: zs: Use uart_xmit_advance()
serial: Convert serial_rs485 to kernel doc
Documentation: rs485: Link reference properly
Documentation: rs485: Mention uart_get_rs485_mode()
Documentation: rs485: Fix struct referencing
Documentation: Make formatting consistent for rs485 docs
tty: Cleanup tty buffer align mask
tty: Convert tty_buffer flags to bool
serial: 8250_dma: Rearm DMA Rx if more data is pending
n_tty: Rename tail to old_tail in n_tty_read()
Jiamei Xie (1):
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Jiri Slaby (SUSE) (9):
tty: serial: introduce transmit helpers
tty: serial: use uart_port_tx() helper
tty: serial: use uart_port_tx_limited()
tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
tty: serial: altera_jtaguart: use uart_port::read_status_mask
tty: serial: altera_jtaguart: remove struct altera_jtaguart
serial: atmel: cleanup atmel_start+stop_tx()
serial: atmel: don't stop the transmitter when doing PIO
Jonathan Neuschäfer (1):
serial: Fix a typo ("ignorning")
Kartik (1):
serial: tegra: Read DMA status before terminating
Kees Cook (3):
tty: Move sysctl setup into "core" tty logic
tty: Allow TIOCSTI to be disabled
tty: Move TIOCSTI toggle variable before kerndoc
Lukas Wunner (2):
serial: 8250: 8250_omap: Support native RS485
serial: 8250: 8250_omap: Fix calculation of RS485 delays
Marek Vasut (1):
tty: serial: imx: Handle RS485 DE signal active high
Paul Fulghum (1):
tty: synclink_gt: unwind actions in error path of net device open
Rob Herring (1):
dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
Shaomin Deng (1):
tty: n_gsm: Delete unneeded semicolon
Sherry Sun (4):
tty: serial: fsl_lpuart: enable wakeup source for lpuart
tty: serial: fsl_lpuart: Add runtime pm support
tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
Siarhei Volkau (2):
dt-bindings: serial: ingenic: Add support for the JZ4750/55 SoCs
serial: 8250/ingenic: Add support for the JZ4750/JZ4755
Valentin Caron (1):
serial: stm32: move dma_request_chan() before clk_prepare_enable()
Xiongfeng Wang (1):
serial: pch: Fix PCI device refcount leak in pch_request_dma()
Yuan Can (2):
serial: 8250_bcm7271: Fix error handling in brcmuart_init()
serial: sunsab: Fix error handling in sunsab_init()
delisun (1):
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
ruanjinjie (1):
tty: hvc: make hvc_rtas_dev static
.../devicetree/bindings/serial/ingenic,uart.yaml | 4 +
.../devicetree/bindings/serial/renesas,scif.yaml | 1 +
.../bindings/serial/xlnx,opb-uartlite.yaml | 3 +-
Documentation/driver-api/serial/driver.rst | 3 +
Documentation/driver-api/serial/serial-rs485.rst | 56 +--
drivers/tty/Kconfig | 19 +
drivers/tty/ehv_bytechan.c | 4 +-
drivers/tty/hvc/hvc_rtas.c | 2 +-
drivers/tty/n_gsm.c | 402 +++++++++++++++++++--
drivers/tty/n_tty.c | 6 +-
drivers/tty/serial/21285.c | 32 +-
drivers/tty/serial/8250/8250_bcm7271.c | 14 +-
drivers/tty/serial/8250/8250_core.c | 5 +-
drivers/tty/serial/8250/8250_dma.c | 19 +-
drivers/tty/serial/8250/8250_ingenic.c | 32 +-
drivers/tty/serial/8250/8250_omap.c | 85 ++++-
drivers/tty/serial/8250/8250_port.c | 3 +-
drivers/tty/serial/Kconfig | 2 +
drivers/tty/serial/altera_jtaguart.c | 112 ++----
drivers/tty/serial/altera_uart.c | 34 +-
drivers/tty/serial/amba-pl010.c | 32 +-
drivers/tty/serial/amba-pl011.c | 17 +-
drivers/tty/serial/apbuart.c | 34 +-
drivers/tty/serial/ar933x_uart.c | 3 +-
drivers/tty/serial/arc_uart.c | 3 +-
drivers/tty/serial/atmel_serial.c | 80 ++--
drivers/tty/serial/bcm63xx_uart.c | 47 +--
drivers/tty/serial/clps711x.c | 3 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 3 +-
drivers/tty/serial/digicolor-usart.c | 3 +-
drivers/tty/serial/dz.c | 3 +-
drivers/tty/serial/fsl_linflexuart.c | 3 +-
drivers/tty/serial/fsl_lpuart.c | 386 ++++++++++++++------
drivers/tty/serial/imx.c | 71 +++-
drivers/tty/serial/ip22zilog.c | 6 +-
drivers/tty/serial/lantiq.c | 36 +-
drivers/tty/serial/liteuart.c | 3 +-
drivers/tty/serial/lpc32xx_hs.c | 33 +-
drivers/tty/serial/max3100.c | 4 +-
drivers/tty/serial/max310x.c | 5 +-
drivers/tty/serial/mcf.c | 34 +-
drivers/tty/serial/men_z135_uart.c | 5 +-
drivers/tty/serial/meson_uart.c | 3 +-
drivers/tty/serial/milbeaut_usio.c | 3 +-
drivers/tty/serial/mpc52xx_uart.c | 39 +-
drivers/tty/serial/mps2-uart.c | 26 +-
drivers/tty/serial/msm_serial.c | 13 +-
drivers/tty/serial/mux.c | 45 +--
drivers/tty/serial/mvebu-uart.c | 41 +--
drivers/tty/serial/mxs-auart.c | 32 +-
drivers/tty/serial/omap-serial.c | 32 +-
drivers/tty/serial/owl-uart.c | 32 +-
drivers/tty/serial/pch_uart.c | 16 +-
drivers/tty/serial/pic32_uart.c | 3 +-
drivers/tty/serial/pmac_zilog.c | 6 +-
drivers/tty/serial/pxa.c | 33 +-
drivers/tty/serial/qcom_geni_serial.c | 35 ++
drivers/tty/serial/rda-uart.c | 3 +-
drivers/tty/serial/rp2.c | 31 +-
drivers/tty/serial/sa1100.c | 34 +-
drivers/tty/serial/samsung_tty.c | 10 +-
drivers/tty/serial/sb1250-duart.c | 3 +-
drivers/tty/serial/sc16is7xx.c | 5 +-
drivers/tty/serial/sccnxp.c | 3 +-
drivers/tty/serial/serial-tegra.c | 9 +-
drivers/tty/serial/serial_txx9.c | 32 +-
drivers/tty/serial/sh-sci.c | 5 +-
drivers/tty/serial/sifive.c | 31 +-
drivers/tty/serial/sprd_serial.c | 40 +-
drivers/tty/serial/st-asc.c | 48 +--
drivers/tty/serial/stm32-usart.c | 54 ++-
drivers/tty/serial/sunhv.c | 6 +-
drivers/tty/serial/sunplus-uart.c | 4 +-
drivers/tty/serial/sunsab.c | 14 +-
drivers/tty/serial/sunsu.c | 3 +-
drivers/tty/serial/sunzilog.c | 6 +-
drivers/tty/serial/timbuart.c | 3 +-
drivers/tty/serial/uartlite.c | 3 +-
drivers/tty/serial/ucc_uart.c | 3 +-
drivers/tty/serial/vt8500_serial.c | 32 +-
drivers/tty/serial/xilinx_uartps.c | 4 +-
drivers/tty/serial/zs.c | 3 +-
drivers/tty/synclink_gt.c | 19 +-
drivers/tty/tty.h | 2 +-
drivers/tty/tty_buffer.c | 32 +-
drivers/tty/tty_io.c | 45 ++-
drivers/tty/tty_ldisc.c | 38 +-
include/linux/serdev.h | 13 +-
include/linux/serial_core.h | 80 ++++
include/linux/tty_buffer.h | 5 +-
include/linux/tty_flip.h | 4 +-
include/uapi/linux/serial.h | 55 ++-
92 files changed, 1447 insertions(+), 1246 deletions(-)
