Add the generic clocks for UART/USART in the sama5d2 driver to allow them
to be registered in the Common Clock Framework.
Signed-off-by: Sergiu Moga <sergiu.moga@xxxxxxxxxxxxx>
---
drivers/clk/at91/sama5d2.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index cfd0f5e23b99..84156dc52bff 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -120,6 +120,16 @@ static const struct {
struct clk_range r;
int chg_pid;
} sama5d2_gck[] = {
+ { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+ { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
{ .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, },
{ .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, },
{ .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
--
2.25.1
