The info structs are local only to the stm32-usart.c driver and are
triggering sparse warnings about being undecalred. Move these into
the main driver code and make them static to avoid the following
warnings:
drivers/tty/serial/stm32-usart.h:42:25: warning: symbol 'stm32f4_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:63:25: warning: symbol 'stm32f7_info' was not declared. Should it be static?
drivers/tty/serial/stm32-usart.h:85:25: warning: symbol 'stm32h7_info' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
---
drivers/tty/serial/stm32-usart.c | 69 ++++++++++++++++++++++++++++++++
drivers/tty/serial/stm32-usart.h | 68 -------------------------------
2 files changed, 69 insertions(+), 68 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 0973b03eeeaa..01f1ab2c18c0 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -35,6 +35,75 @@
#include "serial_mctrl_gpio.h"
#include "stm32-usart.h"
+
+/* Register offsets */
+static struct stm32_usart_info stm32f4_info = {
+ .ofs = {
+ .isr = 0x00,
+ .rdr = 0x04,
+ .tdr = 0x04,
+ .brr = 0x08,
+ .cr1 = 0x0c,
+ .cr2 = 0x10,
+ .cr3 = 0x14,
+ .gtpr = 0x18,
+ .rtor = UNDEF_REG,
+ .rqr = UNDEF_REG,
+ .icr = UNDEF_REG,
+ },
+ .cfg = {
+ .uart_enable_bit = 13,
+ .has_7bits_data = false,
+ .fifosize = 1,
+ }
+};
+
+static struct stm32_usart_info stm32f7_info = {
+ .ofs = {
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ },
+ .cfg = {
+ .uart_enable_bit = 0,
+ .has_7bits_data = true,
+ .has_swap = true,
+ .fifosize = 1,
+ }
+};
+
+static struct stm32_usart_info stm32h7_info = {
+ .ofs = {
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ },
+ .cfg = {
+ .uart_enable_bit = 0,
+ .has_7bits_data = true,
+ .has_swap = true,
+ .has_wakeup = true,
+ .has_fifo = true,
+ .fifosize = 16,
+ }
+};
+
static void stm32_usart_stop_tx(struct uart_port *port);
static void stm32_usart_transmit_chars(struct uart_port *port);
static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index ee69c203b926..0ec41a732c88 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -38,74 +38,6 @@ struct stm32_usart_info {
#define UNDEF_REG 0xff
-/* Register offsets */
-struct stm32_usart_info stm32f4_info = {
- .ofs = {
- .isr = 0x00,
- .rdr = 0x04,
- .tdr = 0x04,
- .brr = 0x08,
- .cr1 = 0x0c,
- .cr2 = 0x10,
- .cr3 = 0x14,
- .gtpr = 0x18,
- .rtor = UNDEF_REG,
- .rqr = UNDEF_REG,
- .icr = UNDEF_REG,
- },
- .cfg = {
- .uart_enable_bit = 13,
- .has_7bits_data = false,
- .fifosize = 1,
- }
-};
-
-struct stm32_usart_info stm32f7_info = {
- .ofs = {
- .cr1 = 0x00,
- .cr2 = 0x04,
- .cr3 = 0x08,
- .brr = 0x0c,
- .gtpr = 0x10,
- .rtor = 0x14,
- .rqr = 0x18,
- .isr = 0x1c,
- .icr = 0x20,
- .rdr = 0x24,
- .tdr = 0x28,
- },
- .cfg = {
- .uart_enable_bit = 0,
- .has_7bits_data = true,
- .has_swap = true,
- .fifosize = 1,
- }
-};
-
-struct stm32_usart_info stm32h7_info = {
- .ofs = {
- .cr1 = 0x00,
- .cr2 = 0x04,
- .cr3 = 0x08,
- .brr = 0x0c,
- .gtpr = 0x10,
- .rtor = 0x14,
- .rqr = 0x18,
- .isr = 0x1c,
- .icr = 0x20,
- .rdr = 0x24,
- .tdr = 0x28,
- },
- .cfg = {
- .uart_enable_bit = 0,
- .has_7bits_data = true,
- .has_swap = true,
- .has_wakeup = true,
- .has_fifo = true,
- .fifosize = 16,
- }
-};
-
/* USART_SR (F4) / USART_ISR (F7) */
#define USART_SR_PE BIT(0)
#define USART_SR_FE BIT(1)
--
2.35.1
