Replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx> --- drivers/i2c/busses/Kconfig | 4 ++-- drivers/mtd/parsers/Kconfig | 6 +++--- drivers/net/ethernet/broadcom/Kconfig | 4 ++-- drivers/pci/controller/Kconfig | 2 +- drivers/phy/broadcom/Kconfig | 4 ++-- drivers/pinctrl/bcm/Kconfig | 4 ++-- drivers/reset/Kconfig | 2 +- drivers/soc/bcm/bcm63xx/Kconfig | 4 ++-- drivers/tty/serial/Kconfig | 4 ++-- drivers/watchdog/Kconfig | 2 +- 10 files changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 45a4e9f1b639..fd9a4dd01997 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -487,8 +487,8 @@ config I2C_BCM_KONA config I2C_BRCMSTB tristate "BRCM Settop/DSL I2C controller" - depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \ - ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \ + BMIPS_GENERIC || COMPILE_TEST default y help If you say yes to this option, support will be included for the diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig index b43df73927a0..d6db655a1d24 100644 --- a/drivers/mtd/parsers/Kconfig +++ b/drivers/mtd/parsers/Kconfig @@ -69,8 +69,8 @@ config MTD_OF_PARTS config MTD_OF_PARTS_BCM4908 bool "BCM4908 partitioning support" - depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST) - default ARCH_BCM4908 + depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST) + default ARCH_BCMBCA help This provides partitions parser for BCM4908 family devices that can have multiple "firmware" partitions. It takes care of @@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908 config MTD_OF_PARTS_LINKSYS_NS bool "Linksys Northstar partitioning support" - depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST) + depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST) default ARCH_BCM_5301X help This provides partitions parser for Linksys devices based on Broadcom diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 56e0fb07aec7..f4e1ca68d831 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -53,8 +53,8 @@ config B44_PCI config BCM4908_ENET tristate "Broadcom BCM4908 internal mac support" - depends on ARCH_BCM4908 || COMPILE_TEST - default y if ARCH_BCM4908 + depends on ARCH_BCMBCA || COMPILE_TEST + default y if ARCH_BCMBCA help This driver supports Ethernet controller integrated into Broadcom BCM4908 family SoCs. diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index d1c5fcf00a8a..bfd9bac37e24 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -274,7 +274,7 @@ config VMD config PCIE_BRCMSTB tristate "Broadcom Brcmstb PCIe host controller" - depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \ + depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \ BMIPS_GENERIC || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index 93a6a8ee4716..1d89a2fd9b79 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -93,11 +93,11 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST + depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB if ARCH_BRCMSTB - default ARCH_BCM4908 || ARCH_BRCMSTB + default ARCH_BCMBCA || ARCH_BRCMSTB help Enable this to support the Broadcom STB USB PHY. This driver is required by the USB XHCI, EHCI and OHCI diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig index 8f4d89806fcb..35b51ce4298e 100644 --- a/drivers/pinctrl/bcm/Kconfig +++ b/drivers/pinctrl/bcm/Kconfig @@ -31,13 +31,13 @@ config PINCTRL_BCM2835 config PINCTRL_BCM4908 tristate "Broadcom BCM4908 pinmux driver" - depends on OF && (ARCH_BCM4908 || COMPILE_TEST) + depends on OF && (ARCH_BCMBCA || COMPILE_TEST) select PINMUX select PINCONF select GENERIC_PINCONF select GENERIC_PINCTRL_GROUPS select GENERIC_PINMUX_FUNCTIONS - default ARCH_BCM4908 + default ARCH_BCMBCA help Driver for BCM4908 family SoCs with integrated pin controller. diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index f9a7cee01659..7ae71535fe2a 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -201,7 +201,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT - default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC + default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig index 9e501c8ac5ce..355c34482076 100644 --- a/drivers/soc/bcm/bcm63xx/Kconfig +++ b/drivers/soc/bcm/bcm63xx/Kconfig @@ -13,8 +13,8 @@ endif # SOC_BCM63XX config BCM_PMB bool "Broadcom PMB (Power Management Bus) driver" - depends on ARCH_BCM4908 || (COMPILE_TEST && OF) - default ARCH_BCM4908 + depends on ARCH_BCMBCA || (COMPILE_TEST && OF) + default ARCH_BCMBCA select PM_GENERIC_DOMAINS if PM help This enables support for the Broadcom's PMB (Power Management Bus) that diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index e3279544b03c..f32bb01c3feb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE config SERIAL_BCM63XX tristate "Broadcom BCM63xx/BCM33xx UART support" select SERIAL_CORE - depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST - default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC + depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST + default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC help This enables the driver for the onchip UART core found on the following chipsets: diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 32fd37698932..1f85ec8a4b3b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1798,7 +1798,7 @@ config BCM7038_WDT tristate "BCM63xx/BCM7038 Watchdog" select WATCHDOG_CORE depends on HAS_IOMEM - depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST + depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST help Watchdog driver for the built-in hardware in Broadcom 7038 and later SoCs used in set-top boxes. BCM7038 was made public -- 2.34.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
