This patchset adds initial support for the Nuvoton Arbel NPCM8XX Board Management controller (BMC) SoC family. The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC. The NPCM8XX computing subsystem comprises a quadcore ARM Cortex A35 ARM-V8 architecture. This patchset adds minimal architecture and drivers such as: Clocksource, Clock, Reset, and WD. Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX. This patchset was tested on the Arbel NPCM8XX evaluation board. Addressed comments from: - Philipp Zabel: https://www.spinics.net/lists/arm-kernel/msg993305.html Changes since version 6: - NPCM reset driver - Modify warning message. - dt-bindings: serial: 8250: Add npcm845 compatible string patch accepted, due to it the patch removed from the patchset. Changes since version 5: - NPCM8XX clock driver - Remove refclk if devm_of_clk_add_hw_provider function failed. - NPCM8XX clock source driver - Remove NPCM8XX TIMER_OF_DECLARE support, using the same as NPCM7XX. Changes since version 4: - NPCM8XX clock driver - Use the same quote in the dt-binding file. Changes since version 3: - NPCM8XX clock driver - Rename NPCM8xx clock dt-binding header file. - Remove unused structures. - Improve Handling the clocks registration. - NPCM reset driver - Add ref phandle to dt-binding. Changes since version 2: - Remove NPCM8xx WDT compatible patch. - Remove NPCM8xx UART compatible patch. - NPCM8XX clock driver - Add debug new line. - Add 25M fixed rate clock. - Remove unused clocks and clock name from dt-binding. - NPCM reset driver - Revert to npcm7xx dt-binding. - Skip dt binding quotes. - Adding DTS backward compatibility. - Remove NPCM8xx binding include file. - Warp commit message. - NPCM8XX device tree: - Remove unused clock nodes (used in the clock driver) - Modify gcr and rst node names. Changes since version 1: - NPCM8XX clock driver - Modify dt-binding. - Remove unsed definition and include. - Include alphabetically. - Use clock devm. - NPCM reset driver - Modify dt-binding. - Modify syscon name. - Add syscon support to NPCM7XX dts reset node. - use data structure. - NPCM8XX device tree: - Modify evb compatible name. - Add NPCM7xx compatible. - Remove disable nodes from the EVB DTS. Tomer Maimon (16): dt-bindings: timer: npcm: Add npcm845 compatible string dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock clk: npcm8xx: add clock controller dt-bindings: reset: npcm: add GCR syscon property ARM: dts: nuvoton: add reset syscon property reset: npcm: using syscon instead of device data dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: Add NPCM8XX support dt-bindings: arm: npcm: Add maintainer dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: defconfig: Add Nuvoton NPCM family support .../devicetree/bindings/arm/npcm/npcm.yaml | 7 + .../bindings/arm/npcm/nuvoton,gcr.yaml | 2 + .../bindings/clock/nuvoton,npcm845-clk.yaml | 49 ++ .../bindings/reset/nuvoton,npcm750-reset.yaml | 10 +- .../bindings/timer/nuvoton,npcm7xx-timer.yaml | 2 + .../bindings/watchdog/nuvoton,npcm-wdt.txt | 3 +- MAINTAINERS | 2 + arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 1 + arch/arm64/Kconfig.platforms | 11 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/nuvoton/Makefile | 2 + .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 170 +++++ .../boot/dts/nuvoton/nuvoton-npcm845-evb.dts | 30 + .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++ arch/arm64/configs/defconfig | 3 + drivers/clk/Kconfig | 6 + drivers/clk/Makefile | 1 + drivers/clk/clk-npcm8xx.c | 600 ++++++++++++++++++ drivers/reset/reset-npcm.c | 207 +++++- .../dt-bindings/clock/nuvoton,npcm845-clk.h | 49 ++ 20 files changed, 1196 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi create mode 100644 drivers/clk/clk-npcm8xx.c create mode 100644 include/dt-bindings/clock/nuvoton,npcm845-clk.h -- 2.33.0
