[PATCH v4 1/9] tty: n_gsm: fix user open not possible at responder until initiator open

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Starke <daniel.starke@xxxxxxxxxxx>

After setting up the control channel on both sides the responder side may
want to open a virtual tty to listen on until the initiator starts an
application on a user channel. The current implementation allows the
open() but no other operation, like termios. These fail with EINVAL.
The responder sided application has no means to detect an open by the
initiator sided application this way. And the initiator sided applications
usually expect the responder sided application to listen on the user
channel upon open.
Set the user channel into half-open state on responder side once a user
application opens the virtual tty to allow IO operations on it.
Furthermore, keep the user channel constipated until the initiator side
opens it to give the responder sided application the chance to detect the
new connection and to avoid data loss if the responder sided application
starts sending before the user channel is open.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@xxxxxxxxxxx>
---
 drivers/tty/n_gsm.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

Stable backport remark has been removed compared to v3. No other changes applied.

Link: https://lore.kernel.org/all/20220530144512.2731-1-daniel.starke@xxxxxxxxxxx/

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index fd8b86dde525..63314fe5e43b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1493,6 +1493,8 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 	if (debug & 8)
 		pr_debug("DLCI %d goes closed.\n", dlci->addr);
 	dlci->state = DLCI_CLOSED;
+	/* Prevent us from sending data before the link is up again */
+	dlci->constipated = true;
 	if (dlci->addr != 0) {
 		tty_port_tty_hangup(&dlci->port, false);
 		spin_lock_irqsave(&dlci->lock, flags);
@@ -1522,6 +1524,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 	del_timer(&dlci->t1);
 	/* This will let a tty open continue */
 	dlci->state = DLCI_OPEN;
+	dlci->constipated = false;
 	if (debug & 8)
 		pr_debug("DLCI %d goes open.\n", dlci->addr);
 	/* Send current modem state */
@@ -1602,6 +1605,25 @@ static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
 	mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
 }
 
+/**
+ *	gsm_dlci_set_opening	-	change state to opening
+ *	@dlci: DLCI to open
+ *
+ *	Change internal state to wait for DLCI open from initiator side.
+ *	We set off timers and responses upon reception of an SABM.
+ */
+static void gsm_dlci_set_opening(struct gsm_dlci *dlci)
+{
+	switch (dlci->state) {
+	case DLCI_CLOSED:
+	case DLCI_CLOSING:
+		dlci->state = DLCI_OPENING;
+		break;
+	default:
+		break;
+	}
+}
+
 /**
  *	gsm_dlci_begin_close	-	start channel open procedure
  *	@dlci: DLCI to open
@@ -1745,10 +1767,13 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 	dlci->addr = addr;
 	dlci->adaption = gsm->adaption;
 	dlci->state = DLCI_CLOSED;
-	if (addr)
+	if (addr) {
 		dlci->data = gsm_dlci_data;
-	else
+		/* Prevent us from sending data before the link is up */
+		dlci->constipated = true;
+	} else {
 		dlci->data = gsm_dlci_command;
+	}
 	gsm->dlci[addr] = dlci;
 	return dlci;
 }
@@ -3163,6 +3188,8 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	/* Start sending off SABM messages */
 	if (gsm->initiator)
 		gsm_dlci_begin_open(dlci);
+	else
+		gsm_dlci_set_opening(dlci);
 	/* And wait for virtual carrier */
 	return tty_port_block_til_ready(port, tty, filp);
 }
-- 
2.34.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux