Re: [PATCH 1/1] 8250_dwlib: Convert bitops to newer form

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 30, 2022 at 12:08 PM Ilpo Järvinen
<ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
>
> Instead of open-coding, use BIT(), GENMASK(), and FIELD_GET() helpers.

FIELD_GET() requires bitfield.h to be included. Is this the case already?
If so,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_dwlib.c | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
> index da330ef46446..a8bbed74ea70 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.c
> +++ b/drivers/tty/serial/8250/8250_dwlib.c
> @@ -46,21 +46,21 @@
>  #define DW_UART_LCR_EXT_TRANSMIT_MODE  BIT(3)
>
>  /* Component Parameter Register bits */
> -#define DW_UART_CPR_ABP_DATA_WIDTH     (3 << 0)
> -#define DW_UART_CPR_AFCE_MODE          (1 << 4)
> -#define DW_UART_CPR_THRE_MODE          (1 << 5)
> -#define DW_UART_CPR_SIR_MODE           (1 << 6)
> -#define DW_UART_CPR_SIR_LP_MODE                (1 << 7)
> -#define DW_UART_CPR_ADDITIONAL_FEATURES        (1 << 8)
> -#define DW_UART_CPR_FIFO_ACCESS                (1 << 9)
> -#define DW_UART_CPR_FIFO_STAT          (1 << 10)
> -#define DW_UART_CPR_SHADOW             (1 << 11)
> -#define DW_UART_CPR_ENCODED_PARMS      (1 << 12)
> -#define DW_UART_CPR_DMA_EXTRA          (1 << 13)
> -#define DW_UART_CPR_FIFO_MODE          (0xff << 16)
> +#define DW_UART_CPR_ABP_DATA_WIDTH     GENMASK(1, 0)
> +#define DW_UART_CPR_AFCE_MODE          BIT(4)
> +#define DW_UART_CPR_THRE_MODE          BIT(5)
> +#define DW_UART_CPR_SIR_MODE           BIT(6)
> +#define DW_UART_CPR_SIR_LP_MODE                BIT(7)
> +#define DW_UART_CPR_ADDITIONAL_FEATURES        BIT(8)
> +#define DW_UART_CPR_FIFO_ACCESS                BIT(9)
> +#define DW_UART_CPR_FIFO_STAT          BIT(10)
> +#define DW_UART_CPR_SHADOW             BIT(11)
> +#define DW_UART_CPR_ENCODED_PARMS      BIT(12)
> +#define DW_UART_CPR_DMA_EXTRA          BIT(13)
> +#define DW_UART_CPR_FIFO_MODE          GENMASK(23, 16)
>
>  /* Helper for FIFO size calculation */
> -#define DW_UART_CPR_FIFO_SIZE(a)       (((a >> 16) & 0xff) * 16)
> +#define DW_UART_CPR_FIFO_SIZE(a)       (FIELD_GET(DW_UART_CPR_FIFO_MODE, (a)) * 16)
>
>  /*
>   * divisor = div(I) + div(F)
> --
> 2.30.2
>


-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux