Re: [PATCH 6/6] i2c: Make remove callback return void

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

[keeping only individuals and lists in Cc to avoid bounces]

On 28/06/22 16:03, Uwe Kleine-König wrote:
> From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
> 
> The value returned by an i2c driver's remove function is mostly ignored.
> (Only an error message is printed if the value is non-zero that the
> error is ignored.)
> 
> So change the prototype of the remove function to return no value. This
> way driver authors are not tempted to assume that passing an error to
> the upper layer is a good idea. All drivers are adapted accordingly.
> There is no intended change of behaviour, all callbacks were prepared to
> return 0 before.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

For versaclock:

> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
> index e7be3e54b9be..657493ecce4c 100644
> --- a/drivers/clk/clk-versaclock5.c
> +++ b/drivers/clk/clk-versaclock5.c
> @@ -1138,7 +1138,7 @@ static int vc5_probe(struct i2c_client *client)
>  	return ret;
>  }
>  
> -static int vc5_remove(struct i2c_client *client)
> +static void vc5_remove(struct i2c_client *client)
>  {
>  	struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
>  
> @@ -1146,8 +1146,6 @@ static int vc5_remove(struct i2c_client *client)
>  
>  	if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
>  		clk_unregister_fixed_rate(vc5->pin_xin);
> -
> -	return 0;
>  }
>  
>  static int __maybe_unused vc5_suspend(struct device *dev)

Reviewed-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
Reviewed-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>

-- 
Luca



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux