Hi,
On 6/28/22 19:02, Jeremy Linton wrote:
5.19rc4 crashes with:
[ 4.441703] Internal error: Oops: 96000004 [#1] SMP
[ 4.446601] Modules linked in:
[ 4.449668] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-0.rc4.33.fc37.aarch64 #1
[ 4.457532] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019
[ 4.470800] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.477791] pc : dw8250_handle_irq+0x58/0x190
[ 4.482170] lr : dw8250_handle_irq+0x38/0x190
[ 4.486544] sp : ffff800008003e40
[ 4.489869] x29: ffff800008003e40 x28: ffffbe13be183980 x27: 00000000b46bd3d0
[ 4.497036] x26: ffffbe13bdbc3008 x25: ffff6f1447910f80 x24: ffff6f1447910f94
[ 4.504204] x23: 0000000000000012 x22: ffff6f144218fc80 x21: 0000000000000000
[ 4.511372] x20: 0000000000000007 x19: ffffbe13be7628d0 x18: ffff80000918b528
[ 4.518540] x17: ffffb103c0343000 x16: ffff800008004000 x15: 0000000000004000
[ 4.525706] x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
[ 4.532872] x11: ffffbe13be16f6d8 x10: 0000000000001d90 x9 : ffffbe13bc6b4f0c
[ 4.540040] x8 : ffffbe13be185770 x7 : 0000000000000000 x6 : 00000000296b5f4a
[ 4.547206] x5 : 00ffffffffffffff x4 : 0000000000010002 x3 : ffffbe13be7628d0
[ 4.554373] x2 : 0000000000000007 x1 : 0000000000000000 x0 : 0000000000000000
[ 4.561539] Call trace:
[ 4.563994] dw8250_handle_irq+0x58/0x190
[ 4.568020] serial8250_interrupt+0x68/0x140
[ 4.572307] __handle_irq_event_percpu+0x68/0x230
[ 4.577034] handle_irq_event+0x58/0x120
[ 4.580973] handle_fasteoi_irq+0xcc/0x1c4
[ 4.585086] generic_handle_domain_irq+0x38/0x50
[ 4.589723] gic_handle_irq+0x50/0xe0
[ 4.593399] call_on_irq_stack+0x2c/0x38
[ 4.597338] do_interrupt_handler+0xdc/0xe0
[ 4.601539] el1_interrupt+0x34/0x70
[ 4.605131] el1h_64_irq_handler+0x18/0x24
[ 4.609244] el1h_64_irq+0x68/0x6c
[ 4.612658] arch_cpu_idle+0x18/0x2c
[ 4.616246] default_idle_call+0x34/0x18c
[ 4.620273] cpuidle_idle_call+0x154/0x1a0
[ 4.624388] do_idle+0xa4/0xf4
[ 4.627455] cpu_startup_entry+0x34/0x3c
[ 4.631394] kernel_init+0x0/0x150
[ 4.634808] arch_post_acpi_subsys_init+0x0/0x30
[ 4.639445] start_kernel+0x474/0x490
[ 4.643121] __primary_switched+0xc0/0xc8
[ 4.647148] Code: 7100305f 1a9f17f5 f100003f 7a400aa4 (b9400817)
[ 4.653267] ---[ end trace 0000000000000000 ]---
On an ACPI enabled Mcbin. This is again the result
of the pdata information not being available on an
ACPI machine. But since there are multiple commits
I've broken this into to fixes. The first
simply reverts the USR register change because it
should be functionality transparent and I don't
have a good way to tie ACPI ids to the hardware
and the second fixes the later patch which uses it
in the interrupt handler.
Hi,
I missed cd16044d7c38 ("serial: 8250: dw: enable using pdata with ACPI")
in tty-linus, which fixes this. So please ignore this set, sorry about
the noise.
Thanks,
