Change 'timeing' to 'timing'. Change 'Characteres' to 'Characters'. Signed-off-by: Zhang Jiaming <jiaming@xxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fdf21de74e90..a7ed5012b90e 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1510,7 +1510,7 @@ static inline void __stop_tx(struct uart_8250_port *p) if (!(lsr & UART_LSR_THRE)) return; /* - * To provide required timeing and allow FIFO transfer, + * To provide required timing and allow FIFO transfer, * __stop_tx_rs485() must be called only when both FIFO and * shift register are empty. The device driver should either * enable interrupt on TEMT or set UART_CAP_NOTEMT that will @@ -2796,7 +2796,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, port->read_status_mask |= UART_LSR_BI; /* - * Characteres to ignore + * Characters to ignore */ port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) -- 2.34.1