[PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata"

[Jeremy Linton <jeremy.linton@xxxxxxx>]

pdata is only setup by DT machines, leaving ACPI machines
with null pdata. Since I don't know the exact mapping of
ACPI ID's to dw 8250 variations I can't add pdata to them
without possibly breaking something. As such the simplest
fix here is probably just to revert this commit.

This reverts commit ffd381445eac2aa624e49bab5a811451e8351008.
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
---
 drivers/tty/serial/8250/8250_dw.c    | 9 +++------
 drivers/tty/serial/8250/8250_dwlib.h | 2 +-
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f57bbd32ef11..53e488beb8c2 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -275,7 +275,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 
 	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 		/* Clear the USR */
-		(void)p->serial_in(p, d->pdata->usr_reg);
+		(void)p->serial_in(p, d->usr_reg);
 
 		return 1;
 	}
@@ -447,6 +447,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			p->serial_out = dw8250_serial_outq;
 			p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
 			p->type = PORT_OCTEON;
+			data->usr_reg = OCTEON_UART_USR;
 			data->skip_autocfg = true;
 		}
 #endif
@@ -536,6 +537,7 @@ static int dw8250_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	data->data.dma.fn = dw8250_fallback_dma_filter;
+	data->usr_reg = DW_UART_USR;
 	data->pdata = device_get_match_data(p->dev);
 	p->private_data = &data->data;
 
@@ -738,27 +740,22 @@ static const struct dev_pm_ops dw8250_pm_ops = {
 };
 
 static const struct dw8250_platform_data dw8250_dw_apb = {
-	.usr_reg = DW_UART_USR,
 };
 
 static const struct dw8250_platform_data dw8250_octeon_3860_data = {
-	.usr_reg = OCTEON_UART_USR,
 	.quirks = DW_UART_QUIRK_OCTEON,
 };
 
 static const struct dw8250_platform_data dw8250_armada_38x_data = {
-	.usr_reg = DW_UART_USR,
 	.quirks = DW_UART_QUIRK_ARMADA_38X,
 };
 
 static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
-	.usr_reg = DW_UART_USR,
 	.cpr_val = 0x00012f32,
 	.quirks = DW_UART_QUIRK_IS_DMA_FC,
 };
 
 static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
-	.usr_reg = DW_UART_USR,
 	.quirks = DW_UART_QUIRK_SKIP_SET_RATE,
 };
 
diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
index 055bfdc87985..9870ad0d54e4 100644
--- a/drivers/tty/serial/8250/8250_dwlib.h
+++ b/drivers/tty/serial/8250/8250_dwlib.h
@@ -26,7 +26,6 @@ struct dw8250_port_data {
 };
 
 struct dw8250_platform_data {
-	u8 usr_reg;
 	u32 cpr_val;
 	unsigned int quirks;
 };
@@ -35,6 +34,7 @@ struct dw8250_data {
 	struct dw8250_port_data	data;
 	const struct dw8250_platform_data *pdata;
 
+	u8			usr_reg;
 	int			msr_mask_on;
 	int			msr_mask_off;
 	struct clk		*clk;
-- 
2.35.1