The src_maxburst and dst_maxburst have been changed to 1 but the settings
of the UCON register aren't changed yet. They should be changed as well
according to the dmaengine slave config.
Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions")
Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Chanho Park <chanho61.park@xxxxxxxxxxx>
---
drivers/tty/serial/samsung_tty.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 679789bf856d..2b9c56c77676 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -383,8 +383,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
/* Enable tx dma mode */
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
- ucon |= (dma_get_cache_alignment() >= 16) ?
- S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
+ ucon |= S3C64XX_UCON_TXBURST_1;
ucon |= S3C64XX_UCON_TXMODE_DMA;
wr_regl(port, S3C2410_UCON, ucon);
@@ -680,7 +679,7 @@ static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
S3C64XX_UCON_DMASUS_EN |
S3C64XX_UCON_TIMEOUT_EN |
S3C64XX_UCON_RXMODE_MASK);
- ucon |= S3C64XX_UCON_RXBURST_16 |
+ ucon |= S3C64XX_UCON_RXBURST_1 |
0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
S3C64XX_UCON_EMPTYINT_EN |
S3C64XX_UCON_TIMEOUT_EN |
--
2.36.1
