Hi Jiri,
Thanks for the tip.
On 2022/4/19 15:38, Jiri Slaby wrote:
[ EXTERNAL EMAIL ]
Hi,
On 19. 04. 22, 9:29, Yu Tu wrote:
Hi Andy,
Thank you for your advice.
On 2022/4/18 20:09, Andy Shevchenko wrote:
[ EXTERNAL EMAIL ]
On Mon, Apr 18, 2022 at 8:50 AM Yu Tu <yu.tu@xxxxxxxxxxx> wrote:
A /2 divider over XTAL was introduced since G12A, and is preferred
to be used over the still present /3 divider since it provides much
closer frequencies vs the request baudrate.Especially the BT module
'e. E' (mind the space)
My statement is a whole. There should be no spaces.
Period should be followed by a space, of course.
I got it .This will be corrected in the next version.
uses 3Mhz baud rate. 8Mhz calculations can lead to baud rate bias,
causing some problems.
...
+struct meson_uart_data {
+ bool has_xtal_div2;
I would prefer to see this as an unsigned int and with a less
particular name, e.g. xtal_div would suffice.
I don't have a problem with your suggestion.Let's see What Neil has to
say.
Actually why uint provided it's a boolean value? Or do you mean to store
the divisor directly in this member, Andy?
thanks,
