[PATCH v4 2/5] serial: 8250: Fold EndRun device support into OxSemi Tornado code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and uses the same sequence to determine the
number of ports available.  Despite that we have duplicate code
specific to the EndRun device.

Remove redundant code then and factor out OxSemi Tornado device
detection.

Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
---
Changes from v3:

- Factor out baud base correction along with the `Fixes' tag to 1/5.

- Discard the change to move the EndRun vendor:device ID macros to 
  <linux/pci_ids.h>.

New change in v3.
---
 drivers/tty/serial/8250/8250_pci.c |   76 ++++++++++++-------------------------
 1 file changed, 25 insertions(+), 51 deletions(-)

linux-serial-8250-oxsemi-endrun.diff
Index: linux-macro/drivers/tty/serial/8250/8250_pci.c
===================================================================
--- linux-macro.orig/drivers/tty/serial/8250/8250_pci.c
+++ linux-macro/drivers/tty/serial/8250/8250_pci.c
@@ -994,41 +994,29 @@ static void pci_ite887x_exit(struct pci_
 }
 
 /*
- * EndRun Technologies.
- * Determine the number of ports available on the device.
+ * Oxford Semiconductor Inc.
+ * Check if an OxSemi device is part of the Tornado range of devices.
  */
 #define PCI_VENDOR_ID_ENDRUN			0x7401
 #define PCI_DEVICE_ID_ENDRUN_1588	0xe100
 
-static int pci_endrun_init(struct pci_dev *dev)
+static bool pci_oxsemi_tornado_p(struct pci_dev *dev)
 {
-	u8 __iomem *p;
-	unsigned long deviceID;
-	unsigned int  number_uarts = 0;
+	/* OxSemi Tornado devices are all 0xCxxx */
+	if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
+	    (dev->device & 0xf000) != 0xc000)
+		return false;
 
-	/* EndRun device is all 0xexxx */
+	/* EndRun devices are all 0xExxx */
 	if (dev->vendor == PCI_VENDOR_ID_ENDRUN &&
-		(dev->device & 0xf000) != 0xe000)
-		return 0;
-
-	p = pci_iomap(dev, 0, 5);
-	if (p == NULL)
-		return -ENOMEM;
+	    (dev->device & 0xf000) != 0xe000)
+		return false;
 
-	deviceID = ioread32(p);
-	/* EndRun device */
-	if (deviceID == 0x07000200) {
-		number_uarts = ioread8(p + 4);
-		pci_dbg(dev, "%d ports detected on EndRun PCI Express device\n", number_uarts);
-	}
-	pci_iounmap(dev, p);
-	return number_uarts;
+	return true;
 }
 
 /*
- * Oxford Semiconductor Inc.
- * Check that device is part of the Tornado range of devices, then determine
- * the number of ports available on the device.
+ * Determine the number of ports available on a Tornado device.
  */
 static int pci_oxsemi_tornado_init(struct pci_dev *dev)
 {
@@ -1036,9 +1024,7 @@ static int pci_oxsemi_tornado_init(struc
 	unsigned long deviceID;
 	unsigned int  number_uarts = 0;
 
-	/* OxSemi Tornado devices are all 0xCxxx */
-	if (dev->vendor == PCI_VENDOR_ID_OXSEMI &&
-	    (dev->device & 0xF000) != 0xC000)
+	if (!pci_oxsemi_tornado_p(dev))
 		return 0;
 
 	p = pci_iomap(dev, 0, 5);
@@ -1049,7 +1035,10 @@ static int pci_oxsemi_tornado_init(struc
 	/* Tornado device */
 	if (deviceID == 0x07000200) {
 		number_uarts = ioread8(p + 4);
-		pci_dbg(dev, "%d ports detected on Oxford PCI Express device\n", number_uarts);
+		pci_dbg(dev, "%d ports detected on %s PCI Express device\n",
+			number_uarts,
+			dev->vendor == PCI_VENDOR_ID_ENDRUN ?
+			"EndRun" : "Oxford");
 	}
 	pci_iounmap(dev, p);
 	return number_uarts;
@@ -2244,7 +2233,7 @@ static struct pci_serial_quirk pci_seria
 		.device		= PCI_ANY_ID,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.init		= pci_endrun_init,
+		.init		= pci_oxsemi_tornado_init,
 		.setup		= pci_default_setup,
 	},
 	/*
@@ -2667,7 +2656,6 @@ enum pci_board_num_t {
 	pbn_panacom2,
 	pbn_panacom4,
 	pbn_plx_romulus,
-	pbn_endrun_2_3906250,
 	pbn_oxsemi,
 	pbn_oxsemi_1_3906250,
 	pbn_oxsemi_2_3906250,
@@ -3190,20 +3178,6 @@ static struct pciserial_board pci_boards
 	},
 
 	/*
-	 * EndRun Technologies
-	* Uses the size of PCI Base region 0 to
-	* signal now many ports are available
-	* 2 port 952 Uart support
-	*/
-	[pbn_endrun_2_3906250] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 2,
-		.base_baud	= 3906250,
-		.uart_offset	= 0x200,
-		.first_offset	= 0x1000,
-	},
-
-	/*
 	 * This board uses the size of PCI Base region 0 to
 	 * signal now many ports are available
 	 */
@@ -4123,13 +4097,6 @@ static const struct pci_device_id serial
 		0x10b5, 0x106a, 0, 0,
 		pbn_plx_romulus },
 	/*
-	* EndRun Technologies. PCI express device range.
-	*    EndRun PTP/1588 has 2 Native UARTs.
-	*/
-	{	PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_endrun_2_3906250 },
-	/*
 	 * Quatech cards. These actually have configurable clocks but for
 	 * now we just use the default.
 	 *
@@ -4390,6 +4357,13 @@ static const struct pci_device_id serial
 	{	PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM,
 		PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0,
 		pbn_oxsemi_2_3906250 },
+	/*
+	 * EndRun Technologies. PCI express device range.
+	 * EndRun PTP/1588 has 2 Native UARTs utilizing OxSemi 952.
+	 */
+	{	PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_oxsemi_2_3906250 },
 
 	/*
 	 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux