Re: [PATCH v5 04/11] serial: 8250: dw: Move the USR register to pdata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 13, 2022 at 09:51:34AM +0200, Miquel Raynal wrote:
> This offset is a good candidate to pdata's because it changes depending
> on the vendor implementation. Let's move the usr_reg entry from regular
> to pdata. This way we can drop initializing it at run time.
> 
> Let's also use a define for it instead of defining only the default
> value.

Yep, thanks!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_dw.c    | 11 ++++++++---
>  drivers/tty/serial/8250/8250_dwlib.h |  2 +-
>  2 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 93b112f3bc49..babf5dc597a8 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -35,6 +35,8 @@
>  /* Offsets for the DesignWare specific registers */
>  #define DW_UART_USR	0x1f /* UART Status Register */
>  
> +#define OCTEON_UART_USR	0x27 /* UART Status Register */
> +
>  /* DesignWare specific register fields */
>  #define DW_UART_MCR_SIRE		BIT(6)
>  
> @@ -251,7 +253,7 @@ static int dw8250_handle_irq(struct uart_port *p)
>  
>  	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
>  		/* Clear the USR */
> -		(void)p->serial_in(p, d->usr_reg);
> +		(void)p->serial_in(p, d->pdata->usr_reg);
>  
>  		return 1;
>  	}
> @@ -387,7 +389,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>  			p->serial_out = dw8250_serial_outq;
>  			p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
>  			p->type = PORT_OCTEON;
> -			data->usr_reg = 0x27;
>  			data->skip_autocfg = true;
>  		}
>  #endif
> @@ -462,7 +463,6 @@ static int dw8250_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	data->data.dma.fn = dw8250_fallback_dma_filter;
> -	data->usr_reg = DW_UART_USR;
>  	data->pdata = device_get_match_data(p->dev);
>  	p->private_data = &data->data;
>  
> @@ -681,20 +681,25 @@ static const struct dev_pm_ops dw8250_pm_ops = {
>  };
>  
>  static const struct dw8250_platform_data dw8250_dw_apb = {
> +	.usr_reg = DW_UART_USR,
>  };
>  
>  static const struct dw8250_platform_data dw8250_octeon_3860_data = {
> +	.usr_reg = OCTEON_UART_USR,
>  	.quirks = DW_UART_QUIRK_OCTEON,
>  };
>  
>  static const struct dw8250_platform_data dw8250_armada_38x_data = {
> +	.usr_reg = DW_UART_USR,
>  	.quirks = DW_UART_QUIRK_ARMADA_38X,
>  };
>  
>  static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
> +	.usr_reg = DW_UART_USR,
>  };
>  
>  static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
> +	.usr_reg = DW_UART_USR,
>  	.quirks = DW_UART_QUIRK_SKIP_SET_RATE,
>  };
>  
> diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
> index 68bb81bee660..0df6baa6eaee 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.h
> +++ b/drivers/tty/serial/8250/8250_dwlib.h
> @@ -22,6 +22,7 @@ struct dw8250_port_data {
>  };
>  
>  struct dw8250_platform_data {
> +	u8 usr_reg;
>  	unsigned int quirks;
>  };
>  
> @@ -29,7 +30,6 @@ struct dw8250_data {
>  	struct dw8250_port_data	data;
>  	const struct dw8250_platform_data *pdata;
>  
> -	u8			usr_reg;
>  	int			msr_mask_on;
>  	int			msr_mask_off;
>  	struct clk		*clk;
> -- 
> 2.27.0
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux