* Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> [220411 09:59]:
> On Mon, Apr 11, 2022 at 12:48:05PM +0300, Tony Lindgren wrote:
> > Commit 932d596378b0 ("serial: 8250: Return early in .start_tx() if there
> > are no chars to send") caused a regression where the drivers implementing
> > runtime PM stopped idling.
> >
> > We need to call serial8250_rpm_put_tx() on early exit, it normally gets
> > called later on at __stop_tx().
> >
> > Fixes: 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send")
> > Cc: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
> > Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> > ---
> > drivers/tty/serial/8250/8250_port.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> > --- a/drivers/tty/serial/8250/8250_port.c
> > +++ b/drivers/tty/serial/8250/8250_port.c
> > @@ -1677,8 +1677,10 @@ static void serial8250_start_tx(struct uart_port *port)
> >
> > serial8250_rpm_get_tx(up);
> >
> > - if (!port->x_char && uart_circ_empty(&port->state->xmit))
> > + if (!port->x_char && uart_circ_empty(&port->state->xmit)) {
> > + serial8250_rpm_put_tx(up);
> > return;
> > + }
>
> Assuming you don't need serial8250_rpm_get_tx() to check the condition,
> it would be easier to move the early return before the call to
> serial8250_rpm_get_tx().
Yeah good suggestion, that should work.
Regards,
Tony
