On Sat, Apr 02, 2022 at 08:40:11PM +0200, Krzysztof Kozlowski wrote: > Convert the Qualcomm General Serial Bus Interface (GSBI) to DT > Schema. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > --- > .../bindings/soc/qcom/qcom,gsbi.txt | 87 ------------ > .../bindings/soc/qcom/qcom,gsbi.yaml | 133 ++++++++++++++++++ > 2 files changed, 133 insertions(+), 87 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml Great initiative to convert everything in one go! [...] > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml > new file mode 100644 > index 000000000000..b97e359f3f90 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml > @@ -0,0 +1,133 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm General Serial Bus Interface (GSBI) > + > +maintainers: > + - Andy Gross <agross@xxxxxxxxxx> > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > + > +description: > + The GSBI controller is modeled as a node with zero or more child nodes, each > + representing a serial sub-node device that is mux'd as part of the GSBI > + configuration settings. The mode setting will govern the input/output mode > + of the 4 GSBI IOs. > + > + A GSBI controller node can contain 0 or more child nodes representing serial > + devices. These serial devices can be a QCOM UART, I2C controller, spi > + controller, or some combination of aforementioned devices. > + > +properties: > + compatible: > + enum: > + - qcom,gsbi-v1.0.0 Only 1 entry? const. -Kuldeep
