Add support for the UART on the ARTPEC-8 SoC.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
---
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/samsung_tty.c | 38 ++++++++++++++++++++++++++++++++
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e952ec5c7a7c..ae120d3d933a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index d002a4e48ed9..4f9e74c6bcef 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2837,6 +2837,36 @@ static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
#endif
+#if defined(CONFIG_ARCH_ARTPEC)
+static struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Axis ARTPEC-8 UART",
+ .type = TYPE_S3C6400,
+ .port_type = PORT_S3C6400,
+ .fifosize = 128,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ }
+};
+#define ARTPEC8_SERIAL_DRV_DATA ((kernel_ulong_t)&artpec8_serial_drv_data)
+#else
+#define ARTPEC8_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
{
.name = "s3c2410-uart",
@@ -2866,6 +2896,10 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
.name = "exynos850-uart",
.driver_data = EXYNOS850_SERIAL_DRV_DATA,
},
+ {
+ .name = "artpec8-uart",
+ .driver_data = ARTPEC8_SERIAL_DRV_DATA,
+ },
{ },
};
MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
@@ -2888,6 +2922,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
{ .compatible = "apple,s5l-uart",
.data = (void *)S5L_SERIAL_DRV_DATA },
+ { .compatible = "axis,artpec8-uart",
+ .data = (void *)ARTPEC8_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos850-uart",
.data = (void *)EXYNOS850_SERIAL_DRV_DATA },
{},
@@ -3043,6 +3079,8 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
s5pv210_early_console_setup);
OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
+ s5pv210_early_console_setup);
/* Apple S5L */
static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
--
2.34.1
