Le 17/02/2022 à 10:46, Michael Walle a écrit :
Add early console support which relies on the bootloader for the initialization of the UART. Please note, that the compatibles are taken from at91-usart MFD driver. Signed-off-by: Michael Walle <michael@xxxxxxxx>
Acked-by: Richard Genoud <richard.genoud@xxxxxxxxx>
--- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/atmel_serial.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0e5ccb25bdb1..407a98ec0791 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -139,6 +139,7 @@ config SERIAL_ATMEL_CONSOLE bool "Support for console on AT91 serial port" depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Say Y here if you wish to use an on-chip UART on a Atmel AT91 processor as the system console (the system diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 2d09a89974a2..73d43919898d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2673,6 +2673,30 @@ static struct console atmel_console = { .data = &atmel_uart, };+static void atmel_serial_early_write(struct console *con, const char *s,+ unsigned int n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, atmel_console_putchar); +} + +static int __init atmel_early_console_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = atmel_serial_early_write; + + return 0; +} + +OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91rm9200-usart", + atmel_early_console_setup); +OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91sam9260-usart", + atmel_early_console_setup); + #define ATMEL_CONSOLE_DEVICE (&atmel_console)#else
Thanks !
