Hi Uwe,
> -----Original Message-----
> From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> Sent: 2021年11月23日 16:43
> To: Sherry Sun <sherry.sun@xxxxxxx>
> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; jirislaby@xxxxxxxxxx; linux-
> serial@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; dl-linux-imx <linux-
> imx@xxxxxxx>
> Subject: Re: [PATCH] tty: serial: imx: disable UCR4_OREN in .stop_rx()
>
> Hello again,
>
> On Tue, Nov 23, 2021 at 08:51:22AM +0100, Uwe Kleine-König wrote:
> > On Tue, Nov 23, 2021 at 03:04:37PM +0800, Sherry Sun wrote:
> > > From: Fugang Duan <fugang.duan@xxxxxxx>
> > >
> > > Disable UCR4_OREN bit in .stop_rx() to avoid endless interrupt
> > > happen while tty port is closing.
> > >
> > > Signed-off-by: Fugang Duan <fugang.duan@xxxxxxx>
> > > Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
> > > ---
> > > drivers/tty/serial/imx.c | 5 ++++-
> > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> > > index fb75e3e0d828..9ecaf051249d 100644
> > > --- a/drivers/tty/serial/imx.c
> > > +++ b/drivers/tty/serial/imx.c
> > > @@ -486,18 +486,21 @@ static void imx_uart_stop_tx(struct uart_port
> > > *port) static void imx_uart_stop_rx(struct uart_port *port) {
> > > struct imx_port *sport = (struct imx_port *)port;
> > > - u32 ucr1, ucr2;
> > > + u32 ucr1, ucr2, ucr4;
> > >
> > > ucr1 = imx_uart_readl(sport, UCR1);
> > > ucr2 = imx_uart_readl(sport, UCR2);
> > > + ucr4 = imx_uart_readl(sport, UCR4);
> > >
> > > if (sport->dma_is_enabled) {
> > > ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN);
> > > } else {
> > > ucr1 &= ~UCR1_RRDYEN;
> > > ucr2 &= ~UCR2_ATEN;
> > > + ucr4 &= ~UCR4_OREN;
> > > }
> > > imx_uart_writel(sport, ucr1, UCR1);
> > > + imx_uart_writel(sport, ucr4, UCR4);
> >
> > I don't understand this yet, but I guess this is just a matter of
> > improving the commit log. How does the endless irq happen?
To be frankly, this patch is an old local patch, I also don't know the history about it.
But I checked the code logic is fine, the UCR4_OREN should be disabled when stop rx.
> >
> > ... some time later after thinking and reading the driver source ...
> >
> > Hmm, when the OR event is triggered the handler does
> >
> > imx_uart_writel(sport, USR2_ORE, USR2);
> >
> > and so clears the event. I would expect that this should be good
> > enough to prevent an irq storm even if the receiver is disabled.
> > Doesn't acking work with the receiver disabled?
>
> One thing I forgot to mention:
>
> If imx_uart_stop_rx() now clears UCR4_OREN, clearing in
> imx_uart_shutdown() should probably be dropped.
You are right, with this patch, clear the UCR4_OREN in imx_uart_shutdown is not necessary any more, I will remove it and send V2. Thank!
Best regards
Sherry
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König |
> Industrial Linux Solutions | https://www.pengutronix.de/ |
