From: Rafał Miłecki <rafal@xxxxxxxxxx>
This helps validating DTS files.
Redundant generic descriptions (e.g. "The base address of the UART
register bank") were dropped and periph_clk was dropped from example as
not required.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
.../bindings/serial/brcm,bcm6345-uart.txt | 36 --------------
.../bindings/serial/brcm,bcm6345-uart.yaml | 47 +++++++++++++++++++
2 files changed, 47 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
deleted file mode 100644
index 8b2b0460259a..000000000000
--- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* BCM63xx UART
-
-Required properties:
-
-- compatible: "brcm,bcm6345-uart"
-
-- reg: The base address of the UART register bank.
-
-- interrupts: A single interrupt specifier.
-
-- clocks: Clock driving the hardware; used to figure out the baud rate
- divisor.
-
-
-Optional properties:
-
-- clock-names: Should be "refclk".
-
-Example:
-
- uart0: serial@14e00520 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x14e00520 0x18>;
- interrupt-parent = <&periph_intc>;
- interrupts = <2>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- };
-
- clocks {
- periph_clk: periph_clk@0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <54000000>;
- };
- };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
new file mode 100644
index 000000000000..a22285c43f80
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx UART
+
+maintainers:
+ - Rafał Miłecki <rafal@xxxxxxxxxx>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm6345-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: refclk
+
+unevaluatedProperties: false
+
+required:
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ };
--
2.26.2
