The following changes since commit 009c9aa5be652675a06d5211e1640e02bbb1c33d:
Linux 5.13-rc6 (2021-06-13 14:43:10 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-5.14-rc1
for you to fetch changes up to 15279ebe99d7c6142d9f1a6ae4ded66c0f168678:
serial: mvebu-uart: remove unused member nb from struct mvebu_uart (2021-06-25 13:53:51 +0200)
----------------------------------------------------------------
TTY / Serial patches for 5.14-rc1
Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups. Highlights
are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Andreas Färber (1):
dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK1808
Andy Shevchenko (4):
vt: Move custom isspace() to its own namespace
serial: max310x: Try to get crystal clock rate from property
serial: sc16is7xx: Use devm_clk_get_optional()
serial: 8250_exar: Extract exar_get_platform() helper
Baokun Li (1):
tty: tty_ldisc: fix doc warnings in tty_ldisc.c
Biju Das (2):
serial: sh-sci: Add support for RZ/G2L SoC
serial: sh-sci: Add support for RZ/G2L SoC
Christophe JAILLET (5):
serial: 8250: Use 'hlist_for_each_entry' to simplify code
serial: 8250: Add an empty line and remove some useless {}
tty: nozomi: Fix a resource leak in an error handling function
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
Colin Ian King (5):
serial: qcom_geni_serial: redundant initialization to variable line
serial: meson: remove redundant initialization of variable id
serial: kgdb_nmi: remove redundant initialization of variable c
tty: pty: remove redundant initialization of variable fd
ttyprintk: remove redundant initialization of variable i
Dan Carpenter (1):
serial: 8250_omap: fix a timeout loop condition
Daniel Mack (1):
serial: tty: uartlite: fix console setup
Dmitry Baryshkov (1):
serial: qcom_geni_serial: use DT aliases according to DT bindings
Erwan Le Ray (1):
serial: stm32: defer probe for dma devices
Fabien Lahoudere (2):
serial: imx: Add DMA buffer configuration via DT
ARM: dts: imx53-ppd: add dma-info nodes
Geert Uytterhoeven (1):
serial: sh-sci: Remove unused STEPFN() macro
Greg Kroah-Hartman (4):
Revert "serial: sh-sci: Add support for RZ/G2L SoC"
Merge 5.13-rc4 into tty-next
Merge tag 'v5.13-rc6' into tty-next
Revert "tty: serial: Add UART driver for Cortina-Access platform"
Guenter Roeck (1):
tty: hvc_iucv: Drop unnecessary NULL check after container_of
Jason Li (1):
tty: serial: Add UART driver for Cortina-Access platform
Jim Quinlan (1):
serial: 8250: of: Check for CONFIG_SERIAL_8250_BCM7271
Jinchao Wang (1):
serial: Prefer unsigned int to bare use of unsigned
Jiri Slaby (111):
tty: remove broken r3964 line discipline
n_tty: remove n_tty_receive_char wrapper
n_tty: remove n_tty_receive_char_fast
n_tty: drop n_tty_receive_buf_fast
n_tty: drop parmrk_dbl from n_tty_receive_char
n_tty: move lnext handling
n_tty: make n_tty_receive_char_special return void
n_tty: do only one cp dereference in n_tty_receive_buf_standard
n_tty: invert TTY_NORMAL condition in n_tty_receive_buf_standard
n_tty: remove superfluous return from n_tty_receive_signal_char
tty: make fp of tty_ldisc_ops::receive_buf{,2} const
tty: cumulate and document tty_struct::flow* members
tty: cumulate and document tty_struct::ctrl* members
tty: set tty_ldisc_ops::num statically
n_gsm: use goto-failpaths in gsm_init
tty: make tty_ldisc_ops a param in tty_unregister_ldisc
tty: drop tty_ldisc_ops::refcount
tty: no checking of tty_unregister_ldisc
tty: return void from tty_unregister_ldisc
ti-st: use goto-failpath in st_core_init
ti-st: use tty_write_room
tty: make tty_operations::write_room return uint
tty: make tty_buffer_space_avail return uint
tty: remove tty_operations::chars_in_buffer for non-buffering
tty: make tty_operations::chars_in_buffer return uint
nozomi: simplify ntty_chars_in_buffer
tty: remove empty tty_operations::flush_buffer
tty: remove empty tty_operations::set_termios
isdn: capi, remove optional tty ops
isdn: capi, drop useless pr_debugs
tty: remove unused tty_throttle
tty/serial: clean up uart_match_port
tty/serial: make port of serial8250_register_8250_port const
tty: fix kernel-doc for tty_{read,write}
tty: fix kernel-doc for {start,stop}_tty
ipwireless: remove unused ipw_tty::closing
tty: make tty_get_{char,frame}_size available
mxs-auart: redefine AUART_LINECTRL_WLEN to accept bits count
cypress_m8: switch data_bits to real character bits
tty: make use of tty_get_{char,frame}_size
mxser: drop ISA support
mxser: renumber mxser_cards
mxser: remove info printout from init
mxser: integrate mxser.h into .c
mxser: cleanup Gpci_uart_info struct
mxser: rename CheckIsMoxaMust to mxser_get_must_hwid
mxser: rename mxser_board::chip_flag to must_hwid
mxser: introduce enum mxser_must_hwid
mxser: drop constant board::uart_type
mxser: move max_baud from port to board
mxser: remove nonsense from ISR
mxser: cleanup LSR handling in mxser_receive_chars
mxser: extract port ISR
mxser: simplify mxser_interrupt and drop mxser_board::vector_mask
mxser: extract mxser_receive_chars_new
mxser: extract mxser_receive_chars_old
mxser: remove else from LSR bits checks
mxser: correct types for uart variables
mxser: make xmit ring buffer variables unsigned
mxser: drop UART_MCR_AFE and UART_LSR_SPECIAL defines
mxser: drop unused MOXA_DIAGNOSE macro
mxser: remove MOXA_GET_MAJOR deprecated ioctl
mxser: remove MOXA_SET_BAUD_METHOD ioctl
mxser: remove MOXA_ASPP_MON and friends
mxser: remove MOXA_ASPP_LSTATUS ioctl
mxser: remove MOXA_CHKPORTENABLE ioctl
mxser: remove MOXA_GETDATACOUNT ioctl
mxser: remove MOXA_GETMSTATUS ioctl
mxser: remove MOXA_ASPP_OQUEUE ioctl
mxser: remove MOXA_HighSpeedOn ioctl
mxser: remove cnt from mxser_receive_chars
mxser: don't allocate MXSER_PORTS + 1
mxser: drop unused mxser_port::normal_termios
mxser: remove unused mxser_port::stop_rx
mxser: drop mxser_port::baud_base
mxser: drop mxser_port::custom_divisor
mxser: cleanup mxser_change_speed
mxser: extract mxser_ioctl_op_mode
mxser: simplify mxser_ioctl_op_mode
mxser: dedup mxser_must_set_enhance_mode
mxser: introduce mxser_must_select_bank and use it
mxser: clean up the rest of MUST helpers
mxser: move board init into mxser_initbrd
mxser: inline mxser_board_remove into mxser_remove
mxser: pci, switch to managed resources
mxser: move request irq to probe and switch to managed
mxser: remove info message from probe
mxser: remove mxser_cardinfo
mxser: cleanup mxser_process_txrx_fifo
mxser: rework and simplify mxser_open
mxser: make mxser_board::idx really an index
mxser: alloc struct mxser_board dynamically
mxser: alloc only needed # of ports
mxser: remove pointless ioaddr checks
mxser: cleanup mxser_rs_break
mxser: cleanup mxser_dtr_rts
mxser: don't start TX from tty_operations::put_char
mxser: extract and dedup CTS handling
mxser: introduce and use start/stop_tx helpers
mxser: remove xmit_cnt < 0 tests
mxser: decrypt FCR values
mxser: fix typos around enhanced mode
mxser: access info->MCR under info->slock
mxser: use port variable in mxser_set_serial_info
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: introduce mxser_16550A_or_MUST helper
mxser: Documentation, remove traces of callout device
mxser: Documentation, make the docs up-to-date
mxser: Documentation, fix typos
MAINTAINERS: add me back as mxser maintainer
tty: make linux/tty_flip.h self-contained
Johan Hovold (1):
serial: drop irq-flags initialisations
Lad Prabhakar (1):
dt-bindings: serial: renesas,scif: Document r9a07g044 bindings
Lee Jones (8):
tty: vt: selection: Correct misspelled function sel_loadlut()
tty: serdev: core: Fix misspelled function name __serdev_device_driver_register()
tty: tty_buffer: Fix incorrectly documented function __tty_buffer_request_room()
tty: tty_jobctrl: Fix 2 incorrectly documented functions
tty: n_hdlc: Fix a little doc-rot in n_hdlc_tty_read()
tty: serial: st-asc: Demote a kernel-doc formatting abuse
tty: n_gsm: Fix function naming and provide missing param descriptions
tty: serial: xilinx_uartps: Fix documentation for cdns_uart_clk_notifier_cb()
Liang Chen (1):
dt-bindings: serial: snps-dw-apb-uart: add description for rk3568
Lukas Bulwahn (1):
MAINTAINERS: TTY LAYER: add some ./include/linux/ header files
Maciej W. Rozycki (6):
serial: 8250: Dissociate 4MHz Titan ports from Oxford ports
serial: 8250: Correct the clock for OxSemi PCIe devices
serial: 8250: Document SMSC Super I/O UART peculiarities
serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
serial: 8250: Handle custom baud rates in UPF_MAGIC_MULTIPLIER range
MIPS: Malta: Enable magic multipliers for Super I/O UARTs
Michael Walle (9):
serial: fsl_lpuart: don't modify arbitrary data on lpuart32
serial: fsl_lpuart: use UARTDATA_MASK macro
serial: fsl_lpuart: don't restore interrupt state in ISR
serial: fsl_lpuart: split sysrq handling
serial: fsl_lpuart: handle break and make sysrq work
serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()
serial: fsl_lpuart: remove manual RTSCTS control from 8-bit LPUART
serial: fsl_lpuart: add loopback support
serial: fsl_lpuart: disable DMA for console and fix sysrq
Mikko Perttunen (1):
serial: tegra-tcu: Reorder channel initialization
Neil Armstrong (2):
dt-bindings: serial: amlogic, meson-uart: add fifo-size property
tty: serial: meson: retrieve port FIFO size from DT
Ondrej Zary (2):
serial_cs: remove wrong GLOBETROTTER.cis entry
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
Pali Rohár (6):
serial: mvebu-uart: fix calculation of clock divisor
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: correctly calculate minimal possible baudrate
dt-bindings: mvebu-uart: fix documentation
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
Samo Pogačnik (2):
ttyprintk: Add TTY port shutdown callback
ttyprintk: Removed unnecessary TTY ioctl callback
Shaokun Zhang (1):
vt: vt_kern.h, remove the repeated declaration
Sherry Sun (1):
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
Stafford Horne (1):
serial: liteuart: Add support for earlycon
Tian Tao (1):
tty: serial: samsung_tty: remove set but not used variables
Vignesh Raghavendra (2):
dt-bindings: serial: Move omap-serial.txt to YAML schema
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
Xiaofei Tan (18):
tty: tty_baudrate: Remove unnecessary tab and spaces in comment sentence
tty: tty_baudrate: Fix coding style issues of block comments
tty: tty_buffer: Add a blank line after declarations
tty: tty_buffer: Remove the repeated word 'the'
tty: tty_buffer: Fix coding style issues of block comments
tty: tty_io: Remove spaces before tabs
tty: tty_io: Add a blank line after declarations
tty: tty_io: Fix spaces required around that ':'
tty: tty_io: Fix trailing whitespace issues
tty: tty_io: Fix coding style issues of block comments
tty: tty_io: Remove the repeated word 'can'
tty: tty_io: Fix an issue of code indent for conditional statements
tty: tty_io: Delete a blank line before EXPORT_SYMBOL(foo)
tty: tty_io: Remove return in void function
tty: tty_port: Delete a blank line before EXPORT_SYMBOL(foo)
tty: tty_port: Add a blank line after declarations
tty: tty_port: Fix coding style issues of block comments
tty: hvc_console: Remove the repeated words 'no' and 'from'
Yang Yingliang (1):
tty: pty: correct function name pty_resize()
Yoshihiro Shimoda (1):
serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
Zev Weiss (3):
serial: 8250_aspeed_vuart: factor out aspeed_vuart_{read, write}b() helper functions
serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping
Zhen Lei (4):
dt-bindings: serial: Change to reference the kernel-defined serial.yaml
dt-bindings: serial: Add label property in serial.yaml
dt-bindings: serial: pl011: Delete an incorrect compatible string
tty: vcc: use DEVICE_ATTR_*() macro
Zihao Tang (12):
tty: serial: atmel: include <linux/io.h> instead of <asm/io.h>
tty: serial: dz: include <linux/io.h> instead of <asm/io.h>
tty: serial: icom: include <linux/io.h> instead of <asm/io.h>
tty: serial: ip22zilog: include <linux/io.h> instead of <asm/io.h>
tty: serial: mux: include <linux/io.h> instead of <asm/io.h>
tty: serial: pmac_zilog: include <linux/io.h> insteiad of <asm/io.h>
tty: serial: txx9: include <linux/io.h> instead of <asm/io.h>
tty: serial: sunsab: include <linux/io.h> instead of <asm/io.h>
tty: serial: sunsu: include <linux/io.h> instead of <asm/io.h>
tty: serial: sunzilog: include <linux/io.h> instead of <asm/io.h>
tty: serial: vr41xx_siu: include <linux/io.h> instead of <asm/io.h>
tty: serial: sb1250-duart: include <linux/io.h> instead of <asm/io.h>
Documentation/admin-guide/kernel-parameters.txt | 5 +
Documentation/devicetree/bindings/serial/8250.yaml | 2 +-
.../devicetree/bindings/serial/8250_omap.yaml | 118 ++
.../bindings/serial/amlogic,meson-uart.yaml | 5 +
.../bindings/serial/brcm,bcm7271-uart.yaml | 2 +-
.../devicetree/bindings/serial/fsl-imx-uart.yaml | 12 +
.../devicetree/bindings/serial/ingenic,uart.yaml | 2 +-
.../devicetree/bindings/serial/mvebu-uart.txt | 6 +-
.../devicetree/bindings/serial/omap_serial.txt | 40 -
.../devicetree/bindings/serial/pl011.yaml | 13 +-
.../bindings/serial/qca,ar9330-uart.yaml | 4 +-
.../bindings/serial/renesas,em-uart.yaml | 2 +-
.../devicetree/bindings/serial/renesas,scif.yaml | 4 +
.../devicetree/bindings/serial/samsung_uart.yaml | 2 +-
.../devicetree/bindings/serial/serial.yaml | 2 +
.../devicetree/bindings/serial/sifive-serial.yaml | 4 +-
.../bindings/serial/snps-dw-apb-uart.yaml | 4 +-
.../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +-
Documentation/driver-api/serial/moxa-smartio.rst | 496 +----
Documentation/networking/caif/caif.rst | 4 +-
MAINTAINERS | 9 +-
arch/alpha/kernel/srmcons.c | 9 +-
arch/arm/boot/dts/imx53-ppd.dts | 2 +
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
arch/m68k/emu/nfcon.c | 2 +-
arch/mips/mti-malta/malta-platform.c | 3 +-
arch/parisc/kernel/pdc_cons.c | 8 +-
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/um/drivers/line.c | 15 +-
arch/um/drivers/line.h | 5 +-
arch/um/drivers/ssl.c | 1 -
arch/um/drivers/stdio_console.c | 1 -
arch/xtensa/platforms/iss/console.c | 9 +-
drivers/accessibility/speakup/spk_ttyio.c | 9 +-
drivers/bluetooth/hci_ldisc.c | 12 +-
drivers/char/Kconfig | 13 -
drivers/char/pcmcia/synclink_cs.c | 24 +-
drivers/char/ttyprintk.c | 52 +-
drivers/input/serio/serport.c | 8 +-
drivers/ipack/devices/ipoctal.c | 4 +-
drivers/isdn/capi/capi.c | 40 +-
drivers/misc/bcm-vk/bcm_vk_tty.c | 2 +-
drivers/misc/ti-st/st_core.c | 30 +-
drivers/mmc/core/sdio_uart.c | 6 +-
drivers/net/caif/caif_serial.c | 13 +-
drivers/net/can/slcan.c | 10 +-
drivers/net/hamradio/6pack.c | 14 +-
drivers/net/hamradio/mkiss.c | 13 +-
drivers/net/ppp/ppp_async.c | 12 +-
drivers/net/ppp/ppp_synctty.c | 12 +-
drivers/net/slip/slip.c | 9 +-
drivers/net/usb/hso.c | 8 +-
drivers/pps/clients/pps-ldisc.c | 11 +-
drivers/s390/char/con3215.c | 4 +-
drivers/s390/char/sclp_rw.c | 4 +-
drivers/s390/char/sclp_rw.h | 2 +-
drivers/s390/char/sclp_tty.c | 9 +-
drivers/s390/char/sclp_vt220.c | 9 +-
drivers/s390/char/tty3270.c | 22 +-
drivers/staging/fwserial/fwserial.c | 14 +-
drivers/staging/gdm724x/gdm_tty.c | 2 +-
drivers/staging/greybus/uart.c | 22 +-
drivers/tty/Kconfig | 2 +-
drivers/tty/Makefile | 1 -
drivers/tty/amiserial.c | 12 +-
drivers/tty/ehv_bytechan.c | 4 +-
drivers/tty/goldfish.c | 4 +-
drivers/tty/hvc/hvc_console.c | 8 +-
drivers/tty/hvc/hvc_iucv.c | 2 -
drivers/tty/hvc/hvcs.c | 4 +-
drivers/tty/hvc/hvsi.c | 6 +-
drivers/tty/ipwireless/tty.c | 6 +-
drivers/tty/mips_ejtag_fdc.c | 8 +-
drivers/tty/moxa.c | 22 +-
drivers/tty/mxser.c | 1958 ++++++--------------
drivers/tty/mxser.h | 151 --
drivers/tty/n_gsm.c | 34 +-
drivers/tty/n_hdlc.c | 18 +-
drivers/tty/n_null.c | 7 +-
drivers/tty/n_r3964.c | 1283 -------------
drivers/tty/n_tty.c | 201 +-
drivers/tty/nozomi.c | 26 +-
drivers/tty/pty.c | 89 +-
drivers/tty/serdev/core.c | 2 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 54 +-
drivers/tty/serial/8250/8250_core.c | 27 +-
drivers/tty/serial/8250/8250_exar.c | 20 +-
drivers/tty/serial/8250/8250_of.c | 4 +
drivers/tty/serial/8250/8250_omap.c | 22 +-
drivers/tty/serial/8250/8250_pci.c | 172 +-
drivers/tty/serial/8250/8250_port.c | 57 +-
drivers/tty/serial/8250/serial_cs.c | 13 +-
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/amba-pl011.c | 2 +-
drivers/tty/serial/arc_uart.c | 2 +-
drivers/tty/serial/atmel_serial.c | 2 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 19 +-
drivers/tty/serial/dz.c | 4 +-
drivers/tty/serial/fsl_lpuart.c | 135 +-
drivers/tty/serial/icom.c | 2 +-
drivers/tty/serial/imx.c | 27 +-
drivers/tty/serial/ip22zilog.c | 2 +-
drivers/tty/serial/kgdb_nmi.c | 4 +-
drivers/tty/serial/liteuart.c | 21 +
drivers/tty/serial/max310x.c | 40 +-
drivers/tty/serial/meson_uart.c | 8 +-
drivers/tty/serial/mux.c | 2 +-
drivers/tty/serial/mvebu-uart.c | 21 +-
drivers/tty/serial/mxs-auart.c | 26 +-
drivers/tty/serial/omap-serial.c | 10 +-
drivers/tty/serial/pmac_zilog.c | 2 +-
drivers/tty/serial/qcom_geni_serial.c | 22 +-
drivers/tty/serial/samsung_tty.c | 3 +-
drivers/tty/serial/sb1250-duart.c | 2 +-
drivers/tty/serial/sc16is7xx.c | 26 +-
drivers/tty/serial/serial_core.c | 58 +-
drivers/tty/serial/serial_txx9.c | 2 +-
drivers/tty/serial/sh-sci.c | 41 +-
drivers/tty/serial/sh-sci.h | 1 +
drivers/tty/serial/st-asc.c | 4 +-
drivers/tty/serial/stm32-usart.c | 197 +-
drivers/tty/serial/sunsab.c | 2 +-
drivers/tty/serial/sunsu.c | 2 +-
drivers/tty/serial/sunzilog.c | 2 +-
drivers/tty/serial/tegra-tcu.c | 26 +-
drivers/tty/serial/uartlite.c | 27 +-
drivers/tty/serial/vr41xx_siu.c | 2 +-
drivers/tty/serial/xilinx_uartps.c | 12 +-
drivers/tty/synclink_gt.c | 27 +-
drivers/tty/tty_baudrate.c | 13 +-
drivers/tty/tty_buffer.c | 28 +-
drivers/tty/tty_io.c | 198 +-
drivers/tty/tty_ioctl.c | 96 +-
drivers/tty/tty_jobctrl.c | 88 +-
drivers/tty/tty_ldisc.c | 29 +-
drivers/tty/tty_port.c | 18 +-
drivers/tty/ttynull.c | 2 +-
drivers/tty/vcc.c | 24 +-
drivers/tty/vt/keyboard.c | 2 +-
drivers/tty/vt/selection.c | 20 +-
drivers/tty/vt/vt.c | 18 +-
drivers/usb/class/cdc-acm.c | 21 +-
drivers/usb/gadget/function/u_serial.c | 12 +-
drivers/usb/host/xhci-dbgtty.c | 8 +-
drivers/usb/serial/belkin_sa.c | 20 +-
drivers/usb/serial/cypress_m8.c | 21 +-
drivers/usb/serial/pl2303.c | 15 +-
drivers/usb/serial/usb-serial.c | 4 +-
drivers/usb/serial/whiteheat.c | 9 +-
include/linux/n_r3964.h | 175 --
include/linux/serial_8250.h | 2 +-
include/linux/serial_core.h | 5 +-
include/linux/tty.h | 78 +-
include/linux/tty_driver.h | 12 +-
include/linux/tty_flip.h | 4 +-
include/linux/tty_ldisc.h | 6 +-
include/linux/vt_kern.h | 1 -
include/uapi/linux/n_r3964.h | 99 -
net/bluetooth/rfcomm/tty.c | 4 +-
net/nfc/nci/uart.c | 7 +-
sound/soc/codecs/cx20442.c | 4 +-
sound/soc/ti/ams-delta.c | 11 +-
162 files changed, 2104 insertions(+), 5140 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/8250_omap.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt
delete mode 100644 drivers/tty/mxser.h
delete mode 100644 drivers/tty/n_r3964.c
delete mode 100644 include/linux/n_r3964.h
delete mode 100644 include/uapi/linux/n_r3964.h
