[PATCH v5] arm pl011 serial: support multi-irq request

[Bing Fan <hptsfb@xxxxxxxxx>]

From: Bing Fan <tombinfan@xxxxxxxxxxx>

In order to make pl011 work better, multiple interrupts are
required, such as TXIM, RXIM, RTIM, error interrupt(FE/PE/BE/OE);
at the same time, pl011 to GIC does not merge the interrupt
lines(each serial-interrupt corresponding to different GIC hardware
interrupt), so need to enable and request multiple gic interrupt
numbers in the driver.

Signed-off-by: Bing Fan <tombinfan@xxxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c | 34 ++++++++++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 78682c12156a..7bfe8efcc787 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1701,11 +1701,39 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
 	}
 }
 
+static void pl011_release_irq(struct uart_amba_port *uap, unsigned int max_cnt)
+{
+	struct amba_device *amba_dev = container_of(uap->port.dev, struct amba_device, dev);
+	int i;
+
+	for (i = 0; i < max_cnt; i++)
+		if (amba_dev->irq[i])
+			free_irq(amba_dev->irq[i], uap);
+}
+
 static int pl011_allocate_irq(struct uart_amba_port *uap)
 {
+	int ret = 0;
+	int i;
+	unsigned int virq;
+	struct amba_device *amba_dev = container_of(uap->port.dev, struct amba_device, dev);
+
 	pl011_write(uap->im, uap, REG_IMSC);
 
-	return request_irq(uap->port.irq, pl011_int, IRQF_SHARED, "uart-pl011", uap);
+	for (i = 0; i < AMBA_NR_IRQS; i++) {
+		virq = amba_dev->irq[i];
+		if (virq == 0)
+			break;
+
+		ret = request_irq(virq, pl011_int, IRQF_SHARED, dev_name(&amba_dev->dev), uap);
+		if (ret) {
+			dev_err(uap->port.dev, "request %u interrupt failed\n", virq);
+			pl011_release_irq(uap, i - 1);
+			break;
+		}
+	}
+
+	return ret;
 }
 
 /*
@@ -1864,7 +1892,7 @@ static void pl011_shutdown(struct uart_port *port)
 
 	pl011_dma_shutdown(uap);
 
-	free_irq(uap->port.irq, uap);
+	pl011_release_irq(uap, AMBA_NR_IRQS);
 
 	pl011_disable_uart(uap);
 
@@ -1894,7 +1922,7 @@ static void sbsa_uart_shutdown(struct uart_port *port)
 
 	pl011_disable_interrupts(uap);
 
-	free_irq(uap->port.irq, uap);
+	pl011_release_irq(uap, AMBA_NR_IRQS);
 
 	if (uap->port.ops->flush_buffer)
 		uap->port.ops->flush_buffer(port);
-- 
2.17.1