Previously this driver's use of devm_ioremap_resource() led to
duplicated calls to __release_region() when unbinding it (one from
serial8250_release_std_resource() and one from devres_release_all()),
the second of which resulted in a warning message:
# echo 1e787000.serial > /sys/bus/platform/drivers/aspeed-vuart/unbind
[33091.774200] Trying to free nonexistent resource <000000001e787000-000000001e78703f>
With this change the driver uses the generic serial8250 code's
UPF_IOREMAP to take care of the register mapping automatically instead
of doing its own devm_ioremap_resource(), thus avoiding the duplicate
__release_region() on unbind.
In doing this we eliminate vuart->regs, since it merely duplicates
vuart->port->port.membase, which we now use for our I/O accesses.
Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
Reported-by: Andrew Jeffery <andrew@xxxxxxxx>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 249164dc397b..2bf1d8582d9a 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -34,7 +34,6 @@
struct aspeed_vuart {
struct device *dev;
- void __iomem *regs;
struct clk *clk;
int line;
struct timer_list unthrottle_timer;
@@ -66,12 +65,12 @@ static const int unthrottle_timeout = HZ/10;
static inline u8 aspeed_vuart_readb(struct aspeed_vuart *vuart, u8 reg)
{
- return readb(vuart->regs + reg);
+ return readb(vuart->port->port.membase + reg);
}
static inline void aspeed_vuart_writeb(struct aspeed_vuart *vuart, u8 val, u8 reg)
{
- writeb(val, vuart->regs + reg);
+ writeb(val, vuart->port->port.membase + reg);
}
static ssize_t lpc_address_show(struct device *dev,
@@ -429,13 +428,9 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- vuart->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(vuart->regs))
- return PTR_ERR(vuart->regs);
memset(&port, 0, sizeof(port));
port.port.private_data = vuart;
- port.port.membase = vuart->regs;
port.port.mapbase = res->start;
port.port.mapsize = resource_size(res);
port.port.startup = aspeed_vuart_startup;
@@ -492,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.iotype = UPIO_MEM;
port.port.type = PORT_16550A;
port.port.uartclk = clk;
- port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
+ port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
if (of_property_read_bool(np, "no-loopback-test"))
--
2.31.1
