Re: [PATCH v1 4/5] arm64: dts: rockchip: add core dtsi for RK3568 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liang,

Am Mittwoch, 21. April 2021, 08:59:20 CEST schrieb cl@xxxxxxxxxxxxxx:
> From: Liang Chen <cl@xxxxxxxxxxxxxx>
> 
> RK3568 is a high-performance and low power quad-core application processor
> designed for personal mobile internet device and AIoT equipments.
> 
> This patch add basic core dtsi file for it.
> 
> Signed-off-by: Liang Chen <cl@xxxxxxxxxxxxxx>

this is a first round of basic stuff :-) .

First of all, I really like the move of moving the pretty standardized
pinconfig entries to the rockchip-pinconf.dtsi .

(1) But please move this into a separate patch to make that more visible
and maybe even convert _some_ or all arm64 Rockchip socs to use that
as well

"arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs

The pinconfig settings for Rockchip SoCs are pretty similar on all socs,
so move them to a shared dtsi to be included, instead of redefining them
for each soc"

(2) I also like the external rk3568-pinctrl approach with the dtsi getting
auto-generated. This will probably help us in keeping pinctrl settings
synchronous between mainline and the vendor kernel.

(3) From my basic understanding the rk3568 is basically a rk3566 + more
peripherals, so ideally they would share the basic ones in a rk3566.dtsi
which the rk3568.dtsi then could include and extend with its additional
peripherals.

With at least the pine64 boards being based on the rk3566, there probably
will be quite a mainline use of it as well.

Or is there something that would prevent this?


More below:

> ---
>  .../boot/dts/rockchip/rk3568-pinctrl.dtsi     | 2789 +++++++++++++++++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  795 +++++
>  .../boot/dts/rockchip/rockchip-pinconf.dtsi   |  346 ++
>  3 files changed, 3930 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568.dtsi
>  create mode 100644 arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> new file mode 100644
> index 000000000000..92b315763dc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> @@ -0,0 +1,2789 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rockchip-pinconf.dtsi"
> +
> +/*
> + * This file is auto generated by pin2dts tool, please keep these code
> + * by adding changes at end of this file.
> + */
> +&pinctrl {
> +	acodec {
> +		/omit-if-no-ref/
> +		acodec_pins: acodec-pins {
> +			rockchip,pins =
> +				/* acodec_adc_sync */
> +				<1 RK_PB1 5 &pcfg_pull_none>,
> +				/* acodec_adcclk */
> +				<1 RK_PA1 5 &pcfg_pull_none>,
> +				/* acodec_adcdata */
> +				<1 RK_PA0 5 &pcfg_pull_none>,
> +				/* acodec_dac_datal */
> +				<1 RK_PA7 5 &pcfg_pull_none>,
> +				/* acodec_dac_datar */
> +				<1 RK_PB0 5 &pcfg_pull_none>,
> +				/* acodec_dacclk */
> +				<1 RK_PA3 5 &pcfg_pull_none>,
> +				/* acodec_dacsync */
> +				<1 RK_PA5 5 &pcfg_pull_none>;
> +		};
> +	};

can you adapt your pin2dts tool to insert a blank line here please?

> +	audiopwm {
> +		/omit-if-no-ref/
> +		audiopwm_lout: audiopwm-lout {
> +			rockchip,pins =
> +				/* audiopwm_lout */
> +				<1 RK_PA0 4 &pcfg_pull_none>;
> +		};

same here and of course below.

I.e. in a list of subnodes it would be really nice if you could add a blank
line above every subnode - except the first of course ;-)

So,
+	audiopwm {
+		/omit-if-no-ref/
+		audiopwm_lout: audiopwm-lout {

does not get a blank line before audiopwm-lout, but between audiopwn-lout
and the next sub node.


> +		/omit-if-no-ref/
> +		audiopwm_loutn: audiopwm-loutn {
> +			rockchip,pins =
> +				/* audiopwm_loutn */
> +				<1 RK_PA1 6 &pcfg_pull_none>;
> +		};

[...]

> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> new file mode 100644
> index 000000000000..ac8db2f54f2b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -0,0 +1,795 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/clock/rk3568-cru.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,boot-mode.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	compatible = "rockchip,rk3568";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial2 = &uart2;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			clocks = <&scmi_clk 0>;

what is <&scmi_clk 0>.

I see the rk3568 clk-driver defining our standard ARMCLK, so I'd ask for
an explanation (in the commit message maybe) what makes the scmi clk
different and especially what firmware-dependencies arise.

Also it would be very cool if Rockchip could upstream rk3568-support to
mainline TF-A, so that people don't need binary blobs for this.


> +			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
> +		};

blank lines between nodes in the same hierarchy level

> +		cpu1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +		cpu2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +		cpu3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +	};
> +
> +	cpu0_opp_table: cpu0-opp-table {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-408000000 {
> +			opp-hz = /bits/ 64 <408000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +			clock-latency-ns = <40000>;
> +		};
> +		opp-600000000 {
> +			opp-hz = /bits/ 64 <600000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +		};
> +		opp-816000000 {
> +			opp-hz = /bits/ 64 <816000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +			opp-suspend;
> +		};
> +		opp-1104000000 {
> +			opp-hz = /bits/ 64 <1104000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +		};
> +		opp-1416000000 {
> +			opp-hz = /bits/ 64 <1416000000>;
> +			opp-microvolt = <900000 900000 1150000>;
> +		};
> +		opp-1608000000 {
> +			opp-hz = /bits/ 64 <1608000000>;
> +			opp-microvolt = <975000 975000 1150000>;
> +		};
> +		opp-1800000000 {
> +			opp-hz = /bits/ 64 <1800000000>;
> +			opp-microvolt = <1050000 1050000 1150000>;
> +		};
> +		opp-1992000000 {
> +			opp-hz = /bits/ 64 <1992000000>;
> +			opp-microvolt = <1150000 1150000 1150000>;
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,cortex-a55-pmu", "arm,armv8-pmuv3";
> +		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> +	};
> +
> +	firmware {
> +		scmi: scmi {
> +			compatible = "arm,scmi-smc";
> +			shmem = <&scmi_shmem>;
> +			arm,smc-id = <0x82000010>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			scmi_clk: protocol@14 {
> +				reg = <0x14>;
> +				#clock-cells = <1>;
> +			};
> +		};
> +
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		arm,no-tick-in-suspend;
> +	};
> +
> +	xin24m: xin24m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xin24m";
> +	};
> +
> +	xin32k: xin32k {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "xin32k";
> +		#clock-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&clk32k_out0>;
> +	};
> +
> +	scmi_shmem: scmi-shmem@10f000 {
> +		compatible = "arm,scmi-shmem";
> +		reg = <0x0 0x0010f000 0x0 0x100>;

are you sure this works in mainline?

I.e. looking at Documentation/devicetree/bindings/arm/arm,scmi.txt
it talks about arm,scmi-shmem being part of a defined sram area
while the node above seems to be in main memory?


> +	};
> +
> +	gic: interrupt-controller@fd400000 {
> +		compatible = "arm,gic-v3";

reg + interrupts up here below compatible please (+rest alphabetically sorted)


> +		#interrupt-cells = <3>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		interrupt-controller;
> +
> +		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
> +		      <0x0 0xfd460000 0 0xc0000>; /* GICR */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +	};

> diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
> new file mode 100644
> index 000000000000..0c292ef8a87a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
> @@ -0,0 +1,346 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +&pinctrl {

no blank line here please ;-)

The other blank lines below are correct though

And as said at the top, please move into a separate patch and
maybe convert some other Rockchip arm64 socs to it as well ;-) .


> +
> +	/omit-if-no-ref/
> +	pcfg_pull_up: pcfg-pull-up {
> +		bias-pull-up;
> +	};
> +
> +	/omit-if-no-ref/
> +	pcfg_pull_down: pcfg-pull-down {
> +		bias-pull-down;
> +	};
> +
> +	/omit-if-no-ref/
> +	pcfg_pull_none: pcfg-pull-none {
> +		bias-disable;
> +	};
> +


Thanks
Heiko





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux