Re: [PATCH v7 3/6] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dillon

On 3/30/21 4:28 AM, dillon.minfei@xxxxxxxxx wrote:
From: dillon min <dillon.minfei@xxxxxxxxx>

This patch is intend to add support stm32h750 value line,
just add stm32h7-pinctrl.dtsi for extending, with following changes:

- rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
- move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi
   to stm32h743-pinctrl.dtsi
- move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi, to
   fix make dtbs_check warrnings
   arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@40005C00',
   'i2c@58001C00' do not match any of the regexes:
   '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'


You are not so far but sorry I still have a remark:

The pin-controller move in stm32h743.dtsi should be done in this patch. For the moment you don't need to create a dedicate file to only define the compatible string in stm32h743-pinctrl.dtsi. Just add it in stm32h743.dtsi. I'm ok to rename stm32h743-pinctrl.dtsi by stm32h7-pinctrl, and at the end remove stm32h743-pinctrl.dtsi, so don't forget to change the include file for stm32h743 disco and eval dts file.

Regards
Alex


Signed-off-by: dillon min <dillon.minfei@xxxxxxxxx>
---
v7: no changes

  arch/arm/boot/dts/stm32h7-pinctrl.dtsi   | 341 +++++++++++++++++++++++++++++++
  arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +---------------------------
  2 files changed, 347 insertions(+), 301 deletions(-)
  create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi

diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
new file mode 100644
index 000000000000..a5c295eca081
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
@@ -0,0 +1,341 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@xxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+
+	gpioa: gpio@58020000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@58020400 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@58020800 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@58020c00 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@58021000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@58021400 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@58021800 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@58021c00 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@58022000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@58022400 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@58022800 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+				 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet_rmii: rmii-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, AF11)>,
+				 <STM32_PINMUX('G', 13, AF11)>,
+				 <STM32_PINMUX('G', 12, AF11)>,
+				 <STM32_PINMUX('C', 4, AF11)>,
+				 <STM32_PINMUX('C', 5, AF11)>,
+				 <STM32_PINMUX('A', 7, AF11)>,
+				 <STM32_PINMUX('C', 1, AF11)>,
+				 <STM32_PINMUX('A', 2, AF11)>,
+				 <STM32_PINMUX('A', 1, AF11)>;
+			slew-rate = <2>;
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	usart1_pins: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_pins: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	uart4_pins: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
+					 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+					 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
+					 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
+					 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
+					 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
+					 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
+					 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+					 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+					 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+					 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+					 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	spi1_pins: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>,
+				/* SPI1_CLK */
+				 <STM32_PINMUX('B', 5, AF5)>;
+				/* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 9, AF5)>;
+				/* SPI1_MISO */
+			bias-disable;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index fa5dcb6a5fdd..6b1e115307b9 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -1,306 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  /*
- * Copyright 2017 - Alexandre Torgue <alexandre.torgue@xxxxxx>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@xxxxxx> for STMicroelectronics.
   */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32h7-pinctrl.dtsi"
-/ {
-	soc {
-		pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32h743-pinctrl";
-			ranges = <0 0x58020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@58020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA_CK>;
-				st,bank-name = "GPIOA";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiob: gpio@58020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc GPIOB_CK>;
-				st,bank-name = "GPIOB";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioc: gpio@58020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc GPIOC_CK>;
-				st,bank-name = "GPIOC";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiod: gpio@58020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc GPIOD_CK>;
-				st,bank-name = "GPIOD";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioe: gpio@58021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOE_CK>;
-				st,bank-name = "GPIOE";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiof: gpio@58021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc GPIOF_CK>;
-				st,bank-name = "GPIOF";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiog: gpio@58021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc GPIOG_CK>;
-				st,bank-name = "GPIOG";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioh: gpio@58021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc GPIOH_CK>;
-				st,bank-name = "GPIOH";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioi: gpio@58022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOI_CK>;
-				st,bank-name = "GPIOI";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioj: gpio@58022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc GPIOJ_CK>;
-				st,bank-name = "GPIOJ";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiok: gpio@58022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc GPIOK_CK>;
-				st,bank-name = "GPIOK";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c1_pins_a: i2c1-0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
-						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			ethernet_rmii: rmii-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 11, AF11)>,
-						 <STM32_PINMUX('G', 13, AF11)>,
-						 <STM32_PINMUX('G', 12, AF11)>,
-						 <STM32_PINMUX('C', 4, AF11)>,
-						 <STM32_PINMUX('C', 5, AF11)>,
-						 <STM32_PINMUX('A', 7, AF11)>,
-						 <STM32_PINMUX('C', 1, AF11)>,
-						 <STM32_PINMUX('A', 2, AF11)>,
-						 <STM32_PINMUX('A', 1, AF11)>;
-					slew-rate = <2>;
-				};
-			};
-
-			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-				};
-			};
-
-			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
-					bias-pull-up;
-				};
-			};
-
-			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-						 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
-				};
-			};
-
-			usart1_pins: usart1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			usart2_pins: usart2-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
-					bias-disable;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg-hs-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
-							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
-							 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
-							 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
-							 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
-							 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
-							 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
-							 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
-							 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
-							 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
-							 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
-							 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-		};
-	};
+&pinctrl{
+	compatible = "st,stm32h743-pinctrl";
  };




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux