[PATCH v2] sc16is7xx: Defer probe if device read fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A test was added to the probe function to ensure the device was
actually connected and working before successfully completing a
probe.  If the device was actually there, but the I2C bus was not
ready yet for whatever reason, the probe fails permanently.

Change the probe so that we defer the probe on a regmap read
failure so that we try the probe again when the dependent drivers
are potentially loaded.  This should not affect the case where the
device truly isn't present because the probe will never successfully
complete.

Fixes: 2aa916e67db3 ("sc16is7xx: Read the LSR register for basic device presence check")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Annaliese McDermond <nh6z@xxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index f86ec2d2635b..9adb8362578c 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1196,7 +1196,7 @@ static int sc16is7xx_probe(struct device *dev,
 	ret = regmap_read(regmap,
 			  SC16IS7XX_LSR_REG << SC16IS7XX_REG_SHIFT, &val);
 	if (ret < 0)
-		return ret;
+		return -EPROBE_DEFER;
 
 	/* Alloc port structure */
 	s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL);
-- 
2.27.0






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux