There is noone setting nci_uart_ops::recv_buf, so the default one
(nci_uart_default_recv_buf) is always used. So drop this hook, move
nci_uart_default_recv_buf before the use in nci_uart_tty_receive and
remove unused parameter flags.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
---
include/net/nfc/nci_core.h | 2 -
net/nfc/nci/uart.c | 136 ++++++++++++++++++-------------------
2 files changed, 67 insertions(+), 71 deletions(-)
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 43c9c5d2bedb..bd76e8e082c0 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -430,8 +430,6 @@ struct nci_uart_ops {
int (*open)(struct nci_uart *nci_uart);
void (*close)(struct nci_uart *nci_uart);
int (*recv)(struct nci_uart *nci_uart, struct sk_buff *skb);
- int (*recv_buf)(struct nci_uart *nci_uart, const u8 *data, char *flags,
- int count);
int (*send)(struct nci_uart *nci_uart, struct sk_buff *skb);
void (*tx_start)(struct nci_uart *nci_uart);
void (*tx_done)(struct nci_uart *nci_uart);
diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c
index c9987d1cccdf..5cf7d3729d5f 100644
--- a/net/nfc/nci/uart.c
+++ b/net/nfc/nci/uart.c
@@ -229,6 +229,72 @@ static void nci_uart_tty_wakeup(struct tty_struct *tty)
nci_uart_tx_wakeup(nu);
}
+/* -- Default recv_buf handler --
+ *
+ * This handler supposes that NCI frames are sent over UART link without any
+ * framing. It reads NCI header, retrieve the packet size and once all packet
+ * bytes are received it passes it to nci_uart driver for processing.
+ */
+static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data,
+ int count)
+{
+ int chunk_len;
+
+ if (!nu->ndev) {
+ nfc_err(nu->tty->dev,
+ "receive data from tty but no NCI dev is attached yet, drop buffer\n");
+ return 0;
+ }
+
+ /* Decode all incoming data in packets
+ * and enqueue then for processing.
+ */
+ while (count > 0) {
+ /* If this is the first data of a packet, allocate a buffer */
+ if (!nu->rx_skb) {
+ nu->rx_packet_len = -1;
+ nu->rx_skb = nci_skb_alloc(nu->ndev,
+ NCI_MAX_PACKET_SIZE,
+ GFP_ATOMIC);
+ if (!nu->rx_skb)
+ return -ENOMEM;
+ }
+
+ /* Eat byte after byte till full packet header is received */
+ if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) {
+ skb_put_u8(nu->rx_skb, *data++);
+ --count;
+ continue;
+ }
+
+ /* Header was received but packet len was not read */
+ if (nu->rx_packet_len < 0)
+ nu->rx_packet_len = NCI_CTRL_HDR_SIZE +
+ nci_plen(nu->rx_skb->data);
+
+ /* Compute how many bytes are missing and how many bytes can
+ * be consumed.
+ */
+ chunk_len = nu->rx_packet_len - nu->rx_skb->len;
+ if (count < chunk_len)
+ chunk_len = count;
+ skb_put_data(nu->rx_skb, data, chunk_len);
+ data += chunk_len;
+ count -= chunk_len;
+
+ /* Chcek if packet is fully received */
+ if (nu->rx_packet_len == nu->rx_skb->len) {
+ /* Pass RX packet to driver */
+ if (nu->ops.recv(nu, nu->rx_skb) != 0)
+ nfc_err(nu->tty->dev, "corrupted RX packet\n");
+ /* Next packet will be a new one */
+ nu->rx_skb = NULL;
+ }
+ }
+
+ return 0;
+}
+
/* nci_uart_tty_receive()
*
* Called by tty low level driver when receive data is
@@ -250,7 +316,7 @@ static void nci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
return;
spin_lock(&nu->rx_lock);
- nu->ops.recv_buf(nu, (void *)data, flags, count);
+ nci_uart_default_recv_buf(nu, data, count);
spin_unlock(&nu->rx_lock);
tty_unthrottle(tty);
@@ -321,72 +387,6 @@ static int nci_uart_send(struct nci_uart *nu, struct sk_buff *skb)
return 0;
}
-/* -- Default recv_buf handler --
- *
- * This handler supposes that NCI frames are sent over UART link without any
- * framing. It reads NCI header, retrieve the packet size and once all packet
- * bytes are received it passes it to nci_uart driver for processing.
- */
-static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data,
- char *flags, int count)
-{
- int chunk_len;
-
- if (!nu->ndev) {
- nfc_err(nu->tty->dev,
- "receive data from tty but no NCI dev is attached yet, drop buffer\n");
- return 0;
- }
-
- /* Decode all incoming data in packets
- * and enqueue then for processing.
- */
- while (count > 0) {
- /* If this is the first data of a packet, allocate a buffer */
- if (!nu->rx_skb) {
- nu->rx_packet_len = -1;
- nu->rx_skb = nci_skb_alloc(nu->ndev,
- NCI_MAX_PACKET_SIZE,
- GFP_ATOMIC);
- if (!nu->rx_skb)
- return -ENOMEM;
- }
-
- /* Eat byte after byte till full packet header is received */
- if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) {
- skb_put_u8(nu->rx_skb, *data++);
- --count;
- continue;
- }
-
- /* Header was received but packet len was not read */
- if (nu->rx_packet_len < 0)
- nu->rx_packet_len = NCI_CTRL_HDR_SIZE +
- nci_plen(nu->rx_skb->data);
-
- /* Compute how many bytes are missing and how many bytes can
- * be consumed.
- */
- chunk_len = nu->rx_packet_len - nu->rx_skb->len;
- if (count < chunk_len)
- chunk_len = count;
- skb_put_data(nu->rx_skb, data, chunk_len);
- data += chunk_len;
- count -= chunk_len;
-
- /* Chcek if packet is fully received */
- if (nu->rx_packet_len == nu->rx_skb->len) {
- /* Pass RX packet to driver */
- if (nu->ops.recv(nu, nu->rx_skb) != 0)
- nfc_err(nu->tty->dev, "corrupted RX packet\n");
- /* Next packet will be a new one */
- nu->rx_skb = NULL;
- }
- }
-
- return 0;
-}
-
/* -- Default recv handler -- */
static int nci_uart_default_recv(struct nci_uart *nu, struct sk_buff *skb)
{
@@ -403,8 +403,6 @@ int nci_uart_register(struct nci_uart *nu)
nu->ops.send = nci_uart_send;
/* Install default handlers if not overridden */
- if (!nu->ops.recv_buf)
- nu->ops.recv_buf = nci_uart_default_recv_buf;
if (!nu->ops.recv)
nu->ops.recv = nci_uart_default_recv;
--
2.30.1
